<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
33uF
Height - Seated (Max):
18mm
Voltage Rating:
400V
Diameter:
10mm
Mfr. Part #:
CD110336M2G1018VFL
Package:
Through Hole,D10xL18mm
Key Attributes
Model Number:
CD110336M2G1018VFL
Product Description
Product Overview
The CD110 series of plug-in aluminum electrolytic capacitors are designed for general-purpose applications. These capacitors feature a black sleeve with white lettering for clear marking and are rated for operation at 105. They offer stable performance with a wide operating temperature range of -40 to +105 and are manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd. Key applications include general electronics where reliable capacitance and voltage rating are required.
Product Attributes
- Brand: HRK (Shenzhen Hongruikai Electronic Technology Co., Ltd.)
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Certifications/Standards Referenced: SJ/T11000-2023, RoHS, REACH, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (Edition 18), EIAJ RCR-2367B
Technical Specifications
| HRK P/N (Supplier P/N) | Series | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (tan, max, %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms) (105, 100KHz) | Durability (Hrs, at 105) | Diameter (D) (mm) | Height (L) (mm) | Lead Diameter (d) (mm) | Lead Spacing (F) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110-33uF-400V | CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.45 - 0.8 | 5.0 |
General Specifications
| Item | Test Conditions / Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Circuit: Series Equivalent Circuit, Test Frequency: 120Hz, Test Voltage: Rated Voltage | Within the error range of rated capacitance (see Table-1) |
| Dissipation Factor (DF) | Less than or equal to the dissipation factor in Table-1 | |
| Leakage Current (LC) | Apply rated DC voltage across the capacitor with a 100010 series resistor for 2 minutes, then measure leakage current. | Less than or equal to the leakage current in Table-1 |
| Surge Voltage | At 15~35, apply surge voltage through a protection resistor of (10050)/CR (K) for 305 seconds, discharge for 5.50.5 minutes per cycle, for 1000 cycles. | Capacitance change rate: within 15% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no visible abnormalities. |
| Temperature Characteristics | Test Temperatures: 255, -253, -403, +1053 | Impedance ratio (Stage 2, 3 vs Stage 1): not exceeding upper table values. Capacitance change rate (vs Stage 1): not exceeding 25%. Dissipation factor: not exceeding 5 times specification. Leakage current: not exceeding specification. |
| Lead Tensile Strength | Apply specified tensile force to leads for 101 seconds. | (See Table for values based on lead diameter) |
| Lead Bending Strength | (See Table for values based on lead diameter) | No obvious appearance change, no lead breakage or loosening. |
| Vibration Test | 10~55Hz, 1.5mm amplitude, 2 hours per direction for 3 directions (total 6 hours). | Capacitance test: stable value. Capacitance change: within 5% of initial value. Appearance: no defects. |
| Solderability | Dip leads in rosin solution (25% by weight) for 5-10 seconds, then dip in solder at 2455 up to 1.5-2.0mm from the capacitor body. | Approximately 90% of the immersed lead surface area should be covered with new solder. |
| Soldering Heat Resistance | Dip leads below 1.5-2.0mm from the body in solder at 2605 (101 sec) or 35010 (3-4 sec), then measure after 1-2 hours at normal temperature and humidity. | Capacitance change rate: within 10% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Damp Heat (Steady State) | Place in 405, 90-95% RH environment for 2408 hours, then measure after 1-2 hours at normal temperature and humidity. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 1.2 times specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Temperature Rapid Change | Subject to 5 cycles of thermal shock: +25 (3min) -40 (30min) +25 (3min) +105 (30min) +25 (3min). Measure after 1-2 hours at normal temperature and humidity. | Capacitance change rate: within 10% of initial value. Dissipation factor: not greater than specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Endurance | Apply rated voltage and ripple current at the upper temperature limit for the rated life, then measure after 1-2 hours in a standard environment. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 2 times specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| High Temperature Storage | Store at 1052 without voltage for 1000+48/-0 hours, recover for 16 hours, then measure. | Capacitance change rate: within 20% of initial value. Dissipation factor: not exceeding 2 times specification. Leakage current: not greater than specification. Appearance: no significant abnormalities. |
| Anti-explosion | a) AC Power Test: Apply 0.7x rated voltage (50/60Hz) or 250V AC (whichever is lower). b) DC Power Test: Apply 1A DC reverse voltage for diameter 22.4mm, or 10A DC reverse voltage for diameter >22.4mm. | Safety vent should operate without flame. If the vent does not operate after 30 minutes, performance is considered satisfactory. |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity is uncertain or may be reversed.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can cause damage. Using at rated voltage ensures longevity. Surge voltage is the maximum voltage the capacitor can withstand for a short period.
- Ripple current should be less than the rated value. Exceeding the rated ripple current causes overheating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage should not exceed the rated working voltage.
- Use within the rated temperature range. Operating above the upper limit significantly shortens lifespan or may activate the safety vent. Operating at room temperature ensures a longer lifespan; every 10 decrease in ambient temperature can double the lifespan.
- After long-term storage, leakage current may increase, especially at higher storage temperatures. Store in a suitable environment. Leakage current will decrease when voltage is applied. If high leakage current affects the circuit, pre-charge the capacitor before use.
- Not suitable for circuits with frequent charge/discharge cycles, as capacity may decrease due to oxidation of the negative electrode film or damage from generated heat.
- Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, correct PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
- During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
- Do not clean with halogenated organic solvents. If cleaning is necessary, use a cleaner that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry with hot air (not exceeding the capacitor's upper temperature limit) for at least 10 minutes.
- Do not use halogenated organic series fixing agents or coating agents. Avoid completely sealing the capacitor's sealing area with these agents.
- Recommended storage conditions: ~35, <75% RH, out of direct sunlight. Shelf life is 12 months from the production date. If stored beyond 12 months, check electrical characteristics and solderability.
- Dispose of capacitors according to local industrial waste regulations.
Environmental Statement
This company guarantees that all or part of the products, packaging, directly or indirectly delivered to the customer (including subsidiaries and affiliated companies), do not contain the following substances:
- Compliance with current RoHS Directive, no exemptions.
- All goods/materials do not contain Substances of Very High Concern (SVHC) listed in REACH Annex XIV.
- Compliance with Directive 2006/22/EC (PFOA/PFOS).
- Compliance with Directive 2005/84/EC (16P).
- Compliance with ZEK 01.2-08 (Polycyclic Aromatic Hydrocarbons).
- Compliance with Sony SS-00259, Edition 18 environmental requirements.
2508181355_HRK-CD110336M2G1018VFL_C7499977.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
