<
>
Specifications
Voltage Rating:
10V
Capacitance:
470nF
Temperature Coefficient:
Y5V
Tolerance:
±20%
Mfr. Part #:
C0402Y474M010T
Package:
0402
Key Attributes
Model Number:
C0402Y474M010T
Product Description
Product Overview
Multilayer Ceramic Chip Capacitors (MLCC) designed for electric equipment with a voltage range of 4V to 50V. These capacitors are suitable for general electric circuits, telecommunications, personal computers and peripherals, power circuits, and mobile applications. This product is RoHS compliant.
Product Attributes
- Brand: NCC
- Certifications: RoHS compliant
Technical Specifications
| Part Number Code | Product Code | Chip Size Code (mm) | Temperature Characteristics Code | Temperature Characteristics | Temperature Range | Temperature Coefficient | Capacitance Unit | Nominal Capacitance (pF) | Capacitance Tolerance Code | Capacitance Tolerance | Rated Voltage Code | Rated Voltage (Vdc) | Tapping Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C 1812 N 473 J 050 T | C | 1812 (4.603.20) | N | NPO | -55~+125 | 30 ppm/ | pF | 473 (47,000.0) | J | 5.00 % | 050 | 50 | T |
| Chip Size Code | Length (mm) | Width (mm) | T (max) (mm) | B (min) (mm) | BW (min) (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.300.03 | 0.33 | 0.20 | 0.10 |
| 0402 | 1.000.05 | 0.500.05 | 0.55 | 0.30 | 0.15 |
| 0603 | 1.600.10 | 0.800.10 | 0.90 | 0.40 | 0.15 |
| 0805 | 2.000.20 | 1.250.20 | 1.45 | 0.70 | 0.20 |
| 1206 | 3.200.30 | 1.600.20 | 1.80 | 1.50 | 0.30 |
| 1210 | 3.200.30 | 2.500.20 | 2.60 | 1.60 | 0.30 |
| 1808 | 4.600.30 | 2.000.20 | 2.20 | 2.50 | 0.30 |
| 1812 | 4.600.30 | 3.200.30 | 3.00 | 2.50 | 0.30 |
| 1825 | 4.600.30 | 6.350.40 | 2.60 | 2.50 | 0.30 |
| 2208 | 5.700.40 | 2.000.20 | 2.20 | 3.50 | 0.30 |
| 2211 | 5.700.40 | 2.800.40 | 3.00 | 3.50 | 0.30 |
| 2220 | 5.700.40 | 5.000.40 | 3.00 | 3.50 | 0.30 |
| 2225 | 5.700.40 | 6.350.40 | 3.00 | 3.50 | 0.30 |
| Item | Specification | Test Condition |
|---|---|---|
| Visual | No abnormal exterior appearance | Visual Inspection |
| Dimension | See Page 4 | Visual Inspection |
| Insulation Resistance | 10,000M or 500/C whichever is smaller for rated voltage>10V and greater 100/C for rated voltage10V. | Applied Voltage: Rated Voltage Charge Time : 605 sec. Charge-Discharge current shall be less than 50mA current. |
| Capacitance | Class C100pF 1MHz10%; C100pF 1KHz10% Class C10uF 1KHz10%; C10uF 120Hz20% | 1.00.2Vrms (except for C10uF Class which is 0.50.2Vrms) |
| Tan | Shall meet the value in Table 1,Tble 2, Table 3 | Perform a heat temperature at 1505 for 30min then place room temp. for 242hr. |
| Withstanding Voltage | No dielectric breakdown or mechanical breakdown | 250% of the rated voltage for 1~5 sec. Current is limited to less than 50mA |
| Temperature Capacitance Coefficient | Class: NPO -55 ~ +125 30 ppm/ Class: X7R -55 ~+125 22%; X7S -55 ~+125 22%; X6S -55 ~+105 22%; X5R -55 ~+85 15%; Y5V -30 ~+85 +22% ~-82%; Y5U -30 ~+85 +22% ~-56%; Z5U +10 ~+85 +22% ~-56% | T1: Standard Temperature(20) T2: Test Temperature C1:Capacitance At Standard Temperature(20) C2: Capacitance At Test Temperature (T2) |
| Adhesive Strength Of Termination | No indication of peeling shall occur on the terminal electrode. | A 5Nf(0.5Kgf) pull force shall be applied for 10 1 second. |
| Resistance to Flexure of Substrate | Appearance No mechanical damage or capacitance change more than the following table. | The board shall be bend 1.0mm with a rate of 1.0 mm/sec. |
| Solderability | More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve. | Solder Temperature : 245 5 Dip Time : 5 0.5sec Immersing Speed : 2510% mm/s Solder : H63A Flux :Rosin Preheat : At 80~120 for 10~30sec. |
| Resistance To Soldering Heat | Appearance No mechanical damage shall occur. Capacitance change: Class (NPO) Within 2.5% or 0.25pF whichever is larger of initial value; X7R/X7S/X6S/X5R 7.5% of initial value; Y5V/Y5U/Z5U 20% of initial value | Preheat : at 150 10 for 60~120sec. Dip : solder temperature of 260 5 Dip Time : 10 1sec. Immersing Speed : 2510% mm/s Solder : H63A Flux :Rosin Measure at room temperature after cooling for Class: 24 2 Hours Class: 48 4 Hours |
| Temperature Cycle | Appearance No mechanical damage shall occur. Capacitance Change: Class (NPO) Within 5.0% or 0.5pF whichever is larger of initial value; X7R/X7S/X6S/X5R 12.5% of initial value; Y5V/Y5U/Z5U 30% of initial value | Capacitor shall be subjected to five cycles of the temperature cycle as following: Step Temp.() Time(min) 1 Min Rated Temp. +0/-3 30 2 25 3 3 Min Rated Temp. +3/-0 30 4 25 3 Measure at room temperature after cooling for Class: 24 2 Hours Class: 48 4 Hours |
| Humidity | Appearance No mechanical damage shall occur. Capacitance Change: Class (NPO) Within 7.5% or 0.75pF whichever is larger of initial value; X7R/X7S/X6S/X5R 12.5% of initial value; Y5V/Y5U/Z5U 30% of initial value | Temperature : 40 2 Relative Humidity : 90 ~ 95%RH Test Time : 500 +12/-0Hr Measure at room temperature after cooling for Class: 24 2 Hours Class: 48 4 Hours |
| Humidity Load | Appearance No mechanical damage shall occur. Capacitance Change: Class (NPO) Within 7.5% or 0.75pF whichever is larger of initial value; X7R/X7S/X6S/X5R 12.5% of initial value; Y5V/Y5U/Z5U 30% of initial value | Applied Voltage :Rated Voltage Temperature : 40 2 Relative Humidity : 90 ~ 95%RH Test Time : 500 +12/-0Hr Current Applied : 50 mA Max. Measure at room temperature after cooling for Class: 24 2 Hours Class: 48 4 Hours |
2410121643_IHHEC-C0402Y474M010T_C961501.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
