Product Overview
The JIMSON MEB series capacitors are polyester film capacitors designed for DC and pulse circuits. They offer small size, low loss, good stability, and excellent self-healing properties for long life. These capacitors are widely used in coupling, filtering, noise suppression, and by-passing applications across various consumer and industrial electronic devices.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Rated Capacitance | Capacitance Tolerance | Rated Voltage | Voltage Proof | Dissipation Factor (DF) | Insulation Resistance (IR) | Endurance | Climatic Catalogue | Solderability | Heat Shock | Lead Tensile Strength | Lead Bending Strength | Vibration | Reference Standard |
| 0.001uF~1.5uF | J=5%, K=10% | 63VDC | 1.6*UR Unit:VDC (1 minute at 20) No permanent breakdown or flashover | ≤1.0% (1kHz, 1Vrms max) | C≤0.33uF: IR≥5000MΩ C>0.33uF: IR*C≥3000S (Rated voltage or <100VDC, 1 min at 20, RH≤65%) | △C/C≤5%; △DF≤0.20% (1000 hours with 125% rated voltage at 85) | 40/85/21 | Solder bath: 235±5, 2.0±0.5 sec, speed: 25±6 mm/sec, depth: 1.5+0.5/-0mm from bottom of body. Solder should cover at least 75% of the circumference of the lead. | Solder bath: 260±5, 5.0±0.5 sec, speed: 25±6 mm/sec, depth: 1.5+0.5/-0mm from bottom of body. △C/C≤±5%, DF≤1.2*specified value. No visible damage after test. | Pull: 2.2 LBS, time: 5 sec. No visible damage. | Load: 1.1 LBS. Body bent 90 degrees and returned to original position. No visible damage. | Frequency cycle: 10Hz to 55Hz to 10Hz, Amplitude: 1.5mm in 3 directions, Time: 2 hours each direction (total 6 hours). No visible damage. | IEC60384-2, GB7322 |
Dimensions
| SYMBOL | CAP | COLOR | W ±1.0 | H ±1.0 | T ±1.0 | P ±1.0 | D ±0.05 | L MIN |
| 102J63D01 | 0.001uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 222J63D01 | 0.0022uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 472J63D01 | 0.0047uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 562J63D01 | 0.0056uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 153J63D01 | 0.015uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 103J63D01 | 0.01uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 223J63D01 | 0.022uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 223K63VDC | 0.022uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.6 | 15.0 |
| 333J63D01 | 0.033uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 473J63D01 | 0.047uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 683J63D01 | 0.068uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 823J63D01 | 0.082uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 104J63D01 | 0.1uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 154J63D01 | 0.15uF | Gray | 7.2 | 7.5 | 3.5 | 5.0 | 0.5 | 15.0 |
| 224J63D01 | 0.22uF | Gray | 7.2 | 6.5 | 2.5 | 5.0 | 0.5 | 15.0 |
| 334J63D01 | 0.33uF | Gray | 7.2 | 9.5 | 4.5 | 5.0 | 0.6 | 15.0 |
| 474J63D01 | 0.47uF | Gray | 7.2 | 10.0 | 5.0 | 5.0 | 0.6 | 15.0 |
| 564J63D01 | 0.56uF | Gray | 7.2 | 9.5 | 4.5 | 5.0 | 0.6 | 15.0 |
| 684J63D01 | 0.68uF | Gray | 7.2 | 9.5 | 4.5 | 5.0 | 0.6 | 15.0 |
| 155J63D01 | 1.5uF | Gray | 7.2 | 11.0 | 6.0 | 5.0 | 0.6 | 15.0 |
Caution
Soldering Suggestion
Maximum Soldering Temperature: Pre-heating 105 1min, Soldering 270 4S.
Storage Environment and Conditions
Storage Environment: Store at temperature ≤30, humidity ≤70%. Unopened MBB (Moisture Barrier Bag) ensures 24 months of storage.
Storage Condition: Due to atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid, etc.), solderability of terminations may degrade when stored in air. Products must not be exposed to high temperature and high humidity; store under the conditions specified in section 12.1.
2410121458_Jimson-MEB684J063D02_C434142.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible