<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Diameter:
6.3mm
Mfr. Part #:
E2331M6R3C080HY
Package:
Through Hole,D6.3xL8mm
Key Attributes
Model Number:
E2331M6R3C080HY
Product Description
Product Overview
The E2 Series Solid Electrolyte Aluminum Electrolytic Capacitor (E-CAP) from Hyncdz offers low ESR and high ripple current capabilities. Designed for a load life of 2000 hours at 105, these capacitors are RoHS compliant and suitable for various electronic applications requiring reliable performance.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Lead pin type)
- Certifications: RoHS Compliant
Technical Specifications
| Series | Capacitance (F) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor (Max.) (120Hz/+20) | Leakage Current (Max.) (2min, +20) | ESR (Max.) (100KHz, +20) (m) | Ripple Current (Max.) (100KHz) (mArms) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) | Color |
| E2 | 330 | 20 (M) | 6.3 | 7.2 | 0.08 | 416 (I0.2CV or 500A) | 15 | 3100 | 2000 | 6.3 | 8 | 2.5 | 0.6 | (Red) |
Detailed Specifications
Category Temperature Range
-55 ~ +105
Rated Voltage Range
2.5 ~ 25V
Low Temperature Characteristics
- Z(-25)/Z(+20) 1.25 (100KHz)
- Z(-55)/Z(+20) 1.25 (Max.Impedance Ratio)
Endurance (105, 2000 hours)
- Appearance: No significant damage
- Capacitance change: 20% of the initial value
- D.F.(tan): 150% of the specified value
- ESR: 150% of the specified value
- Leakage current: The specified value
Damp Heat (Steady State) (60, 90%~95% RH, 1000 hours)
- Appearance: No significant damage
- Capacitance change: 20% of the initial value
- D.F.(tan): 150% of the specified value
- ESR: 150% of the specified value
- Leakage current: The specified value
Surge Voltage (105)
Surge Voltage = Rated voltage 1.15(V)
- 1000 cycles (charge 30s, discharge 5m30s)
- Appearance: No significant damage
- Capacitance change: 20% of the initial value
- D.F.(tan): 150% of the specified value
- ESR: 150% of the specified value
- Leakage current: The specified value
Dimensions (mm)
| D | 5 | 6.3 | 8 | 10 |
| P | 2.0 | 2.5 | 3.5 | 5.0 |
| d | 0.5 | 0.6 | 0.6 | 0.6 |
| (L16) | 1.0 | (16L22)1.5 | (L22)2.0 |
Ripple Current Correction Coefficient
| Frequency (Hz) | 120HzF1KHz | 1KHzF10KHz | 10KHzF100KHz | 100KHzF500KHz |
| Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
Explanation of Parts Numbers
| Series Code | Nominal Capacitance Code | Voltage Code | Diameter Code | Color Code | Length Code | Tolerance Code | Lead Forming Type Code |
| E2 | 471 (470F) | 6R3 (6.3V) | C (6.3) | H (Red) | 080 (8) | M (20%) | Y ( - Long lead) |
Operating Precautions
- Polarity: Hyncdz capacitors are polarized and must not be reversed to prevent shortened lifespan due to increased leakage current or short circuits.
- Prohibited Circuits: Not suitable for high impedance, coupling, time constant circuits, series connection for higher withstand voltage, or circuits sensitive to leakage current variations. Contact Hyncdz for specific applications like time constant circuits or series connections.
- Over voltage: Exceeding rated voltage, even momentarily, can cause short circuits.
- Sudden Charge and Discharge: Avoid sudden charge/discharge. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. A 1k resistor is recommended for leakage current measurement.
- Operating Temperature and Ripple Current: Operating above the upper temperature limit or with excess ripple current can shorten lifespan or cause failure.
- Leakage Current: May slightly increase after soldering but can self-repair with DC voltage application.
- Applied Voltage: Recommended to operate below 80% of rated voltage. Peak DC and AC voltage should not exceed rated voltage.
Marking
Each component or unit pack will be marked indelibly and legibly with: Series and trademark, Capacitance, Rated voltage, Negative polarity.
2410121438_HYNCDZ-E2331M6R3C080HY_C22447191.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
