<
>
Specifications
Capacitance:
2.2nF
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
MPC222J1000D02
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MPC222J1000D02
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPC Series Capacitors are designed for reliable performance in various electronic applications. Featuring a non-inductive construction with self-healing properties, these capacitors offer excellent moisture resistance and superior physical and environmental characteristics. They are ideal for filtering and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in general communication equipment.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Type: MPC Series
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Encapsulation: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0 compliant)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Construction: Non-inductive
- Self-healing: Yes
- RoHS Compliance: In compliance with RoHS 2.0 environmental directive
Technical Specifications
| Specification | Description | Test Conditions | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacitance | Rated Capacitance: 0.0022uF ~ 0.47uF | Measuring frequency: 1kHz10% Measuring voltage: 1Vrms max. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Capacitance Tolerance | J = 5%, K = 10% | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Voltage | Rated Voltage: 1000VDC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Voltage Proof | 1.6*UR (1 minute at 20) | No permanent breakdown or flashover | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dissipation Factor (tan) | DF 0.1% | at 20, 1kHz (Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Insulation Resistance | C 0.33uF: IR 30000M C > 0.33uF: IR*C 5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Endurance | C/C 5%; DF 0.40%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Climatic Catalogue | 40/85/21 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355 Bath time: 2.00.5 sec Speed: 256 mm/sec Depth: 1.5+0.5/-0mm from the bottom of the body | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Heat Shock | C/C 5%, DF 1.2*specified value. Capacitor appearance should be free from visible damage after the test. | Solder bath: 2605 Bath time: 5.00.5 sec Speed: 256 mm/sec Depth: 1.5+0.5/-0mm from the bottom of the body | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Lead Tensile Strength | No damage to leads. | Pull: 2.2 LBS, Time: 5 sec | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Lead Bending Strength | No damage to leads. | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Vibration | No visible damage to appearance. | Frequency cycle: 10Hz to 55Hz and then 10Hz Amplitude: 1.5mm in three directions Time: 2 hours each direction, total 6 hours. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference Standard | IEC 384-16, GB10190 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions (mm) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Soldering Suggestion | Maximum Soldering Temperature: 270, 4S. Pre-heating: 105, 1min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened for 24 months storage). Avoid high temperature, high humidity, and atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid). |
2410121646_Jimson-MPC222J1000D02_C434152.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
