<
>
Specifications
Voltage Rating:
10V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Diameter:
6.3mm
Mfr. Part #:
E2331M010C080HY
Package:
Through Hole,D6.3xL8mm
Key Attributes
Model Number:
E2331M010C080HY
Product Description
Product Overview
The Hyncdz E2 Series solid electrolyte aluminum electrolytic capacitors are designed for high-performance applications, offering low ESR and high ripple current capabilities. With a load life of 2000 hours at 105 and RoHS compliance, these capacitors are suitable for demanding electronic circuits. They are available in a lead-pin type with a capacitance of 330F and a rated voltage of 10V.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Lead-pin type)
- Color: (Red)
- Certifications: RoHS Compliant
Technical Specifications
| Series | Capacitance (F) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor (tan) Max. (120Hz, +20) | Leakage Current Max. (A) (2min, +20) | ESR Max. (m) (100KHz, +20) | Ripple Current Max. (mArms) (100KHz) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E2 | 330 | 20 | 10 | 11.5 | 0.12 | 660 | 16 | 3100 | 2000 | 6.3 | 8 | 2.5 | 0.6 |
Key Features
- Low ESR, high ripple current
- Load life of 2000 hours at 105
- RoHS Compliant
Operating Precautions
- Polarity: Do not reverse polarity to prevent damage and shortened lifespan.
- Prohibited Circuits: Not suitable for high impedance, coupling, time constant, or series connection for higher withstand voltage circuits without consultation.
- Over Voltage: Do not exceed rated voltage, even momentarily, to avoid short circuits.
- Sudden Charge/Discharge: Avoid sudden charge and discharge. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. A 1k resistor is recommended for leakage current testing.
- Operating Temperature and Ripple Current: Exceeding upper temperature limits or excessive ripple current can shorten lifespan and increase leakage.
- Leakage Current: May increase slightly after soldering but can self-repair with DC voltage.
- Applied Voltage: Recommended applied voltage should be less than 80% of the rated voltage. Peak DC and AC voltage should not exceed rated voltage.
Marking
- Series and trademark
- Capacitance
- Rated voltage
- Negative polarity
2410121438_HYNCDZ-E2331M010C080HY_C22447182.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
