Product Overview

The CD110 series of plug-in aluminum electrolytic capacitors are designed for general-purpose applications. These capacitors feature a black sleeve with white markings and are rated for operation at 105. They offer stable performance with a wide operating temperature range of -40 to +105 and are manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd.

Product Attributes

• Brand: HRK ()
• Series: CD110
• Sleeve Color: Black
• Marking Color: White
• Origin: Shenzhen, China
• Certifications/Standards Referenced: SJ/T11000-2023, RoHS, REACH, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (Edition 18)

Technical Specifications

Component Materials

Operating Conditions

Packaging Information

Usage Precautions

• Aluminum electrolytic capacitors are polarized; ensure correct polarity during installation. Reverse connection can cause short circuits or capacitor damage. Use non-polarized capacitors if polarity is uncertain or may be reversed.
• Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding the rated voltage significantly increases leakage current and can damage the capacitor. Use at rated voltage for optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for short periods.
• Ripple current should be kept below the rated value. Exceeding the rated ripple current can cause internal heating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage should not exceed the rated working voltage.
• Operate capacitors within the rated temperature range. Operation above the upper limit temperature will drastically reduce lifespan or activate the safety vent. Operation at room temperature ensures a longer lifespan. For every 10 decrease in ambient temperature, the lifespan doubles.
• After prolonged storage, leakage current may increase, especially at higher storage temperatures. Store in a suitable environment. Applying voltage will decrease leakage current over time. If increased leakage current affects the circuit, pre-charge the capacitor before use.
• Capacitors are not suitable for circuits with frequent charge/discharge cycles. Capacitance may decrease due to oxidation of the negative electrode's oxide film, or the capacitor may be damaged by heat generated during charge/discharge.
• Improper installation or stress on lead wires can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, correct PCB hole spacing, do not bend lead wires excessively, and avoid bending or twisting the capacitor body during soldering.
• During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
• Do not clean aluminum electrolytic capacitors with halogenated organic solvents. If cleaning is necessary, use a cleaner that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry the capacitor and PCB with hot air for at least 10 minutes, ensuring the hot air temperature does not exceed the capacitor's upper temperature limit.
• Do not use fixatives or coating agents containing halogenated organic compounds. Avoid completely sealing the capacitor's vent with fixatives or coating agents.
• Recommended storage conditions: below 35, relative humidity less than 75% RH, away from direct sunlight. The product's shelf life is 12 months from the date of manufacture. If stored beyond 12 months, check electrical characteristics and solderability.
• For disposal of capacitors, contact a local industrial waste disposal service.
• Refer to EIAJ RCR-2367B for more details.

Environmental Statement

Shenzhen Hongruikai Electronic Technology Co., Ltd. guarantees that all products, packaging, and materials delivered directly or indirectly are free from the following substances:

• Compliance with current RoHS Directive without any exemptions.
• Absence of Substances of Very High Concern (SVHC) listed in REACH Annex XIV.
• Compliance with Directive 2006/22/EC (PFOA/PFOS).
• Compliance with Directive 2005/84/EC (16P).
• Compliance with ZEK 01.2-08 (Polycyclic Aromatic Hydrocarbons).
• Compliance with Sony SS-00259, Edition 18 environmental requirements.