Product Overview
The JIMSON MPC Series Capacitors are non-inductive, self-healing capacitors designed for a wide range of electronic applications. Featuring a polypropylene film dielectric and vacuum-evaporated metal electrodes, these capacitors offer high moisture resistance and excellent physical and environmental characteristics. They are ideal for filtering and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in general communication equipment. Encapsulated in a reinforced flame-retardant plastic case and sealed with epoxy resin (UL94V-0 compliant), they are built for reliability and durability.
Product Attributes
- Brand: JIMSON
- Manufacturer: () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Product Type: Capacitor
- Series: MPC
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Encapsulation: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0 compliant)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Connection: Electrically welded (arc spot welding)
- Construction: Non-inductive
- Certifications: RoHS Compliant (RoHS 2.0)
- Color: Yellow (as per dimension table)
Technical Specifications
| Specification | Value | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.0022uF ~ 0.47uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J=5%, K=10% | - |
| Rated Voltage | 630VDC, 630VAC | - |
| Voltage Proof | 1.6*UR (Unit: VDC) | 1 minute at 20, no permanent breakdown or arcing |
| Dissipation Factor (DF) | 0.1% | at 20, 1kHz, 1Vrms max. |
| Insulation Resistance (IR) | C0.33uF: IR30000M C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | - |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C5%, DF1.2*specified value. Capacitor appearance should be free from visible damage after the test. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage to leads. | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage to leads. | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | No visible damage to appearance. | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 | - |
Dimensions (Unit: mm)
| Model | Capacitance | W 0.5 | H 0.5 | T 0.5 | P 1.0 | D 0.05 | L +5/-10 |
|---|---|---|---|---|---|---|---|
| 272K630D01 | 0.0027uF | 13.0 | 9.0 | 4.0 | 10.0 | 0.6 | 25.0 |
| 472J630D01 | 0.0047uF | 13.0 | 11.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 682K630D01 | 0.0068uF | 13.0 | 11.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 273J630D02 | 0.027uF | 18.0 | 10.0 | 5.0 | 15.0 | 0.8 | 25.0 |
| 154J630D01 | 0.15uF | 18.0 | 14.5 | 8.5 | 15.0 | 0.8 | 25.0 |
| 104K630D02 | 0.1uF | 18.0 | 12.0 | 6.0 | 15.0 | 0.6 | 25.0 |
| 123J630D01 | 0.012uF | 26.5 | 18.5 | 10.0 | 22.5 | 0.8 | 25.0 |
| 224K630D02 | 0.22uF | 26.5 | 16.0 | 17.0 | 22.5 | 0.8 | 25.0 |
| 474K630A02 | 0.47uF | 26.5 | 17.0 | 8.5 | 22.5 | 0.8 | 25.0 |
| 474K630VAC | 0.47uF | 26.5 | 18.5 | 10.0 | 22.5 | 0.8 | 25.0 |
| 564K630VAC | 0.56uF | 26.5 | 17.0 | 10.0 | 22.5 | 0.8 | 25.0 |
Marking
Individual Capacitor Marking: Rated capacitance (e.g., 272), Rated voltage (e.g., 630VDC), Capacitance tolerance (e.g., K), Manufacturer's symbol (JIMSON (JS)). Marking method: UV ink or laser engraving.
Package Marking: Product model, rated capacitance and voltage, production date and factory address, manufacturer's name.
Storage Environment and Conditions
- Storage Environment: Temperature 30, Humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures 24 months of storage.
- Storage Conditions: Store in air, away from hydrogen chloride, hydrogen sulfide, and sulfuric acid. Avoid high temperature and high humidity.
Soldering Suggestion
- Pre-heating: 105, 1 min
- Soldering: 270, 4 sec
Caution
- The lead wire is tin-plated copper-coated steel. Please test the salt mist after wave peak welding.
2410121646_Jimson-MPC474K630A02_C434323.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
