<
>
Specifications
Voltage Rating:
50V
Capacitance:
680pF
Temperature Coefficient:
NP0
Tolerance:
±5%
Mfr. Part #:
C0603N681J050TBXF
Package:
0603
Key Attributes
Model Number:
C0603N681J050TBXF
Product Description
Product Overview
The NCC-X-024-2202 IHHEC is a Multilayer Ceramic Chip Capacitor (MLCC) designed for electric equipment with voltage ratings from 4V to 50V. It is suitable for general electric circuits, telecommunications, personal computers and peripherals, power circuits, and mobile applications. This product is compliant with RoHS and HF standards.
Product Attributes
- Brand: IHHEC (a trademark of Holy Stone Enterprise Co., Ltd)
- Certifications: RoHS & HF compliant
Technical Specifications
| Part Number Code | Nominal Capacitance | Tolerance | Rated Voltage | Temperature Characteristics | Chip Size (mm) | Thickness (mm) | Operation Temperature Range |
| C0603N681J050T | 680.0 pF | 5.00 % | 50 Vdc | NPO (-55~+125, 30 ppm/) | 1.600.80 (0603) | 0.850.15 | -55 ~ +125 |
Performance
| No. | Item | Specification | Test Condition |
| 1 | Visual | No abnormal exterior appearance | Visual Inspection |
| 2 | Dimension | See Page 2 | Visual Inspection |
| 3 | Insulation Resistance | 10,000M min | Applied Voltage: Rated Voltage, Charge Time : 605 sec. Charge-Discharge current shall be less than 50mA current. |
| 4 | Capacitance | Within The Specified Tolerance | Class |
| 5 | Q | 1000 (More Than 30pF) | Class |
| 6 | Withstanding Voltage | No dielectric breakdown or mechanical breakdown | 250% of the rated voltage for 1~5 sec. charge/discharge Current is less than 50mA. |
| 7 | Temperature Capacitance Coefficient | 30 ppm/ | Class NPO -55 ~ +125 |
| 8 | Adhesive Strength Of Termination | 0201----2N( 0.2 Kgf), 0402/0603----5N( 0.5 Kgf), 0805----10N(1.0 Kgf) | Pull force shall be applied for 10 1 second. |
| 9 | Resistance to Flexure of Substrate | Appearance: No mechanical damage or capacitance change more than the table. Capacitance Change: NPO(N) 5.0% | The board shall be bend 3.0mm with a rate of 1.0 mm/sec. The duration of the applied forces shall be 5 1sec. |
| 10 | Solderability | More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve. | Solder Temperature : 245 5, Dip Time : 5 0.5sec, Immersing Speed : 2510% mm/s, Solder : Lead Free Solder, Flux :Rosin, Preheat : At 80~120 for 10~30sec. |
| 11 | Resistance To Soldering Heat | Appearance: No mechanical damage. Capacitance Class (NPO) 2.5%, Q Class To satisfy the specified initial value, Insulation Resistance To satisfy the specified initial value | Preheat : at 150 10 for 60~120sec. Dip : solder temperature of 260 5, Dip Time : 10 1sec. Immersing Speed : 2510% mm/s, Flux :Rosin, Measure at room temperature after cooling for Class: 24 2 Hours |
| 12 | Temperature Cycle | Appearance: No mechanical damage. Capacitance Class (NPO) 2.5%, Q Class To satisfy the specified initial value, Insulation Resistance To satisfy the specified initial value | Capacitor shall be subjected to five cycles of the temperature cycle as following: Measure at room temperature after cooling for Class: 24 2 Hours |
| 13 | Humidity | Appearance: No mechanical damage. Capacitance Class (NPO) 2.5%, Q Class 30pF & Over : Q 350, Insulation Resistance 1000M min. | Temperature : 40 2, Relative Humidity : 90 ~ 95%RH, Test Time : 500 +12/-0Hr, Measure at room temperature after cooling for Class: 24 2 Hours |
| 14 | Humidity Load | Appearance: No mechanical damage. Capacitance Class (NPO) Within 7.5% or 0.75pF whichever is larger of initial value, Q Class 30pF & Over : Q 350, Insulation Resistance 500M min. | Applied Voltage :Rated Voltage, Temperature : 40 2, Relative Humidity : 90 ~ 95%RH, Test Time : 500 +12/-0Hr, Current Applied : 50 mA Max. Measure at room temperature after cooling for Class: 24 2 Hours |
| 15 | High Temperature Load (Life Test) | Appearance: No mechanical damage. Capacitance Class (NPO) Within 5.0% or 0.5pF whichever is larger of initial value, Q Class 30pF & Over : Q 350, Insulation Resistance 1,000M min. | Applied Voltage: Rated Voltage, Temperature: max. operation temperature, Test Time : 1000 +48/-0 Hr, Current Applied : 50mA Max, Measure at room temperature after cooling for Class: 24 2 Hours |
| 16 | Vibration | Appearance: No mechanical damage. Capacitance Within the specified tolerance, Q Class To satisfy the specified initial value, Insulation Resistance To satisfy the specified initial value | Solder the capacitor on P.C. board. Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3 perpendicular directions. |
Dimensions
| TYPE | L | W | T | B (min) | BW (min) |
| 0603 | 1.60 0.10 | 0.80 0.10 | 0.85 0.15 | 0.40 | 0.15 |
Packing
Bulk Packing available upon customer request. Chip Capacitors are available in Tape Packing.
2409292333_IHHEC-C0603N681J050TBXF_C4355184.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
