Product Overview
The HRK CD110 series plug-in aluminum electrolytic capacitors are designed for general-purpose applications requiring stable performance at elevated temperatures. These capacitors feature a black sleeve with white lettering, offering a capacitance of 33uF and a rated voltage of 400V, with a tolerance of -20% to +20%. They are rated for operation up to 105 and are suitable for long-term reliable operation within a wide temperature range. The capacitors are manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd. and adhere to relevant industry standards, ensuring quality and performance for various electronic circuits.
Product Attributes
- Brand: HRK ()
- Series: CD110
- Product Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: Shenzhen, China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| HRK P/N | Series | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (tan, max) (%) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms) (105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (Not Specified) | CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 |
General Specifications
| Item | Test Conditions / Method | Judgment Standard |
|---|---|---|
| Operating Temperature Range | Rated voltage applied | -40 ~ +105 |
| Lead Wire Tensile Strength | Applied tensile force for 101 sec | See table for values (0.45mm: 5N, 0.5mm: 10N, 0.6mm: 20N) |
| Lead Wire Bending Strength | Applied bending force | See table for values (0.45mm: 2.5N, 0.5mm: 5N, 0.6mm: 10N) |
| Vibration Test | Frequency Range: 10~55Hz, Amplitude: 1.5mm, Duration: 2 hours per direction (6 hours total) | Capacitance stable, 5% change, no visible defects |
| Solderability | Dipped in rosin solution, then in solder at 2455 | Over 90% of immersed lead surface tinned |
| Resistance to Soldering Heat | Dipped in solder at 2605 (101s) or 35010 (3~4s) | Capacitance change 10%, tan spec, leakage spec, no significant visual abnormality |
| Damp Heat (Steady State) | 405, 90~95% RH for 2408 hours | Capacitance change 20%, tan 1.2x spec, leakage spec, no significant visual abnormality |
| Rapid Temperature Change | 5 cycles of -40 to +105 | Capacitance change 10%, tan spec, leakage spec, no significant visual abnormality |
| Endurance | Rated voltage and ripple current at max temp for rated life | Capacitance change 20%, tan 2x spec, leakage spec, no significant visual abnormality |
| High Temperature Storage | 1052 without voltage for 1000+48/-0 hours | Capacitance change 20%, tan 2x spec, leakage spec, no significant visual abnormality |
| Anti-explosion | AC or DC voltage applied | Safety vent opens without flame, or no vent opening within 30 min is acceptable |
Packaging
| Product Size DxL(mm) | Bags/Small Box | Pieces/Small Box | Small Boxes/Outer Box | Pieces/Outer Box | Small Box Dimensions | Outer Box Dimensions | |
|---|---|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 3200 | 2 | 6400 | 290*225*295 | 470*315*320 |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; observe correct polarity.
- Do not apply reverse voltage or DC voltage exceeding rated voltage.
- Ripple current should be less than the rated value to prevent overheating and reduced lifespan.
- Operate within the rated temperature range for optimal lifespan.
- Store in a cool, dry environment. If leakage current increases after long storage, pre-charge before use.
- Not suitable for circuits with frequent charge/discharge cycles.
- Avoid mechanical stress on leads during installation.
- Prolonged soldering time or high temperatures may damage the sleeve.
- Do not use halogenated organic cleaning agents. If cleaning is necessary, use approved agents and dry thoroughly.
- Do not use halogenated organic fixing or coating agents, especially near the sealing area.
- Recommended storage conditions: 35, <75% RH, out of direct sunlight. Shelf life is 12 months.
- Dispose of according to local industrial waste regulations.
- Refer to EIAJ RCR-2367B for more details.
Environmental Statement
This product complies with RoHS Directive (no exemptions), REACH Annex XIV (SVHC), 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), and Sony SS-00259 (18th Edition).
2508181355_HRK-CD110107M1E0612VFL_C7499982.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
