<
>
Specifications
Voltage Rating:
1.5kV
Capacitance:
22nF
Temperature Coefficient:
X7R
Mfr. Part #:
C1210X223K152TGF
Package:
1210
Key Attributes
Model Number:
C1210X223K152TGF
Product Description
Product Overview
Multilayer Ceramic Chip Capacitors (MLCC) for electric equipment with voltages ranging from 1.5KV to 5KV. These MLCCs support Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. The product is compliant with RoHS & HF.
Product Attributes
- Brand: IHHEC (a trademark of Holy Stone Enterprise Co., Ltd)
- Certifications: RoHS & HF
Technical Specifications
| Item | Specification | Test Condition |
| Visual | No abnormal exterior appearance | Visual inspection |
| Dimension | See Page 2 | Visual inspection |
| Insulation Resistance | 10,000Mmin. | V500V, Applied 500Vdc Charge Time60sec. Is applied less than 50mA current. |
| Capacitance | Class Within The Specified Tolerance | |
| D.F. | Class Char. Maximum X7R: 2.5% max. | |
| Withstanding Voltage | No dielectric breakdown or mechanical breakdown | 1000V :120% Rated Voltage Voltage ramp up rate500v/sec for 1~5 sec. charge/discharge Current is less than 50mA. Withstanding voltage testing requires immersion of the element in a isolation fluid prevent arcing on the chip surface, at voltage over 1000Vdc. |
| Temperature Capacitance Coefficient | Class Char. Temp. Range Cap. Change(%) Class : (C2-C1)/C1 100% C1:Capacitance at standard temperature(25) C2: Capacitance at test temperature (T2) X7R -55 ~+125 15% | |
| Adhesive Strength of Termination | No indication of peeling shall occur on the terminal electrode. Pull force shall be applied for 10 1 second. | 0603----5N( 0.5 Kgf) 0603----10N(1.0 Kgf) |
| Resistance to Flexure of Substrate | Appear-ance No mechanical damage shall occur. Bending shall be applied to the 1.0 mm with 1.0 mm/sec. The duration of the applied forces shall be 5 1sec | C-Meter Capacitance Change Char. Cap. Change X7R 12.5% Class Frequency Voltage X7R 1KHz10% 1.00.2Vrms |
| Solderability | More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve . | Solder Temperature : 245 5 Dip Time : 5 0.5 sec. Immersing Speed : 2510% mm/s Solder : Lead Free Solder Flux :Rosin Preheat : At 80~120 for 10~30sec. |
| Resistance To Soldering Heat | Appear-ance No mechanical damage shall occur. Class capacitor shall be set for 484 hours at room temperature after one hour heat treatment at 150 +0/-10 before initial measure. | Preheat : At 150 10 For 60~120sec. Dip : Solder Temperature of 260 5 Dip Time : 10 1sec. Immersing Speed : 2510% mm/s Flux :Rosin Measure at room temperature after cooling for Class: 48 4 Hours |
| Capacitance Change (Resistance to Soldering Heat) | Class X7R Within 10% | |
| D.F. (Resistance to Soldering Heat) | Class To satisfy the specified initial value | |
| Insulation Resistance (Resistance to Soldering Heat) | To satisfy the specified initial value | |
| Withstand Voltage (Resistance to Soldering Heat) | To satisfy the specified initial value | |
| Temperature Cycle | Appear-ance No mechanical damage shall occur Class capacitor shall be set for 48 4 hours at room temperature after one hour heat treatment at 150 +0/-10 before initial measure. Capacitor shall be subjected to five cycles of the temperature cycle as following: Measure at room temperature after cooling for Class :48 4Hrs Solder the capacitor on P.C. board shown in Fig 2. before testing. | Step Temp.() Time(min) 1 Min Rated Temp. +0/-3 30 2 25 3 3 Max Rated Temp. +3/-0 30 4 25 3 |
| Capacitance Change (Temperature Cycle) | Class X7R Within 7.5% | |
| D.F. (Temperature Cycle) | Class To satisfy the specified initial value | |
| Insulation Resistance (Temperature Cycle) | To satisfy the specified initial value | |
| Humidity | Appear-ance No mechanical damage shall occur Class capacitor shall be set for 48 4 hours at room temperature after one hour heat treatment at 150+0/-10 before initial measure. Solder the capacitor on P.C. board shown in Fig 2. before testing. Measure at room temperature after cooling for Class :48 4Hrs | Temperature : 40 2 Relative Humidity : 90 ~ 95%RH Test Time : 500 +12/-0Hr |
| Capacitance Change (Humidity) | Class X7R Within 15% | |
| D.F. (Humidity) | Class Char. Maximum X7R: 5.0% max. | |
| Insulation Resistance (Humidity) | 1,000Mmin. | |
| High Temperature Load | Appear-ance No mechanical damage shall occur Class capacitors applied DC voltage (following table) is applied for one hour at maximum operation temperature 3 then shall be set for 484 hours at room temperature and the initial measurement shall be conducted. Voltage Conditioning : 100% Rated Voltage meet MIL-PRF-49467(Group A/B) Current Applied : 50 mA Max. Measure at room temperature after cooling for Class: 48 4 Hours | |
| Capacitance Change (High Temperature Load) | Class X7R Within 15% | |
| D.F. (High Temperature Load) | Class Char. maximum X7R: 5.0% max. | |
| Insulation Resistance (High Temperature Load) | 1,000Mmin. | |
| Vibration | Appear-ance No mechanical damage shall occur Solder the capacitor on P.C. Board shown in Fig 2. before testing. Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3perpendicular directions. | |
| Capacitance Change (Vibration) | Class X7R Within 7.5% | |
| D.F. (Vibration) | Class To satisfy the specified initial value | |
| Insulation Resistance (Vibration) | To satisfy the specified initial value | |
| Dimensions (1210) | L: 3.20 0.30mm, W: 2.50 0.20mm, T: 2.40 0.20mm, B (min): 1.60mm, BW (min): 0.30mm | |
| Packing (Tape & Reel) | 1210 T1.25mm: 3,000 pcs/Reel (Plastic Tape) | |
| Cover Tape Reel Off Force | 5 gf Peel-Off Force 70 gf |
2410121653_IHHEC-C1210X223K152TGF_C2991912.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
