<
>
Specifications
Capacitance:
1uF
Operating Temperature:
-40℃~+85℃
Tolerance:
±5%
Voltage Rating:
250V
Mfr. Part #:
MPP105J250D02
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MPP105J250D02
Product Description
Product Overview
The JIMSON (JS) MPP Capacitor is designed for high stability, low loss, and excellent insulation. Featuring a non-inductive and self-healing construction with a very small inherent temperature rise, these capacitors are ideal for general resonance circuits, DC pulse, high-frequency, and low-current circuits. They are particularly suited for S-shaping correction circuits in color TV sets where small size and superior performance are required. Manufactured by JIMSON ELECTRONICS (XIAMEN) CO.,LTD., these capacitors comply with RoHS 2.0 standards.
Product Attributes
- Brand: JIMSON (JS)
- Manufacturer: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Connection: Electrically welded
- Certifications: RoHS 2.0 Compliant
- Color: Brown
Technical Specifications
| Model Symbol | Capacitance | Tolerance | Rated Voltage | W (Max) | H (Max) | T (Max) | P (1.0) | D (0.05) | L (+5/-10) |
|---|---|---|---|---|---|---|---|---|---|
| 393J250D01 | 0.039uF | J (5%) | 250VDC | 13.0 mm | 9.0 mm | 6.0 mm | 10.0 mm | 0.6 mm | 25.0 mm |
| 824K125A02 | 0.82uF | K (10%) | 125VAC | 18.0 mm | 16.0 mm | 11.0 mm | 15.0 mm | 0.8 mm | 25.0 mm |
| 684K250D01 | 0.68uF | K (10%) | 250VDC | 23.0 mm | 13.0 mm | 9.0 mm | 20.0 mm | 0.8 mm | 25.0 mm |
| 105K250D01 | 1.0uF | K (10%) | 250VDC | 23.0 mm | 16.0 mm | 11.0 mm | 20.0 mm | 0.8 mm | 25.0 mm |
| 225J250D02 | 2.2uF | J (5%) | 250VDC | 23.0 mm | 19.0 mm | 11.5 mm | 20.0 mm | 0.8 mm | 25.0 mm |
| 125K250D01 | 1.2uF | K (10%) | 250VDC | 26.5 mm | 18.5 mm | 10.0 mm | 22.5 mm | 0.8 mm | 25.0 mm |
| 155K250D02 | 1.5uF | K (10%) | 250VDC | 26.5 mm | 25.0 mm | 18.0 mm | 22.5 mm | 0.8 mm | 25.0 mm |
| 824K250D01 | 0.82uF | K (10%) | 250VDC | 26.5 mm | 21.0 mm | 13.0 mm | 22.5 mm | 0.8 mm | 25.0 mm |
| 225J400D01 | 2.2uF | J (5%) | 400VDC | 31.0 mm | 21.0 mm | 12.0 mm | 27.5 mm | 0.8 mm | 25.0 mm |
| 185J125A01 | 1.8uF | J (5%) | 125VAC | 30.0 mm | 19.0 mm | 10.0 mm | 27.5 mm | 0.8 mm | 25.0 mm |
| 335K250D01 | 3.3uF | K (10%) | 250VDC | 31.0 mm | 27.0 mm | 17.0 mm | 27.5 mm | 0.8 mm | 25.0 mm |
| 395K250A01 | 3.9uF | K (10%) | 250VAC | 31.0 mm | 21.0 mm | 14.0 mm | 27.5 mm | 0.8 mm | 25.0 mm |
| 685K250D03 | 6.8uF | K (10%) | 250VDC | 34.0 mm | 30.0 mm | 20.0 mm | 31.5 mm | 0.8 mm | 4.8 mm |
General Specifications:
| Parameter | Description | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.039uF~6.8uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J=5%, K=10% | - |
| Rated Voltage | 250VDC, 250VAC, 125VAC, 400VDC | Unit: VDC (5s at 20) |
| Voltage Proof | No permanent breakdown or arcing | - |
| Dissipation Factor (DF) | 0.1% | at 20, 1KHz |
| Insulation Resistance (IR) | C0.33uF: IR30000M; C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.4%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Category | 40/85/21 | - |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | - |
Features:
- High stability of capacitance and DF versus temperature and frequency
- Low DF and high IR
- Non-inductive and self-healing
- Very small inherent temperature rise
Applications:
- General resonance circuit
- Widely used in DC pulse, high frequency and low current circuit
- Providing optimum performance with small size in S-shaping correction of colour TV set
Marking: (UV ink or laser engraving)
- On individual capacitor: Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)).
- On package: Product type, rating, quantity, date of manufacture, location of manufacture, and manufacturer's name.
Caution:
- Soldering Suggestion: Maximum Soldering Temperature 270, 4S; Pre-heating 105, 1min.
- Salt Fog Test: For tin-plated copper-coated steel leads, test after wave peak welding.
Storage Environment and Conditions:
- Storage Environment: Temperature 30, Humidity 70%. MBB (Moisture Barrier Bag) unopened ensures 24 months of storage.
- Storage Condition: Avoid exposure to atmosphere containing hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature, and high humidity. Store under the specified environment conditions.
2410121458_Jimson-MPP105J250D02_C434315.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
