<
>
Specifications
Capacitance:
47nF
Ratings:
X2
Voltage(AC):
310V
Tolerance:
±10%
Mfr. Part #:
MKP473K310A02
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MKP473K310A02
Product Description
Product Overview
The JIMSON MKP X2 capacitor is designed for a wide range of applications, offering high stability, excellent current handling, and long-term reliability. It features a polypropylene film dielectric and vacuum-evaporated metal electrodes, encapsulated in a flame-retardant plastic case. This capacitor is suitable for line-by-pass, antenna coupling, across-the-line applications, and in switching power supplies, providing effective electromagnetic interference suppression.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Encapsulation: Reinforced flame retardant plastic case, sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Certifications: UL, VDE, ENEC, CQC, CB, KC
- RoHS Compliance: Yes (RoHS 2.0)
Technical Specifications
| Parameter | Description | Value | Test Conditions |
| Capacitance | Rated Capacitance | 0.022uF~4.7uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | K=10% | ||
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | ||
| Voltage | Rated voltage | 310VAC | |
| Voltage proof | 4.3*UR VDC (1 minute at 20) | No permanent breakdown or arcing | |
| Dissipation factor (tangent of loss) | DF0.1% | (at 20, 1KHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |
| Insulation resistance | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| C0.33uF | IR*C5000S | ||
| Endurance | C/C10%; DF0.8% (C1uF) | 1000 hours with 125% of rated voltage at 85. | |
| DF0.5%; (C>1uF) | |||
| IR 50% of the specified value | |||
| Climatic catalogue | 40/100/21 | ||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| 75% | |||
| Heat shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead tensile strength | Pull2.2 LBS | Time: 5 sec | |
| Lead bending strength | Load of lead1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each directions with a total of 6 hours | ||
| Reference standard | IEC 60384-14, UL60384-14 | ||
| Model Description | TYPE | MKP | |
| Model Description | CAPACITANCE | Three digits: first two are significant digits, third is exponent (in pF) | Example: 104 = 10 x 10^4 pF = 0.1uF |
| Model Description | CAPACITANCE TOLERANCE SYMBOL | B, C, D, F, G, H, I, J, K, M, N, V, Z | Corresponds to 0.1% to 30% and others |
| Model Description | RATED VOLTAGE SYMBOL | A, B, C, D, E, F, G, H, J, K | Corresponds to 50V to 8000V |
| Model Description | PITCH | 5.0, 7.5, 10.0, 15.0, 17.5, 20.0, 22.5, 27.5, Others | |
| Model Description | LEAD TYPE | R, F, C, B, O | Rigid, Flexible, Cut, Crimped, Others |
| Dimensions | CAP | W 0.5 | Unit: mm |
| Dimensions | CAP | H 0.5 | Unit: mm |
| Dimensions | CAP | T 0.5 | Unit: mm |
| Dimensions | CAP | P 1.0 | Unit: mm |
| Dimensions | CAP | D 0.05 | Unit: mm |
| Dimensions | CAP | L +5/-10 | Unit: mm |
| Example Dimensions | 223K310A02 | 0.022uF, Yellow | W:13.0, H:11.0, T:5.0, P:10.0, D:0.6, L:25.0 |
| Example Dimensions | 473K310A02 | 0.047uF, Yellow | W:18.0, H:12.0, T:6.0, P:15.0, D:0.6, L:25.0 |
| Example Dimensions | 104K310A02 | 0.1uF, Yellow | W:18.0, H:12.0, T:6.0, P:15.0, D:0.8, L:25.0 |
| Example Dimensions | 154K310A01 | 0.15uF, Yellow | W:18.0, H:18.0, T:10.0, P:15.0, D:0.8, L:25.0 |
| Example Dimensions | 334K310A01 | 0.33uF, Yellow | W:18.0, H:16.0, T:10.0, P:15.0, D:0.8, L:25.0 |
| Example Dimensions | 474K310A04 | 0.47uF, Yellow | W:26.5, H:18.5, T:10.0, P:22.5, D:0.8, L:25.0 |
| Example Dimensions | 684K310A01 | 0.68uF, Yellow | W:26.5, H:22.0, T:12.0, P:22.5, D:0.8, L:25.0 |
| Example Dimensions | 105K310A01 | 1.0uF, Yellow | W:26.5, H:22.0, T:12.0, P:22.5, D:0.8, L:30.0 |
| Example Dimensions | 335K310A01 | 3.3uF, Yellow | W:32.0, H:28.0, T:18.0, P:27.5, D:0.8, L:25.0 |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | Pre-heating: 105 1min, Soldering: 4S |
| Storage | Environment | 30, 70% RH (unopened MBB for 24 months) | Avoid air with corrosive substances, high temperature, and high humidity. |
2410121459_Jimson-MKP473K310A02_C434161.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
