<
>
Specifications
Tolerance:
±5%
Voltage Rating:
100V
Capacitance:
5.6nF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
PEI562J100D01
Package:
Through Hole,P=3mm
Key Attributes
Model Number:
PEI562J100D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. PEI series capacitors are designed for DC and pulsing circuits in various electronic equipment such as radios and televisions. They are also suitable for high voltage applications including energy-saving lamps and mosquito-killer lamps. These capacitors feature small size, light weight, low cost, and a small dissipation factor due to direct lead welding to electrodes. The epoxy resin vacuum-dipping enhances mechanical strength and humidity resistance.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Customer: LICHIP
- Type: PEI
- Origin: Xiamen, China
- Material: Polyester film dielectric, vacuum evaporated metal electrodes, epoxy resin coating (fire retardant on request), tinned wire leads.
- Color: Green (as per dimension table)
- Reference Standards: IEC384-11, SJ/T 10786-1996
Technical Specifications
| Specification | Description | Value | Test Conditions | |||||
| Capacitance | Rated Capacitance | 0.001uF, 0.0022uF, 0.0047uF, 0.0056uF, 0.0068uF, 0.01uF | Measuring frequency: 1kHz10% Measuring voltage: 1Vrms.max. | |||||
| Capacitance tolerance | J=5% | |||||||
| Voltage | Rated voltage | 100VDC | ||||||
| Voltage proof | No permanent breakdown or flashover | 2.0*UR Unit:VDC (5 S at 20) | ||||||
| Dissipation factor (tangent of loss) | 1.0% | Measuring frequency: 1kHz10% Measuring voltage: 1Vrms.max. | ||||||
| Insulation resistance | IR30000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||||
| Endurance | C/C5%; DF1%; IR 50%of the specified value; | 2000 hours with 140% of rated voltage at 85. | ||||||
| Climatic Catalogue | 40/85/21 | |||||||
| Solder ability | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body. Solder should cover at least 75% of the circumference of the lead. | |||||||
| Heat shock | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body. C/C5% DF1.2*. Capacitor appearance should be free from visible damage after test. | |||||||
| Lead tensile strength | Pull: 2.2 LBS, time: 5 sec. Appearance should be free from damage. | |||||||
| Lead bending strength | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. Appearance should be free from damage. | |||||||
| Vibration | Appearance should be free from visible damage. | Frequency cycle: from 10Hz to 55Hz and then 10Hz. Amplitude: 1.5mm in three directions. Time: 2 hours each direction with a total of 6 hours. | ||||||
| Dimensions (mm) | SYMBOL | CAP | W 1.0 | H 1.5 | T 1.0 | P 1.0 | D 0.05 | L MIN |
| 102J100D01 | 0.001uF | 5.0 | 9.5 | 2.5 | 3.0 | 0.5 | 10.0 | |
| 103J100D01 | 0.01uF | 6.0 | 9.0 | 3.5 | 5.0 | 0.5 | 10.0 | |
| 222J100D01 | 0.0022uF | 5.0 | 9.5 | 3.0 | 3.0 | 0.5 | 10.0 | |
| 472J100D01 | 0.0047uF | 5.5 | 10.0 | 3.5 | 3.0 | 0.5 | 10.0 | |
| 562J100D01 | 0.0056uF | 5.0 | 9.5 | 3.5 | 3.0 | 0.5 | 10.0 | |
| 682J100D01 | 0.0068uF | 5.0 | 9.5 | 3.5 | 3.0 | 0.5 | 10.0 | |
2410121458_Jimson-PEI562J100D01_C434415.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
