<
>
Specifications
Capacitance:
1uF
Tolerance:
±10%
Voltage Rating:
1.2kV
Mfr. Part #:
MPA105K1200D01
Package:
Through Hole,23x46mm
Key Attributes
Model Number:
MPA105K1200D01
Product Description
Product Overview
The JIMSON MPA series capacitors are designed for a wide range of electronic applications. Featuring a non-inductive construction and self-healing properties, these capacitors offer low dissipation factor (DF) and high insulation resistance (IR), resulting in very small inherent temperature rise. They are ideal for coupling, decoupling, by-passing, timing circuits, across-the-line applications, spark killers, charging/discharging circuits, lighting, noise suppression, and frequency modulation.
Product Attributes
- Brand: JIMSON (JS)
- Customer: (LICHUANG)
- Product Type: Capacitor
- Series: MPA
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Out wrapped with Mylar tape and ends sealed with epoxy resin
- Leads: Solder-plated copper-clad wire
- Terminal Contact: Electrically welded
- Certifications: RoHS Compliant (RoHS 2.0)
- Origin: Xiamen, China
Technical Specifications
| Model | Rated Capacitance | Capacitance Tolerance | Rated Voltage | W (Max) | H (Max) | T (Max) | P (±1.0) | d (±0.05) | L (±5.0) | Color |
|---|---|---|---|---|---|---|---|---|---|---|
| 104K1200D01 | 0.1uF | K (±10%) | 1200VDC | 26.0 mm | 15.0 mm | 8.5 mm | 26.0 mm | 0.8 mm | 35.0 mm | Brown |
| 224K1200D01 | 0.22uF | K (±10%) | 1200VDC | 26.0 mm | 19.0 mm | 12.0 mm | 26.0 mm | 0.8 mm | 40.0 mm | Brown |
| 474K1200D01 | 0.47uF | K (±10%) | 1200VDC | 32.0 mm | 25.0 mm | 16.0 mm | 32.0 mm | 0.8 mm | 40.0 mm | Brown |
| 105K1200D01 | 1.0uF | K (±10%) | 1200VDC | 46.0 mm | 23.0 mm | 14.0 mm | 46.0 mm | 0.8 mm | 35.0 mm | Brown |
| Specification | Value | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.1uF, 0.22uF, 0.47uF, 1.0uF | Frequency: 1kHz±10%, Voltage: 1Vrms max. |
| Capacitance Tolerance | K = ±10% | |
| Rated Voltage | 1200VDC | 1.6*UR, 5s at 20 |
| Voltage Proof | No permanent breakdown or flashover | |
| Dissipation Factor (DF) | ≤0.1% | Frequency: 1kHz±10%, Voltage: 1Vrms max. |
| Insulation Resistance (IR) | C ≤ 0.33uF: ≥ 30000MΩ C > 0.33uF: IR*C ≥ 5000S | Rated voltage or less than 100VDC, 1 minute at 20 and RH≤65% |
| Endurance | ΔC/C ≤ 5%; ΔDF ≤ 0.40%; IR ≥ 50% of specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 235±5, Time: 2.0±0.5 sec, Speed: 25±6 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body |
| Heat Shock | ΔC/C ≤ ±5%, DF ≤ 1.2 times specified value; Appearance without visible damage | Solder bath: 260±5, Time: 5.0±0.5 sec, Speed: 25±6 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS, Body bent 90 degrees and returned to original position |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz to 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (6 hours total) |
| Reference Standard | IEC 384-16, GB10190 | |
| Storage Environment | Temp ≤ 30, Humidity ≤ 70% (in MBB) | Guarantees 24 months storage period if MBB is not opened. Avoid high temperature and humidity. |
| Soldering Suggestion (Max) | Pre-heating: 105 (1min), Soldering: 270 (4s) |
Features
- Non-inductive construction and self-healing
- Low DF and high IR
- Very small inherent temperature rise
Applications
- Coupling, decoupling, by-passing and timing circuits
- Across-the-line, Spark killer
- Charging/discharging, lighting, noise suppression and frequency modulation
Marking
- Individual Capacitor: Rated capacitance (e.g., 104), Rated voltage (e.g., 1200VDC), Capacitance tolerance (e.g., K), Manufacturer's symbol (JIMSON (JS)).
- Package Label: Product model, rating, quantity, date of manufacture, location of manufacture, and manufacturer's name.
2410121458_Jimson-MPA105K1200D01_C434395.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
