Product Overview
The Hyncdz E2 Series solid electrolyte aluminum electrolytic capacitors (E-CAP) are designed for high performance and reliability. Featuring low ESR, high ripple current capability, and a load life of 2000 hours at 105, these capacitors are RoHS compliant. They are suitable for a wide range of applications requiring stable and efficient electrical performance.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Pin Type)
- Color: (Red)
- Certifications: RoHS Compliant
- Origin: (Not specified in text)
- Material: (Detailed in structure chart, not a primary attribute for web content)
Technical Specifications
| Part No. | Description | Capacitance (F) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor (Max.) (120Hz/+20) | Leakage Current (Max.) (2min, A) (+20) | ESR (Max.) (100KHz/+20) (m) | Ripple Current (Max.) (100KHz) (mArms) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) |
| E2102M025D140HY | (E-CAP) | 1000 | 20 | 25 | 28.8 | 0.12 | 5000 | 25 | 4500 | 2000 | 8 | 14 | 3.5 | 0.6 |
Detailed Specifications
| Item | Characteristics |
| Category Temperature Range | -55 ~ +105 |
| Rated Voltage Range | 2.5 ~ 25V |
| Low Temperature Characteristics | Z(-25)/Z(+20) 1.25 (100KHz) Z(-55)/Z(+20) 1.25 (Max.Impedance Ratio) |
| Endurance | 105, Rated voltage, 2000 hours. Capacitance change 20%, D.F.(tan) 150% of specified, ESR 150% of specified, Leakage current specified value. |
| Damp Heat (Steady State) | 60, 90%~95% RH, Rated voltage, 1000 hours. Capacitance change 20% of initial value, D.F.(tan) 150% of specified value, ESR 150% of specified value, Leakage current specified value. |
| Surge Voltage Characteristic | Surge Voltage = Rated voltage 1.15(V). Tested at 105 for 1000 cycles (30s charge, 5min 30s discharge). Appearance: No significant damage. Capacitance change 20% of initial value, D.F.(tan) 150% of specified value, ESR 150% of specified value, Leakage current specified value. |
Ripple Current Coefficient
| Frequency (Hz) | Coefficient |
| 120HzF1KHz | 0.05 |
| 1KHzF10KHz | 0.30 |
| 10KHzF100KHz | 0.70 |
| 100KHzF500KHz | 1.00 |
Explanation of Parts Numbers
E2 4 7 1 M 6 R 3 C 0 8 0 H Y
Series: E2
Nominal Capacitance: 471 (470F)
Rated Voltage: 025 (25V)
Diameter: 08 (8mm)
Color: H (Red)
Length: 140 (14mm)
Tolerance: M (20%)
Operating Precautions
Polarity: Do not reverse polarity to prevent shortened lifespan or short circuits.
Prohibited Circuits: Not for use in high impedance, coupling, time constant circuits, series connections for higher withstand voltage, or circuits sensitive to leakage current variations. Contact manufacturer for use in time constant circuits or series connections.
Over Voltage: Do not exceed rated voltage, even for an instant, to avoid short circuits.
Sudden Charge/Discharge: Avoid sudden charge and discharge. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. Use a 1k resistor for charge/discharge when measuring leakage current.
Operating Temperature and Ripple Current: Exceeding upper temperature limits or excessive ripple current can shorten lifespan or cause failure.
Leakage Current: May increase slightly due to soldering. DC voltage application allows self-repair and gradual reduction.
Applied Voltage: Recommended applied voltage is less than 80% of rated voltage. Peak DC and AC voltage should not exceed rated voltage.
Marking
Each component or unit pack will be marked indelibly with Series and trademark, Capacitance, Work voltage, and Negative polarity.
2410121438_HYNCDZ-E2102M025D140HY_C22447062.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
