<
>
Specifications
Tolerance:
±10%
Capacitance:
2.2uF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MPP225K100D01
Key Attributes
Model Number:
MPP225K100D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor, model 2.2uF K 100VDC, offers high stability of capacitance and dissipation factor across temperature and frequency. It features low loss, high insulation resistance, non-inductive design with self-healing capabilities, and very small inherent temperature rise. This capacitor is ideal for general resonance circuits, DC pulse, high-frequency, and low-current circuits, as well as S-shaping correction in color TV sets, providing optimal performance with a compact size.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen
- Material: Polypropylene film dielectric, vacuum evaporated metal electrodes, epoxy resin coating (fire retardant on request), tinned wire/insulation flexible radial leads.
- Color: Brown (Body)
- Certifications: RoHS Compliant (RoHS 2.0)
Technical Specifications
| Parameter | Description | Value | Test Conditions | ||||||
| Capacitance | Rated Capacitance | 2.2uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | ||||||
| Capacitance Tolerance | Capacity Error | K=10% | |||||||
| Voltage | Rated Voltage | 100VDC | 1.6*UR Unit:VDC (5 S at 20) | ||||||
| Voltage Proof | Withstand Voltage | No permanent breakdown or arcing | |||||||
| Dissipation Factor (tangent of loss) | Loss Tangent | DF0.1% | (at 20,1KHz) Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | ||||||
| Insulation Resistance | C0.33uF | IR30000M | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||||
| C0.33uF | IR*C5000S | ||||||||
| Endurance | Durability | C/C5%; DF0.4%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. | ||||||
| Climatic Catalogue | Climate Category | 40/105/21 | |||||||
| Solder ability | Weldability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Heat Shock | Weld Heat Resistance | C/C5% DF1.2* Capacitor appearance should be free of visible damage after test. | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Lead Tensile Strength | Pin Tensile Strength | No visible damage | Pull: 2.2 LBS; Time: 5 sec | ||||||
| Lead Bending Strength | Pin Bending Strength | No visible damage | Load of lead: 1.1 LBS; The body of capacitor is bent 90 degrees and returned to its original position | ||||||
| Vibration | Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction, total 6 hours | ||||||
| Reference Standard | Cited Standard | IEC 60384-16, GB10190 | |||||||
| Construction | Dielectric | Polypropylene film | |||||||
| Construction | Electrodes | Vacuum evaporated metal | |||||||
| Construction | Coating | Epoxy resin, fire retardant on request | |||||||
| Construction | Leads | Radial leads of tinned wire/insulation flexible wire | |||||||
| Construction | Terminal contact | Electrically welded | |||||||
| Feature | High stability of capacitance and DF versus temperature and frequency | ||||||||
| Feature | Low DF and high IR | ||||||||
| Feature | Non-inductive and self-healing | ||||||||
| Feature | Very small inherent temperature rise | ||||||||
| Application | General resonance circuit | ||||||||
| Application | Widely used in DC pulse, high frequency and low current circuit | ||||||||
| Application | Providing optimum performance with small size of in S-shaping correction of colour TV set | ||||||||
| Marking | On individual capacitor | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)) | UV ink or laser engraving | ||||||
| Marking | On package | Type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | |||||||
| Dimensions | Model | CAP | COLOR | W MAX | H MAX | T MAX | P 1.0 | D 0.05 | L 5.0 |
| Dimensions | MPP225K100 D01 | 2.2uF | Brown | 17.5 | 22.0 | 8.0 | 15.0 | 0.8 | 21.0 |
| Caution | Soldering Suggestion | Maximum Soldering Temperature: 270 for 4S; Pre-heating: 105 for 1min | |||||||
| Caution | Salt fog test | Test after wave peak welding for tin-plated copper-coated steel leads. | |||||||
| Storage | Environment | 30, 70% RH (MBB unopened for 24 months) | |||||||
| Storage | Conditions | Avoid high temperature, high humidity, and atmospheric pollutants (hydrogen chloride, hydrogen sulfide, sulfuric acid). |
2509180925_Jimson-MPP225K100D01_C7431983.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
