<
>
Specifications
Mfr. Part #:
GPX474KA5Z2408BF1
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
GPX474KA5Z2408BF1
Product Description
Product Overview
The CBB62 X2 CAPACITOR is a 0.47FK330VAC film capacitor designed for various applications. It utilizes a polypropylene zinc-aluminum evaporated film with gold wire spraying and tin-zinc alloy material for its construction. The capacitor features a PBT engineering plastic case and flame-retardant epoxy potting for durability and safety.
Product Attributes
- Product Name: CBB62 X2 CAPACITOR
- Product Type: 0.47FK330VAC
- Brand: ZHEJIANG SAINING ELECTRONIC TRADE LIMITED COMPANY
- Origin: China
- Certifications: CUS E251337
- Main Raw Materials: Polypropylene zinc-aluminum evaporated film, Gold wire spraying, Tin-zinc alloy material, Tinned copper-clad steel wire (CP wire), PBT engineering plastic, Flame-retardant epoxy potting material
Technical Specifications
| Item | Specification | Finished Size (mm) | W | H | T | P | L | D |
| Type | CBB62 X2 | 0.47FK330VAC | 18 | 14.5 | 8.5 | 15 | 8 | 0.8 |
| Item | Specification | Value/Requirement |
| Capacitance Range | Capacitance range | 0.001-2.2F |
| Capacitance Tolerance | Capacitance tolerance | J(5%), K(10%) |
| Dissipation Factor | Dissipation Factor | 0.1% at 10KHz and 25 |
| Insulation Resistance | Insulation resistance | C0.33F 32000M; C > 0.33F 15000M |
| Rated Voltage | Rated voltage | 330VAC |
| Test Voltage | Test voltage | 1500VDC |
| Operating Temperature | Minimum limit temperature | -40 |
| Operating Temperature | Maximum limit temperature | +100 |
| Welding Standard | Temperature | 2605 |
| Welding Standard | Time | 50.5S |
| Item | Test Conditions | Standard Requirements |
| High Temperature Aging | Temperature 805, Time 30 hours, Voltage 330VAC | C2NF, tg1010 -4 |
| Short Circuit Discharge | 1KVDC, Forward and reverse short circuit discharge 5 times | C/C2%, tg2010 -4 |
| Charge and Discharge Test | 1KVDC, Charge and discharge 10000 times | C/C2%, tg1010 -4 |
| Mark Solvent Resistance | Trichloroethylene immersion for 10 minutes | Epoxy no leakage, mark clear |
| Weld Heat Resistance | Immersion pins in 2605 solder bath, 1.5mm2mm from body, 10 s1 s, then static for 1h2h | C/C5%, tg2010 -4 |
| Humidity Test | Temperature 402, Humidity 93%, Time 21d | C/C5% |
| Endurance Test | Temperature 855, Voltage 1.25VR, Time 1000 hours | C/C5% ,tg3010 4 |
| High Temperature and High Humidity Test | Temperature 852, Humidity 85%3%, 110V, 1000h | C/C10% |
| Pin Tensile Strength | Apply 10N tensile force to pins | No visible damage |
2306081101_jiangbeizhenhua-GPX474KA5Z2408BF1_C7424549.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
