<
>
Specifications
Capacitance:
330nF
Ratings:
X2
Voltage(AC):
275V
Tolerance:
±10%
Mfr. Part #:
MKP334K275A12
Package:
Through Hole,P=22.5mm
Key Attributes
Model Number:
MKP334K275A12
Product Description
JIMSON MKP X2 Capacitor
This document outlines the specifications for the JIMSON MKP X2 capacitor, model MKP334K275A12. Designed for various electronic applications, this capacitor offers high stability across wide temperature and frequency ranges, excellent current handling, and long-term operational stability. It is suitable for line-by-pass, antenna coupling, across-the-line applications, FMI filters, and switching power supplies. The capacitor features a polypropylene film dielectric, vacuum-evaporated metal electrodes, and is encapsulated in a flame-retardant plastic case. It meets RoHS compliance.
Product Attributes
- Brand: JIMSON
- Origin: Xiamen, China
- Product Name: Capacitor
- Type: MKP X2
- Model: MKP334K275A12
- Material: Polypropylene film dielectric, vacuum evaporated metal electrodes, flame retardant plastic case
- Color: Yellow (body)
- Certifications: UL, VDE, ENEC, CQC, CB, KC
Technical Specifications
| Description | Value | Test Conditions | ||||
|---|---|---|---|---|---|---|
| Capacitance | ||||||
| Rated Capacitance | 0.33uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. | ||||
| Capacitance Tolerance | K=10% | |||||
| Voltage | ||||||
| Rated Voltage | 275VAC | |||||
| Voltage Proof | 1800VDC (1 minute at 20) | No permanent breakdown or flashover | ||||
| Dissipation Factor (tangent of loss) | DF0.1% | (at 20, 1KHz) Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. | ||||
| Insulation Resistance | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||||
| IR15000M (for C0.33uF) | ||||||
| IR*C5000S (for C >0.33uF) | ||||||
| Endurance | C/C10%; DF0.8% (C1uF); DF0.5% (C>1uF); IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. | ||||
| Climatic Catalogue | 40/100/21 | |||||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Heat shock | C/C5%, DF1.2*specified value. Capacitor appearance should be free from visible damage after test. | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Lead tensile strength | No visible damage to appearance | Pull: 2.2 LBS; Time: 5 sec | ||||
| Lead bending strength | No visible damage to appearance | Load of lead: 1.1 LBS; The body of capacitor is bent 90 degrees and returned to its original position | ||||
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction with a total of 6 hours | ||||
| Reference standard | IEC 60384-14, UL60384 | |||||
| Construction | ||||||
| Dielectric | Polypropylene film | |||||
| Electrodes | Vacuum evaporated metal | |||||
| Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin meeting the requirement of UL94V-0 | |||||
| Leads | Radial leads of tinned wire/insulation flexible wire | |||||
| Terminal contact | Electrically welded | |||||
| Marking | Manufacturer: JIMSON; Type: MKP; Rated capacitance; Tolerance; Rated voltage; Climatic catalogue; Sub-class (X2); Safety approvals; Reference standard (IEC384-14) | UV ink or laser engraving | ||||
| Dimensions | Unit: mm | |||||
| Model | W 0.5 | H 0.5 | T 0.5 | P 1.0 | D 0.05 | L 5.0 |
| MKP334K275A12 | 26.5 | 17.0 | 8.5 | 22.5 | 0.8 | 21.0 |
2509180925_Jimson-MKP334K275A12_C2848137.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
