<
>
Specifications
Capacitance:
470nF
Ratings:
X2
Voltage(AC):
275V
Tolerance:
±10%
Mfr. Part #:
MKP474K275A05
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MKP474K275A05
Product Description
Product Overview
The JIMSON MKP474K275A05 is a high-stability MKP capacitor designed for a wide range of applications including line-by-pass, antenna coupling, across-the-line filtering, FMI filters, and switching power supplies. It offers high transient endurance, high dielectric strength, and long-term stability, making it suitable for demanding environments.
Product Attributes
- Brand: JIMSON
- Manufacturer: () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: Xiamen, China
- Product Type: Capacitor (MKP)
- Material: Polypropylene film dielectric, vacuum evaporated metal electrodes, reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0).
- Leads: Radial leads of tinned wire/insulation flexible wire.
- Color: Yellow (Body)
- Certifications: UL, VDE, ENEC, CQC, CB, KC.
- RoHS Compliance: Compliant with RoHS 2.0.
Technical Specifications
| Specification | Description | Value | Test Conditions |
| Capacitance | Rated Capacitance | 0.47uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | K=10% | ||
| Voltage | Rated voltage | 275VAC | |
| Voltage Proof | 4.3*UR Unit:VDC (1 minute at 20) | No permanent breakdown or flashover | |
| Dissipation Factor | DF0.1% | (at 20,1KHz) | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Insulation Resistance | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance | C0.33uF | IR*C5000S | |
| Endurance | C/C10%, DF0.8% (C1uF) | DF0.5%;(C>1uF) | 1000 hours with 125% of rated voltage at 85. |
| Endurance | IR 50% of the specified value | ||
| Climatic Catalogue | 40/100/21 (Meets 40/110/56 environment) | ||
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec | |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |
| Reference Standard | IEC 60384-14, UL60384 | ||
| Construction | Dielectric | Polypropylene film | |
| Construction | Electrodes | Vacuum evaporated metal | |
| Construction | Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0) | |
| Construction | Leads | Radial leads of tinned wire/insulation flexible wire | |
| Construction | Terminal contact | Electrically welded | |
| Outline Drawing | Dimension (mm) | W: 18.0, H: 18.0, T: 10.0, P: 15.0, D: 0.8, L: 21.0 | |
| Storage Conditions | Storage Environment | Temperature 30, Humidity 70% (in MBB) | Guarantees 24 months shelf life if MBB is unopened. Avoid high temperature, high humidity, and corrosive atmosphere. |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | Pre-heating: 105 1min, Soldering: 4S |
2509180925_Jimson-MKP474K275A05_C2848136.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
