<
>
Specifications
Capacitance:
560nF
Operating Temperature:
-40℃~+85℃
Tolerance:
±10%
Voltage Rating:
630V
Mfr. Part #:
MPP564K630D01
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MPP564K630D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor is a high-stability, low-loss, and self-healing capacitor designed for general resonance circuits, DC pulse, high-frequency, and low-current applications. It is particularly suitable for S-shaping correction circuits in color TV sets, offering excellent performance with a small size. Key features include high stability of capacitance and dissipation factor versus temperature and frequency, low dissipation factor, high insulation resistance, non-inductive design, and very small inherent temperature rise.
Product Attributes
- Brand: JIMSON (JS)
- Manufacturer: / JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Product Type: Capacitor
- Category: MPP
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Color: Brown
- Compliance: RoHS 2.0 Standard
Technical Specifications
| Specification | Description / Value | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.0022uF ~ 1.0uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 630VDC, 63VDC | |
| Voltage Proof | No permanent breakdown or arcing | 1.6*UR Unit:VDC (5s at 20) |
| Dissipation Factor (tan) | DF0.1% | at 20, 1KHz, Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C0.33uF: IR30000M C0.33uF: IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.4%; IR50% of specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS, Body bent 90 degrees and returned to original position |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | |
| Model Example | 222J630D01 | 0.0022uF |
| Model Example | 103J630D01 | 0.01uF |
| Model Example | 223J630D01 | 0.022uF |
| Model Example | 273J630D01 | 0.027uF |
| Model Example | 104K630D02 | 0.1uF |
| Model Example | 104K630D03 | 0.1uF |
| Model Example | 224J630VDC | 0.22uF |
| Model Example | 105K630D04 | 1.0uF |
| Model Example | 334K630D01 | 0.33uF |
| Model Example | 564K630D01 | 0.56uF |
| Model Example | 684K630D05 | 0.68uF |
| Model Example | 474J630D06 | 0.47uF |
| Model Example | 105J063D01 | 1.0uF |
| Model Example | 472J630D02 | 0.0047uF |
| Dimensions (W x H x T) | Varies by model (e.g., 13.0 x 8.0 x 5.0 mm for 0.0022uF) | See Page 7 & 8 for detailed dimensions per model |
| Lead Pitch (P) | Varies by model (e.g., 10.0 mm for 0.0022uF) | See Page 7 & 8 for detailed dimensions per model |
| Lead Diameter (D) | Varies by model (e.g., 0.6 mm for 0.0022uF) | See Page 7 & 8 for detailed dimensions per model |
| Lead Length (L) | Varies by model (e.g., 25.0 mm for 0.0022uF) | See Page 7 & 8 for detailed dimensions per model |
| Soldering Suggestion (Max Temp/Time) | Pre-heating: 105 1min, Soldering: 270 4s | |
| Storage Environment | Temperature 30, Humidity 70% | MBB (Moisture Barrier Bag) not open: 24 months storage period |
| Storage Condition Notes | Avoid atmospheric contaminants (HCl, H2S, H2SO4), high temperature, and high humidity. |
2304140030_Jimson-MPP564K630D01_C434318.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
