<
>
Specifications
Tolerance:
±5%
Voltage Rating:
630V
Capacitance:
47nF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEF473J630D02
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MEF473J630D02
Product Description
Product Overview
This specification details the JIMSON (JS) MEF series capacitors, designed for high reliability and superior performance in low-frequency applications. These non-inductive, self-healing capacitors are ideal for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.
Product Attributes
- Brand: JIMSON (JS)
- Origin: / JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire
- Certifications: RoHS 2.0 compliant
- Color: Brown (Body)
Technical Specifications
| SPECIFICATION | DESCRIPTION | VALUE | TEST CONDITIONS |
| Rated Capacitance | Nominal Values | 0.01uF, 0.022uF, 0.047uF, 0.1uF, 0.22uF, 0.68uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | K | 10% | |
| Rated Voltage | UR | 630VDC | |
| Voltage Proof | 1.6*UR (5 S at 20) | Unit:VDC | No permanent breakdown or flashover |
| Dissipation Factor (DF) | DF0.8% | (C1.0uF) | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| DF1.0% | (C>1.0uF) | ||
| Insulation Resistance (IR) | IR15000M | (C0.33uF) | Measured at rated voltage or less than 100VDC; 1 minute at 20and RH65% |
| IR*C3000S | (C0.33uF) | ||
| Endurance | C/C8%; | 1000 hours with 125% of rated voltage at 85. | |
| DF0.30% | (C1uF) | ||
| DF0.5% | (C1uF) | ||
| Climatic Catalogue | 40/85/21 | ||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat shock | C/C5% DF1.2* | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead tensile strength | Pull2.2 LBS | Time: 5 sec | |
| Lead bending strength | Load of lead1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | Frequency cycle: from 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each directions with a total of 6 hours | ||
| Reference Standard | IEC384-2 grade 1; SJ/T 10787-1996 |
| MODEL | CAPACITANCE | COLOR | W Max | H Max | T Max | P 1.0 | D 0.05 | L +5/-10 |
| 103J630D02 | 0.01uF | Brown | 12.0 | 9.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 223J630D02 | 0.022uF | Brown | 13.0 | 10.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 473J630D02 | 0.047uF | Brown | 13.0 | 10.0 | 6.0 | 10.0 | 0.6 | 25.0 |
| 104J630D01 | 0.1uF | Brown | 18.0 | 14.0 | 8.0 | 15.0 | 0.8 | 25.0 |
| 224K630D03 | 0.22uF | Brown | 23.0 | 15.0 | 9.0 | 20.0 | 0.8 | 25.0 |
| 684K630D01 | 0.68uF | Brown | 30.0 | 22.0 | 13.0 | 27.5 | 0.8 | 25.0 |
| Item | Condition | Parameter | Result |
| Soldering Suggestion | Pre-heating | 105 | 1min |
| Soldering | 270 | 4S | |
| Storage Environment | Temperature | 30 | |
| Humidity | 70% | MBB (Moisture Barrier Bag) not open for 24 months storage | |
| Storage Condition | Atmosphere | Avoid hydrogen chloride, hydrogen sulfide, sulfuric acid | Solderability of terminations will be poor in air |
| Environment | Avoid high temperature and high humidity | Must be stored under 12 of the storage environment |
2410121459_Jimson-MEF473J630D02_C434327.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
