<
>
Specifications
Capacitance:
220nF
Ratings:
X2
Voltage(AC):
275V
Tolerance:
±10%
Mfr. Part #:
MKP224K275A27
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MKP224K275A27
Product Description
Product Overview
The JIMSON MKP224K275A27 is a high-stability X2 class capacitor designed for a wide range of applications including line-by-pass, antenna coupling, across-the-line spark killing, FMI filters, and switching power supplies. It offers high current endurance, excellent dielectric strength, long-term stability, and over-voltage resistance, making it a reliable choice for demanding electronic circuits.
Product Attributes
- Manufacturer: () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Color: Yellow (for MKP224K275A27)
- Certifications: UL, VDE, ENEC, CQC, CB, KC
- RoHS Compliance: Compliant with RoHS 2.0
Technical Specifications
| Parameter | Description | Value | Test Conditions |
|---|---|---|---|
| Rated Capacitance | 0.22uF | Measuring frequency: 1kHz, Measuring voltage: 1Vrms | |
| Capacitance Tolerance | K=10% | ||
| Rated Voltage | 275VAC | ||
| Voltage Proof | 4.3*U (Unit:VDC) | Withstands 1 minute at 20 without permanent breakdown or arcing | |
| Dissipation Factor (DF) | DF0.1% | at 20, 1KHz | Measuring frequency: 1kHz, Measuring voltage: 1Vrms |
| Dissipation Factor (DF) | DF3.0% | at 20, 100KHz | Measuring frequency: 100kHz, Measuring voltage: 1Vrms |
| Insulation Resistance (IR) | IR15000M | for C0.33uF | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance (IR) | IR*C5000S | for C0.33uF | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C10%, DF0.8% (C1uF) | 1000 hours with 125% of rated voltage at 85 | |
| Endurance | DF0.5%;(C>1uF) | 1000 hours with 125% of rated voltage at 85 | |
| Endurance | IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85 | |
| Climatic Catalogue | 40/100/21 | ||
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. No visible damage to capacitor appearance after test. | |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS | Time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions | Time: 2 hours each direction, total 6 hours |
| Reference Standard | IEC 60384-14, UL60384 | ||
| Construction - Dielectric | Polypropylene film | ||
| Construction - Electrodes | Vacuum evaporated metal | ||
| Construction - Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0) | ||
| Construction - Leads | Radial leads of tinned wire/insulation flexible wire | ||
| Construction - Terminal contact | Electrically welded | ||
| Safety Approvals | UL | E152288 | Canada / America |
| Safety Approvals | VDE (EN60384-14) | 40000463 | Germany |
| Safety Approvals | VDE(EN60384-14) EN/EC | 40000463 | Europe |
| Safety Approvals | CQC (IEC60384-14 ed.4 | CQC03001002847 | China |
| Safety Approvals | CBIEC60384-14 | US-25278-UL | IEC |
| Safety Approvals | KCK60384-14 | SUO3035-7002-3A | KOREA |
| Marking | Manufacturer: JIMSON | UV ink or laser engraving | |
| Marking | Manufacturers type designation: MKP | UV ink or laser engraving | |
| Marking | Rated capacitance in uF, e.g., 0.22uF | UV ink or laser engraving | |
| Marking | Tolerance: K=10% | UV ink or laser engraving | |
| Marking | Rated voltage (AC), e.g., 275VAC | UV ink or laser engraving | |
| Marking | Climatic catalogue: GMF | UV ink or laser engraving | |
| Marking | Sub-class: X2 | UV ink or laser engraving | |
| Marking | Safety approvals: Marked with all achieved approvals | UV ink or laser engraving | |
| Marking | Reference standard: IEC384-14 | UV ink or laser engraving | |
| Capacitance Code | e.g., 224 | 22 10^4 pF = 0.22uF | First two digits are significant figures, third digit is number of zeros (in pF) |
| Capacitance Tolerance Symbol | K | 10% | |
| Rated Voltage Symbol | 275 | 275V | (Part of the model number, e.g., 275A) |
| Pitch | 15 mm | (for MKP224K275A27) | |
| Lead Diameter (D) | 0.8 mm | 0.05 | (for MKP224K275A27) |
| Lead Length (L) | 3.8 mm | 0.5 | (for MKP224K275A27) |
| Dimensions (W*H*T) | 18.0*14.5*8.5 mm | 0.5 | (for MKP224K275A27) |
| Storage Environment | Temperature 30, Humidity 70% (in MBB) | Ensures 24 months storage period if MBB is not opened. Avoid high temperature, high humidity, and atmospheric pollutants. | |
| Soldering Suggestion | Maximum Soldering Temperature: 270, Time: 4S | Pre-heating: 105, 1min |
2412191054_Jimson-MKP224K275A27_C2848139.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
