<
>
Specifications
Capacitance:
330nF
Operating Temperature:
-40℃~+85℃
Tolerance:
±10%
Voltage Rating:
630V
Mfr. Part #:
MPP334K630D01
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MPP334K630D01
Product Description
Product Overview
The JIMSON (JS) MPP Capacitor is a high-stability, low-loss capacitor designed for general resonance circuits, DC pulse, high-frequency, and low-current applications. It features a non-inductive, self-healing construction with very small inherent temperature rise, making it ideal for demanding electronic circuits, including S-shaping correction in color TV sets. Manufactured by (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.), these capacitors are compliant with RoHS 2.0 environmental directives.
Product Attributes
- Brand: JIMSON (JS)
- Manufacturer: (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Color: Brown
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Specification | Description / Value | Test Conditions |
|---|---|---|
| Capacitance Range | 0.0022uF ~ 1.0uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 630VDC, 63VDC | |
| Voltage Proof | No permanent breakdown or flashover | 1.6*UR Unit:VDC (5 S at 20) |
| Dissipation Factor (DF) | 0.1% | at 20, 1KHz; Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Insulation Resistance (IR) | C0.33uF: IR30000M C > 0.33uF: IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.4%; IR50% of specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | |
| Construction | Dielectric: Polypropylene film; Electrodes: Vacuum evaporated metal; Coating: Epoxy resin; Leads: Radial tinned wire/insulation flexible wire; Terminal contact: Electrically welded | |
| Features | High stability of capacitance and DF vs. temperature and frequency; Low DF and high IR; Non-inductive and self-healing; Very small inherent temperature rise. | |
| Application | General resonance circuit; DC pulse, high frequency and low current circuit; S-shaping correction of color TV set. | |
| Marking (Individual Capacitor) | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)) | Printing method: UV ink or laser engraving |
| Marking (Package) | Product model, rated capacitance and voltage, date of manufacture, location of manufacture, manufacturer's name | |
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |
| Capacitance Tolerance Symbols | F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |
| Dissipation Factor Measurement | Measured at 20 and 1kHz as the standard condition. | |
| Insulation Resistance Measurement | T=20 and RH65%. For higher capacitance values, measured as a time constant (IR*C in MF). | |
| Self-healing | Metallized film capacitors can withstand a break-through without a permanent short circuit. | |
| High Temperature Test | Capacitance drift: +5% max of initial value; DF: <0.2% (at 1KHz) | +85, after thermal stability |
| Low Temperature Test | Capacitance drift: -5% max of initial value; DF: <0.15% (at 1KHz) | -40, after thermal stability |
| Humidity Test (Steady State) | Capacitance drift: +3% max of initial value; DF: <0.20% (at 1KHz); IR: >50% of initial value. | 403, 90-95% RH for 964% hrs, then 16 hrs at room conditions. |
| Soldering Suggestion (Max Temp) | Pre-heating: 105 for 1 min; Soldering: 270 for 4 sec. | |
| Salt Fog Test Note | Perform after wave peak welding. | |
| Storage Environment | Temperature 30, Humidity 70% | MBB not open: 24 months storage period. Avoid atmospheric contaminants (HCl, H2S, H2SO4) and high temperature/humidity. |
| Model Example: 222J630D01 | Capacitance: 0.0022uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 8.0mm, T MAX: 5.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 103J630D01 | Capacitance: 0.01uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 12.0mm, H MAX: 10.0mm, T MAX: 6.8mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 223J630D01 | Capacitance: 0.022uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 10.0mm, T MAX: 6.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 273J630D01 | Capacitance: 0.027uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 12.0mm, T MAX: 7.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 104K630D02 | Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 11.0mm, T MAX: 8.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 104K630D03 | Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 12.5mm, T MAX: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 224J630VDC | Capacitance: 0.22uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 14.5mm, T MAX: 9.0mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 105K630D04 | Capacitance: 1.0uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 15.0mm, T MAX: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 334K630D01 | Capacitance: 0.33uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 12.0mm, T MAX: 7.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 564K630D01 | Capacitance: 0.56uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 14.0mm, T MAX: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 684K630D05 | Capacitance: 0.68uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 15.0mm, T MAX: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 474J630D06 | Capacitance: 0.47uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 26.5mm, H MAX: 21.5mm, T MAX: 12.0mm, P: 22.5mm, D: 0.8mm, L: 25.0mm |
| Model Example: 105J063D01 | Capacitance: 1.0uF, Tolerance: J (5%), Voltage: 63VDC | W MAX: 18.0mm, H MAX: 16.0mm, T MAX: 9.0mm, P: 15.0mm, D: 0.8mm, L: 3.8mm |
| Model Example: 472J630D02 | Capacitance: 0.0047uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 10.0mm, H MAX: 9.0mm, T MAX: 5.0mm, P: 7.5mm, D: 0.6mm, L: 3.8mm |
2304140030_Jimson-MPP334K630D01_C434357.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
