<
>
Specifications
Tolerance:
±10%
Capacitance:
470nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MPP474K630D07
Key Attributes
Model Number:
MPP474K630D07
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor is designed for general resonance circuits, DC pulse, high frequency and low current circuits, series connection with power supplies, and capacitive divider power supplies. It features high stability of capacitance and dissipation factor versus temperature and frequency, low dissipation factor and high insulation resistance, non-inductive and self-healing properties, and very small inherent temperature rise.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Specification | Description | Value | Test Conditions |
| Rated Capacitance | Nominal Value | 0.47uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | K | 10% | |
| Rated Voltage | 630VDC | 1.6*UR Unit:VDC (5 S at 20) | |
| Voltage Proof | No permanent breakdown or arcing | ||
| Dissipation Factor (tan ) | DF0.1% | (at 20, 1kHz) | |
| Insulation Resistance | C0.33uF | IR30000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance | C0.33uF | IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.4%; IR50% of specified value | 1000 hours with 125% of rated voltage at 85 | |
| Climatic Catalogue | 40/105/21 | ||
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat Shock | C/C5% DF1.2* | Capacitor appearance should be free from visible damage after test | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage to leads | Pull: 2.2 LBS, Time: 5 sec | |
| Lead Bending Strength | No visible damage to leads | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |
| Reference Standard | IEC 60384-16, GB10190 | ||
| Dimensions (mm) | W MAX | 18.0 | |
| Dimensions (mm) | H MAX | 16.0 | |
| Dimensions (mm) | T MAX | 7.0 | |
| Dimensions (mm) | P 1.0 | 15.0 | |
| Dimensions (mm) | D 0.05 | 0.8 | |
| Dimensions (mm) | L 5.0 | 25.0 | (Bending lead) |
2509180925_Jimson-MPP474K630D07_C7431991.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
