<
>
Specifications
Capacitance:
10nF
Operating Temperature:
-40℃~+85℃
Tolerance:
±10%
Voltage Rating:
2kV
Mfr. Part #:
MPC103K2000D02
Package:
Through Hole,P=22.5mm
Key Attributes
Model Number:
MPC103K2000D02
Product Description
Product Overview
The JIMSON (JS) MPC Series Capacitor is a non-inductive, self-healing capacitor designed for demanding electronic applications. Featuring a polypropylene film dielectric and vacuum-evaporated metal electrodes, these capacitors offer high moisture resistance and excellent physical and environmental characteristics. They are ideal for filter and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.
Product Attributes
- Brand: JIMSON (JS)
- Customer: (LICHIP)
- Series: MPC
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Encapsulation: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Connection: Electrically welded (arc spot welding)
- Marking Method: UV ink or laser engraving
- Certifications: RoHS Compliant (RoHS 2.0)
Technical Specifications
| Specification | Description | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.001uF, 0.01uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%, K = 10% | |
| Rated Voltage | 2000VDC | |
| Voltage Proof | No permanent breakdown or arcing | 1 minute at 20 |
| Dissipation Factor (DF) | 0.1% | at 20, 1kHz; Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C 0.33uF: IR 30000M C > 0.33uF: IR*C 5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.40%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C 5%, DF 1.2*specified value. No visible damage to capacitor appearance after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage to appearance. | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage to appearance. | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | No visible damage to appearance. | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | IEC 384-16, GB10190 | |
| Model Number | 102J2000D02 | 0.001uF, J (5%), 2000VDC |
| Model Number | 103K2000D02 | 0.01uF, K (10%), 2000VDC |
| Dimensions (mm) | W 0.5, H 0.5, T 0.5, P 1.0, D 0.05, L +5/-10 | |
| Dimensions (for 102J2000D02) | W: 18.0, H: 10.0, T: 5.0, P: 15.0, D: 0.8, L: 25.0 | Color: Yellow |
| Dimensions (for 103K2000D02) | W: 26.5, H: 17.0, T: 10.0, P: 22.5, D: 0.8, L: 25.0 | Color: Yellow |
| Soldering Suggestion (Max Temp) | 270 | Time: 4S (Pre-heating: 105, 1min) |
| Storage Environment | Temperature 30, Humidity 70% (in MBB) | 24 months storage period if MBB is not opened. |
| Storage Condition | Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. | Store under specified storage environment. |
2410121646_Jimson-MPC103K2000D02_C434283.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
