Product Overview
The Hyncdz E2 Series are solid electrolyte aluminum electrolytic capacitors designed for high-performance applications. They feature low ESR, high ripple current capability, and a load life of 2000 hours at 105. These capacitors are RoHS compliant and suitable for a wide operating temperature range of -55 to +105.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Lead pin type)
- Color: (Red)
- Certifications: RoHS Compliant
Technical Specifications
| Series | Capacitance (F) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor (tan) @ 120Hz, +20 (Max.) | Leakage Current @ 2min, +20 (A) | ESR @ 100KHz, +20 (m) | Ripple Current @ 100KHz (mArms) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E2 | 100 | 20 (M) | 16 | 18.4 | 0.12 | 320 | 35 | 2100 | 2000 | 5 | 7 | 2 | 0.5 |
Dimensions
| D (mm) | P (mm) | d (mm) | (mm) |
|---|---|---|---|
| 5 | 2.0 | 0.5 | 1.0 (L<16) |
| 6.3 | 2.5 | 0.6 | 1.5 (16L<22) |
| 8 | 3.5 | 0.6 | 2.0 (L22) |
| 10 | 5.0 | 0.6 | 2.0 |
Operating Precautions
Polarity: Hyncdz capacitors are polarized and must not be reversed. Reverse connection can lead to shortened lifespan due to increasing leakage current or short circuits.
Prohibited Circuits: Avoid use in high impedance, coupling, time constant, series connection for higher withstand voltage, or circuits sensitive to leakage current. Contact Hyncdz for specific applications like time constant circuits or series connections.
Over Voltage: Do not exceed the rated voltage, even momentarily, as it may cause a short circuit.
Sudden Charge and Discharge: Avoid sudden charge and discharge to maintain reliability. Use protection circuits if rush current exceeds 10A or 10x the maximum allowable ripple current. A 1k resistor is recommended for charge/discharge during leakage current testing.
Operating Temperature and Ripple Current: Exceeding the upper temperature limit or allowable ripple current can shorten lifespan or cause failure.
Leakage Current: Leakage current may slightly increase after soldering but can self-repair with applied DC voltage.
Applied Voltage: For optimal reliability, apply less than 80% of the rated voltage. The peak value of DC and AC voltage should not exceed the rated voltage.
Marking
Each unit is marked indelibly with Series and trademark, Capacitance, Work voltage, and Negative polarity.
2410121438_HYNCDZ-E2101M016A070HY_C22447055.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
