Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPC series capacitors are non-inductive, self-healing capacitors designed for a wide range of electronic applications. They offer high moisture resistance, excellent physical properties, and environmental adaptability. These capacitors are ideal for filtering and noise suppression, pulse, logic, and timing circuits, DC blocking, by-passing, and signal coupling in communication equipment. They also provide protection against peak voltage and current in power electronic equipment.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Connection: Electrically welded (Arc spot welding)
- Marking Method: UV ink or laser engraving
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions |
| Rated Capacitance | 0.01-60uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5% / K=10% | |
| Rated Voltage | 250-2000VDC | |
| Voltage Proof | 1.6*U (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (DF) | DF0.1% (C10uF) | at 20, 1KHz, Measuring voltage: 1Vrms.max. |
| Dissipation Factor (DF) | DF0.2% (C<10uF) | at 20, 1KHz, Measuring voltage: 1Vrms.max. |
| Insulation Resistance (IR) | IR30000M (C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance (IR) | IR*C5000S (C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. Visual inspection for damage required. |
| Lead Tensile Strength | Visual inspection for damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Visual inspection for damage | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | Visual inspection for damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours). |
Dimensions
| Symbol | CAP (uF) | Color | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | Remarks |
| MPC103J2000D02 | 0.01 | YELLOW | 18*12*6 | 25 | 15 | 0.6 | L25 P15 CP0.6 |
| MPC104J630D04 | 0.1 | YELLOW | 18*18*10 | 25 | 15 | 0.8 | |
| MPC104K520D01 | 0.1 | YELLOW | 13*12*6 | 25 | 10 | 0.6 | L25 P10 CP0.6 |
| MPC105J1000D01 | 1.0 | YELLOW | 32*20*11 | 3.8 | 27.5 | 0.8 | L3.8 P27.5 CP0.8 |
| MPC105K1000D02 | 1.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | 1.0 | L25 P37.5 CP1.0 |
| MPC105K450D01 | 1.0 | YELLOW | 18*18*10 | 23 | 15 | 0.8 | L23 P15 CP0.8 |
| MPC106J650D01 | 10.0 | YELLOW | 41.5*24*19 | 21 | 37.5 | 0.8 | B=12.7 |
| MPC155K100D01 | 1.5 | YELLOW | 15*17*7 | 20 | 12.5 | 0.8 | L20 P12.5 CU0.8 |
| MPC155K450D01 | 1.5 | YELLOW | E8 | 25 | 22.5 | 0.8 | L25 P22.5 CP0.8 |
| MPC156K1200D01 | 15.0 | YELLOW | 42.5*38*25 | 21 | 37.5 | 0.8 | L21 P37.5 CU0.8 |
| MPC156K900D01 | 15.0 | BLACK | 42*36*23 | 25 | 37.5 | 0.8 | |
| MPC224J630A01 | 0.22 | YELLOW | 18*16*10 | 25 | 15 | 0.6 | L25 P15 CP0.6 |
| MPC226K1200D01 | 22.0 | YELLOW | 58*40*28 | 21 | 52.5 | 1.0 | |
| MPC332J1000D02 | 0.0033 | YELLOW | 13*9*4 | 25 | 10 | 0.6 | L25 P10 CP0.6 |
| MPC332J2000D01 | 0.0033 | YELLOW | 18*12*6 | 25 | 6 | 0.6 | L25 CP0.6 |
| MPC333K1000A01 | 0.033 | YELLOW | 18*12*6 | 25 | 15 | 0.8 | L25 P15 CP0.8 |
| MPC335K250D01 | 3.3 | YELLOW | 31*25*14 | 25 | 27.5 | 0.8 | L25 P27.5 CP0.8 |
| MPC335K450D01 | 3.3 | YELLOW | 32*20*11 | 25 | 27.5 | 0.8 | L25 P27.5 CP0.8 |
| MPC473J630D05 | 0.047 | YELLOW | 18*12*6 | 3.8 | 15 | 0.6 | L3.8 P15 CP0.6 |
| MPC504J1000D01 | 0.05 | BLACK | 38*30*20 | 21 | 30.5 | 0.8 | |
| MPC504J1000D02 | 0.05 | YELLOW | 32*33*18 | 3.5 | 27.5 | 1.0 | |
| MPC565M250D01 | 5.6 | YELLOW | 31*25*14 | 30 | 27.5 | 0.8 | L30 P27.5 CP0.8 |
| MPC605K1200D01 | 6.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | 1.0 | L25 P37.5 CP1.0 |
| MPC606K500D01 | 60.0 | YELLOW | 42.5*50*35 | 21 | 37.5 | 0.8 | B=20.3 |
| MPC805K1000D01 | 8.0 | YELLOW | 32*37*22 | 23 | 27.5 | 0.8 | L23 P27.5 CP0.8 |
Caution
Soldering Suggestion: Maximum Soldering Temperature: 270, Time: 4S. Pre-heating: 105, 1min.
Salt Fog Test Condition: The lead wire of this product is tin-plated copper-coated steel. Please test the salt mist after wave soldering.
Storage Environment and Conditions
Storage Environment: Store at temperature 30, humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures a 24-month storage period.
Storage Condition: Due to atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid, etc.), lead solderability may degrade. Store in air within the specified environment conditions (30, 70% RH). Avoid high temperature and high humidity exposure.
2410121441_Jimson-MPC104K520D01_C7431936.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
