<
>
Specifications
Capacitance:
470nF
Operating Temperature:
-40℃~+85℃
Tolerance:
±5%
Voltage Rating:
1.6kV
Mfr. Part #:
MPP474J1600D01
Package:
Through Hole,P=31.5mm
Key Attributes
Model Number:
MPP474J1600D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor is designed for general resonance circuits, DC pulse, high-frequency, and low-current applications. These capacitors offer high stability of capacitance and dissipation factor (DF) across varying temperatures and frequencies, coupled with low loss and high insulation resistance. Their non-inductive and self-healing properties, along with very small inherent temperature rise, make them suitable for demanding electronic circuits, including S-shaping correction in color television sets where small size and superior performance are required.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Certifications: RoHS 2.0 Compliant
- Marking: UV ink or laser engraving
Technical Specifications
| Specification | Description | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.0039F ~ 0.47F | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5% K = 10% | |
| Rated Voltage | 1600VDC | 1.6*UR Unit:VDC (5s at 20) |
| Voltage Proof | No permanent breakdown or arcing | |
| Dissipation Factor (tan) | DF 0.1% | at 20, 1kHz; Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C 0.33F: IR 30000 M C > 0.33F: IR*C 5000S | Measured at rated voltage or less than 100VDC for 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.4%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C 5%; DF 1.2*specified value; No visible damage after test | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS; Time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS; The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | |
| Model Example | 392J1600D01 | 0.0039F, J tolerance, 1600VDC |
| Model Example | 474J1600D01 | 0.47F, J tolerance, 1600VDC |
| Model Example | 474K1600D01 | 0.47F, K tolerance, 1600VDC |
| Dimensions (Example: 392J1600D01) | CAP: 13.0mm (W MAX), 9.0mm (H MAX), 6.0mm (T MAX) | P: 10.0mm (1.0), D: 0.6mm (0.05), L: 25.0mm (+5/-10) |
| Dimensions (Example: 474J1600D01 / 474K1600D01) | CAP: 35.0mm (W MAX), 27.0mm (H MAX), 17.0mm (T MAX) | P: 31.5mm (1.0), D: 0.8mm (0.05), L: 25.0mm (+5/-10) |
| Soldering Suggestion | Max Soldering Temperature: 270, Time: 4s; Pre-heating: 105, 1min | |
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened for 24 months) | Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature, and high humidity. |
2410121450_Jimson-MPP474J1600D01_C434359.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
