<
>
Specifications
Power(Watts):
1W
Resistance:
30mΩ
Type:
Current Sense Resistor;Alloy Resistor
Tolerance:
±1%
Mfr. Part #:
RE1206F1R030
Package:
1206
Key Attributes
Model Number:
RE1206F1R030
Product Description
Alloy Resistor - Patch Resistor
High-power current sense resistors designed for accurate current detection. Featuring SMD patch mounting, high power handling, and ultra-low resistance values down to 0.0R, these resistors offer excellent temperature coefficient characteristics and parasitic inductance.
Product Attributes
- Brand: RE (implied by part number)
- Certifications: RoHS, REACH, AEC-Q200
Technical Specifications
| Size | Type | Max Rated Power (W) | Resistance Tolerance | Resistance Range (m) | TCR (ppm/) | Operating Temp. Range | Insulation Resistance |
| 1206 Small Electrode | Patch Resistor | 1W | F:1%, G:2%, J:5% | R000~R100 | 3m: 350ppm/ 3mR100m: 50ppm/ | -55~+170 | 100M |
| Size | Type | Length L (mm) | Width W (mm) | Thickness T (mm) | Electrode Width E (mm) |
| 1206 Large Electrode | Patch Resistor | 3.20.2 | 3.20.2 | 0.70.2 (RR006) 0.550.2 (R>R006) | 0.60.2 |
| Item | Test Method | Conditions | Specification |
| Short Time Overload | IEC60115-1 4.13 | Applied 5.0 times of rated power for 5 seconds. | R% 1% |
| Temperature Coefficient | IEC60115-1 4.8 | Refer to characteristic specification. | Refer to Spec. |
| Temperature Cycling | JESD22 Method JA-104 | 1000 Cycles (-55 to +125) | R% 1% |
| High Temperature Exposure | MIL-STD-202 Method 108 | 1000 hrs. @T=125 | R% 1% |
| Low Temperature Operation | IEC60115-1 4.23.4 | 45 min. @T=-55 | R% 1% |
| High Temp./Humidity Biased | MIL-STD-202 METHOD 103 | 1000 hours 85/85%RH (10% operating power) | R% 1% |
| Solderability | J-STD-002B test B | Dip in flux, then solder bath at 245 5 for 2~3 sec. | Min 95% coverage |
| Operational Life | MIL-STD-202 METHOD 108 | 702, rated current (1.5H on, 0.5H off) for 1000 hours. | R% 1% |
| Resistance to Vibration | MIL-STD-202 METHOD 204 | 5g's for 20min, 12 cycles, 10-2000Hz. | R% 1% |
| Resistance to Solder Heat | IEC60115-1 4.18 | Dip in flux, then solder bath at 260 5 for 101 sec. | R% 1% |
| Terminal Bending | AEC-Q200-005 | Min 2mm deflection, 60 sec. | R% 1% |
| Mechanical Shock | MIL-STD-202 METHOD 213 | 100g's, 6ms, half sine shock pulse. | R% 1% |
| Terminal Strength | AEC-Q200-006 | Applied 17.7N (1.8Kg) for 601 seconds. | R% 1% |
| Thermal Shock | MIL-STD-202 METHOD 107 | -55/+125, 300 cycles, 20 sec max transfer time, 15 min dwell. | R% 1% |
| Flammability | UL-94 | V-0 or V-1 acceptable. | Electrical test not required. |
| ESD Test | AEC-Q200-002 | 2KV, 2 times/1s | R% 1% |
2508221508_JIERR-RE1206F1R030_C46961739.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
