<
>
Specifications
Capacitance:
220nF
Ratings:
X2
Voltage(AC):
275V
Tolerance:
±10%
Mfr. Part #:
MKP224K275VAC(X2-224K)-B
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MKP224K275VAC(X2-224K)-B
Product Description
JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
Product Name: Capacitor
Type: MKP X2
Description: 0.22uF K 275VAC
Date: 2022-10-10
Product Overview
The JIMSON MKP X2 capacitor is designed for a wide range of applications requiring high stability and reliability. It features high current handling, high dielectric strength, long-term stability, and the ability to withstand over-voltage stressing. Applications include line-by-pass, antenna coupling, across-the-line, spark killer, FMI filters, and switching power supplies.
Product Attributes
- Manufacturer: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Material: Polypropylene film dielectric, vacuum evaporated metal electrodes, reinforced flame retardant plastic case (UL94V-0)
- Lead Type: Radial leads of tinned wire/insulation flexible wire
- Color: Yellow (for 224K275VAC model)
- Certifications: UL, VDE, ENEC, CQC, CB, KC
Technical Specifications
| Parameter | Description | Value | Test Conditions |
|---|---|---|---|
| Rated Capacitance | Nominal Value | 0.22uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | K=10% | ||
| Rated Voltage | 275VAC | ||
| Voltage Proof | 4.3*UR Unit:VDC (1 minute at 20) | No permanent breakdown or arcing | |
| Dissipation Factor (tangent of loss) | DF0.1% | (at 20, 1KHz) | |
| Insulation Resistance | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance | C0.33uF | IR*C5000S | |
| Endurance | C/C10%, DF0.8% (C1uF); DF0.5%;(C>1uF); IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85 | |
| Climatic Catalogue | 40/100/21 (Meets 40/110/56 environment) | ||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat shock | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead tensile strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec | |
| Lead bending strength | No visible damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |
| Reference Standard | IEC 60384-14, UL60384 | ||
| Dielectric | Polypropylene film | ||
| Electrodes | Vacuum evaporated metal | ||
| Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin meeting UL94V-0 | ||
| Leads | Radial leads of tinned wire/insulation flexible wire | ||
| Terminal contact | Electrically welded | ||
| Outline Drawing (224K275VAC) | Dimensions (mm) | W: 18.0 0.5, H: 12.0 0.5, T: 6.0 0.5, P: 15.0 1.0, D: 0.8 0.05, L: 25.0 5.0 |
2601051502_Jimson-MKP224K275VAC-X2-224K-B_C2848140.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
