<
>
Specifications
Capacitance:
1uF
Tolerance:
±10%
Voltage Rating:
250V
Mfr. Part #:
MPP105K250D01
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MPP105K250D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor is designed for high stability of capacitance and dissipation factor (DF) across varying temperatures and frequencies. It features low loss, high insulation resistance, a non-inductive construction with self-healing properties, and very small inherent temperature rise. This capacitor is suitable for general resonance circuits, DC pulse, high-frequency, and low-current circuits, as well as S-shaping correction circuits in color TV sets where small size and superior performance are required.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Product Type: Capacitor
- Category: MPP
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Color: Brown
- Reference Standards: IEC 60384-16, GB10190
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Symbol | Capacitance | Tolerance | Rated Voltage | W (MAX) | H (MAX) | T (MAX) | P (1.0) | D (0.05) | L (+5/-10) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 393J250D01 | 0.039uF | J (5%) | 250VDC | 13.0 mm | 9.0 mm | 6.0 mm | 10.0 mm | 0.6 mm | 25.0 mm | |
| 824K125A02 | 0.82uF | K (10%) | 125VAC | 18.0 mm | 16.0 mm | 11.0 mm | 15.0 mm | 0.8 mm | 25.0 mm | |
| 684K250D01 | 0.68uF | K (10%) | 250VDC | 23.0 mm | 13.0 mm | 9.0 mm | 20.0 mm | 0.8 mm | 25.0 mm | |
| 105K250D01 | 1.0uF | K (10%) | 250VDC | 23.0 mm | 16.0 mm | 11.0 mm | 20.0 mm | 0.8 mm | 25.0 mm | |
| 225J250D02 | 2.2uF | J (5%) | 250VDC | 23.0 mm | 19.0 mm | 11.5 mm | 20.0 mm | 0.8 mm | 25.0 mm | |
| 125K250D01 | 1.2uF | K (10%) | 250VDC | 26.5 mm | 18.5 mm | 10.0 mm | 22.5 mm | 0.8 mm | 25.0 mm | |
| 155K250D02 | 1.5uF | K (10%) | 250VDC | 26.5 mm | 25.0 mm | 18.0 mm | 22.5 mm | 0.8 mm | 25.0 mm | |
| 824K250D01 | 0.82uF | K (10%) | 250VDC | 26.5 mm | 21.0 mm | 13.0 mm | 22.5 mm | 0.8 mm | 25.0 mm | |
| 225J400D01 | 2.2uF | J (5%) | 400VDC | 31.0 mm | 21.0 mm | 12.0 mm | 27.5 mm | 0.8 mm | 25.0 mm | |
| 185J125A01 | 1.8uF | J (5%) | 125VAC | 30.0 mm | 19.0 mm | 10.0 mm | 27.5 mm | 0.8 mm | 25.0 mm | |
| 335K250D01 | 3.3uF | K (10%) | 250VDC | 31.0 mm | 27.0 mm | 17.0 mm | 27.5 mm | 0.8 mm | 25.0 mm | |
| 395K250A01 | 3.9uF | K (10%) | 250VAC | 31.0 mm | 21.0 mm | 14.0 mm | 27.5 mm | 0.8 mm | 25.0 mm | |
| 685K250D03 | 6.8uF | K (10%) | 250VDC | 34.0 mm | 30.0 mm | 20.0 mm | 31.5 mm | 0.8 mm | 4.8 mm | |
| 105J250D02 | 1.0uF | J (5%) | 250VDC | 23.0 mm | 17.0 mm | 9.5 mm | 20.0 mm | 0.8 mm | 3.8 mm | |
| 105J250A02 | 1.0uF | J (5%) | 250VAC | 23.0 mm | 17.0 mm | 9.5 mm | 20.0 mm | 0.8 mm | 3.8 mm | |
| General Specifications: | ||||||||||
| Capacitance Tolerance | J=5%, K=10% | |||||||||
| Rated Voltage | 250VDC, 250VAC | |||||||||
| Voltage Proof | No permanent breakdown or arcing | |||||||||
| Dissipation Factor (DF) | 0.1% (at 20, 1kHz) | |||||||||
| Insulation Resistance (IR) | C0.33uF: IR30000M; C0.33uF: IR*C5000S (measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%) | |||||||||
| Endurance | C/C5%; DF0.4%; IR50% of specified value. (1000 hours with 125% of rated voltage at 85) | |||||||||
| Climatic Catalogue | 40/85/21 | |||||||||
| Solderability | Solder should cover at least 75% of the circumference of the lead (solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body) | |||||||||
| Heat Shock | C/C5%, DF1.2*specified value. (solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body) | |||||||||
| Lead Tensile Strength | Pull: 2.2 LBS, Time: 5 sec | |||||||||
| Lead Bending Strength | Load: 1.1 LBS (body bent 90 degrees and returned to original position) | |||||||||
| Vibration | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |||||||||
Important Terminology
- Rated Capacitance: Expressed by a three-digit number (e.g., 224 = 0.22uF, 225 = 2.2uF). Unit: PF.
- Capacitance Tolerance: Percentage deviation of actual capacitance from rated capacitance (F=1%, G=2%, J=5%, K=10%, M=20%, N=30%).
- Dissipation Factor (DF): Measure of power loss in a capacitor under AC voltage (tg = P/Q). Standard measurement at 20 and 1kHz.
- Insulation Resistance (IR): Ratio of applied DC voltage to leakage current after 1 minute of charging. Measured at 20, RH65%. For larger capacitors, described by time constant (IR * C).
- Self-healing: Ability of metallized film capacitors to isolate a breakdown point by evaporating the thin metal layer around it, preventing permanent short circuits.
Storage and Handling
- Storage Environment: Temperature 30, Humidity 70%. Unopened MBB ensures 24 months of storage.
- Storage Conditions: Avoid exposure to atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid) and high temperature/humidity. Store in air under specified conditions to maintain lead solderability.
- Soldering Suggestion: Maximum Soldering Temperature: 270 for 4S, with 1min pre-heating at 105.
- Salt Fog Test: For tin-plated copper-coated steel leads, perform salt mist testing after wave peak welding.
2410121458_Jimson-MPP105K250D01_C434366.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
