<
>
Specifications
Tolerance:
±10%
Capacitance:
100nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MRC104K300A06
Key Attributes
Model Number:
MRC104K300A06
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MRC series capacitor is a high-performance component designed for various AC/DC applications. It features a small size with superior performance, suitable for PCB mounting. This capacitor offers a wide selection range of resistance powers (1/4W, 1/2W, 1W) and capacitance values (0.001F to 1.0F), with options for flexible wire, tubular, or box structures. It is ideal for protecting contacts from noise during switching operations, safeguarding electronic instruments, and eliminating electrical noise interference in semiconductor equipment.
Product Attributes
- Brand: JIMSON
- Origin: Xiamen, China
- Certifications: GB/T14472-1998, CQC03001002848, EN132400, IEC60384-14, SE/0364-1C, UL 1283 E152288
- Compliance: RoHS 2.0
Technical Specifications
| SPECIFICATION | DESCRIPTION | VALUE | TEST CONDITIONS |
| SPECIFIC REFERENCE DATA | Capacitance (Rated) | 0.1uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | K=10% | ||
| Rated Voltage | 300VAC | 1.6*UR Unit:VDC (1 minute at 20) | |
| Voltage Proof | No permanent breakdown and arcing | ||
| Resistance | 120 | ||
| ELECTRICAL CHARACTERISTICS | Dissipation Factor (DF) | 9.12% | (at 20,1KHz) Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Insulation Resistance (C0.33uF) | 15000M | measured at rated voltage or less than 100VDC, 1 minute at 20and RH65% | |
| Insulation Resistance (C0.33uF) | IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20and RH65% | |
| ENDURANCE | C/C | 10% (C1uF) | 1000 hours with 125% of rated voltage at 85. |
| DF | 0.8% (C1uF); 0.5% (C>1uF) | ||
| IR | 50% of the specified value | ||
| Resistance | 120 | ||
| CLIMATIC CATALOGUE | 40/100/21 | ||
| SOLDER ABILITY | Solder coverage | 75% of circumference | solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from body |
| Lead tensile strength | Pull: 2.2 LBS, time: 5 sec | Appearance without damage | |
| HEAT SHOCK | C/C | 5% | solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from body |
| DF | 1.2*specified value | ||
| LEAD BENDING STRENGTH | Appearance without damage | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position |
| VIBRATION | Appearance without visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |
| REFERENCE STANDARD | IEC 60384-14, EN60384-14 | ||
| CONSTRUCTION | Dielectric | Polypropylene film | |
| CONSTRUCTION | Electrodes | Vacuum evaporated metal | |
| CONSTRUCTION | Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0) | |
| CONSTRUCTION | Leads | Tinned Wire or polyvinylchloride (PVC) insulation stranded copper wire | |
| CONSTRUCTION | Resistance | Non-Inductive, high pulse resistor | |
| CONSTRUCTION | Terminal contact | Electrically welded | |
| DIMENSION (Example: MRC104K300A06) | W | 18.0 0.5 mm | |
| DIMENSION (Example: MRC104K300A06) | H | 12.0 0.5 mm | |
| DIMENSION (Example: MRC104K300A06) | T | 6.0 0.5 mm | |
| DIMENSION (Example: MRC104K300A06) | P | 15.0 1.0 mm | |
| DIMENSION (Example: MRC104K300A06) | d | 0.6 0.05 mm | |
| DIMENSION (Example: MRC104K300A06) | L | 5.0 0.5 mm |
2509180925_Jimson-MRC104K300A06_C7432011.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
