Product Overview
The Hyncdz E2 Series solid electrolyte aluminum electrolytic capacitors (E-CAP) are designed for high performance and reliability. They feature low ESR, high ripple current capability, and a load life of 2000 hours at 105. These capacitors are RoHS compliant and suitable for a wide range of electronic applications requiring stable and efficient power delivery.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Lead Pin Type)
- Certifications: RoHS Compliant
Technical Specifications
| Series | Capacitance (uF) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor (tan) 120Hz/+20 (Max.) | Leakage Current 2min(uA) +20 | ESR 100KHz +20(m) | Ripple Current 100KHz (mArms) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) | Color |
| E2 | 220 | 20 | 16 | 18.4 | 0.12 | 704 | 18 | 3100 | 2000 | 6.3 0.5 | 8 1 | 2.5 0.5 | 0.6 0.05 | (Red) |
Key Features and Performance
Category Temperature Range:
-55 ~ +105
Rated Voltage Range:
2.5 ~ 25V
Endurance:
2000 hours at 105 with rated voltage. Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current specified value.
Damp Heat (Steady State):
1000 hours at 60, 90%95% RH with rated voltage. Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current specified value.
Surge Voltage:
Surge Voltage = Rated voltage 1.15(V). Tested for 1000 cycles at 105.
Dimensions
| D | L | P | d | |
| 6.3 | 8 | 2.5 | 0.6 | 1.0 (L<16) |
Operating Precautions
- Polarity: Hyncdz capacitors are polarized and must not be reverse connected.
- Prohibited Circuits: Avoid use in high impedance, coupling, time constant, or series connection circuits where leakage current is critical. Contact Hyncdz for specific applications.
- Over voltage: Do not exceed the rated voltage, even momentarily.
- Sudden charge and discharge: Avoid sudden charge/discharge. A protection circuit is recommended for rush currents exceeding 10A or 10x allowable ripple current.
- Operating temperature and ripple current: Exceeding temperature limits or ripple current can shorten life and increase leakage.
- Leakage current: May slightly increase after soldering but can self-repair with applied DC voltage.
- Applied voltage: Recommended to operate below 80% of rated voltage for reliability. Peak DC and AC voltage should not exceed rated voltage.
Marking
Each unit is marked with series, trademark, capacitance, rated voltage, and negative polarity.
2410121438_HYNCDZ-E2221M016C080HY_C22447073.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
