<
>
Specifications
Capacitance:
2.2uF
Ratings:
X2
Voltage(AC):
310V
Tolerance:
±10%
Mfr. Part #:
MKP225K310A01
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
MKP225K310A01
Product Description
Product Overview
The JIMSON MKP X2 capacitor is designed for a wide range of applications, offering high stability, transient endurance, and long-term reliability. It features a polypropylene film dielectric with vacuum-evaporated metal electrodes, encapsulated in a flame-retardant plastic case. This capacitor is suitable for line-by-pass, antenna coupling, across-the-line applications, spark killers, FMI filters, and switching power supplies.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Encapsulation: Reinforced flame retardant plastic case, sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Certifications: UL, VDE, ENEC, CQC, CB, KC
- RoHS Compliance: Yes
Technical Specifications
| Parameter | Description | Value | Test Conditions | |||||
| Capacitance | Rated Capacitance | 0.022uF~4.7uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |||||
| Capacitance Tolerance | K=10% | |||||||
| Voltage | Rated Voltage | 310VAC | ||||||
| Voltage Proof | 4.3*UR VDC (1 minute at 20) | No permanent breakdown or flashover | ||||||
| Dissipation Factor | DF0.1% | (at 20,1KHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||||
| Insulation Resistance | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||||
| C0.33uF | IR*C5000S | |||||||
| Endurance | C/C10%; DF0.8% (C1uF) | 1000 hours with 125% of rated voltage at 85. | ||||||
| DF0.5%;(C>1uF) | ||||||||
| IR 50% of the specified value | ||||||||
| Climatic Catalogue | 40/100/21 | |||||||
| Solderability | Solder should cover at least 75% of the circumference of the lead | solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Heat Shock | C/C5% DF1.2* | solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Lead Strength | Tensile Strength | Appearance without damage | Pull: 2.2 LBS, time: 5 sec | |||||
| Bending Strength | Appearance without damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | ||||||
| Vibration | Appearance without visible damage | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each directions with a total of 6 hours | ||||||
| Reference Standard | IEC 60384-14, UL60384-14 | |||||||
| Dimensions (Unit: mm) | ||||||||
| Symbol | CAP | COLOR | W 0.5 | H 0.5 | T 0.5 | P 1.0 | D 0.05 | L +5/-10 |
| 223K310A02 | 0.022uF | Yellow | 13.0 | 11.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 473K310A02 | 0.047uF | Yellow | 18.0 | 12.0 | 6.0 | 15.0 | 0.6 | 25.0 |
| 104K310A02 | 0.1uF | Yellow | 18.0 | 12.0 | 6.0 | 15.0 | 0.8 | 25.0 |
| 154K310A01 | 0.15uF | Yellow | 18.0 | 18.0 | 10.0 | 15.0 | 0.8 | 25.0 |
| 334K310A01 | 0.33uF | Yellow | 18.0 | 16.0 | 10.0 | 15.0 | 0.8 | 25.0 |
| 474K310A04 | 0.47uF | Yellow | 26.5 | 18.5 | 10.0 | 22.5 | 0.8 | 25.0 |
| 684K310A01 | 0.68uF | Yellow | 26.5 | 22.0 | 12.0 | 22.5 | 0.8 | 25.0 |
| 105K310A01 | 1.0uF | Yellow | 26.5 | 22.0 | 12.0 | 22.5 | 0.8 | 30.0 |
| 335K310A01 | 3.3uF | Yellow | 32.0 | 28.0 | 18.0 | 27.5 | 0.8 | 25.0 |
2410121459_Jimson-MKP225K310A01_C434233.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
