<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
220uF
Height - Seated (Max):
12mm
Voltage Rating:
16V
Diameter:
6.3mm
Mfr. Part #:
CD1102271CM0612VFL
Package:
Through Hole,D6.3xL12mm
Key Attributes
Model Number:
CD1102271CM0612VFL
Product Description
Product Overview
This specification sheet details the CD110 series of plug-in aluminum electrolytic capacitors, designed for general-purpose applications. These capacitors offer a capacitance of 33uF and a rated voltage of 400V, with a tolerance of -20% to +20% and an operating temperature range of -40 to +105. They feature a black sleeve with white printing for markings, a diameter of 13mm, and a height of 17mm. The CD110 series is manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd. and adheres to relevant industry standards, including SJ/T11000-2023.
Product Attributes
- Brand: HRK ()
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: Shenzhen, China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| Ours P/N () | Series () | Rated Capacitance () (uF) | Rated Voltage () (V) | Capacitance Tolerance () (%) | Dissipation Factor () (%, max) | Leakage Current () (uA, max) | Surge Voltage () (V) | Equivalent Impedance () (, 20, 100KHz) | Rated Ripple Current () (mA rms) (105, 100KHz) | Durability () (Hrs, at 105) | Diameter (D) (mm) | Height (L) (mm) | Lead Diameter (d) (mm) | Lead Length (F) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110-33uF/400V | CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.6 | 5.0 |
Operating Conditions
| Parameter | Condition |
|---|---|
| Operating Temperature Range | -40 ~ +105 |
| Standard Test Environment Temperature | 20 to 35 |
| Standard Test Environment Humidity | 45% to 75% RH |
| Standard Test Environment Atmospheric Pressure | 86Kpa to 106Kpa |
Component Materials
| Component | Material |
|---|---|
| Aluminum Foil | Aluminum |
| Separator Paper | Wood Pulp |
| Electrolyte | Ethylene Glycol, Ammonium Adipate |
| Case | Aluminum |
| Rubber Seal | EPDM Rubber |
| Lead Wire | Tin-plated Copper Clad Steel Wire |
| Sleeve | Polyvinyl Chloride (PVC) |
Packaging Information
| Product Size (DxL mm) | Bags per Inner Box | Pieces per Inner Box | Inner Boxes per Outer Box | Pieces per Outer Box | Inner Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 2 | 6400 | 290*225*295 | 470*315*320 |
Reliability Testing Standards (Summary)
| Test Item | Test Conditions/Methods | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Frequency: 120Hz, Test Voltage: Rated Voltage | Within tolerance range specified in Table-1 |
| Dissipation Factor (DF) | Less than or equal to the value in Table-1 | |
| Leakage Current (LC) | Applied rated voltage with 100010 resistor for 2 minutes | Less than or equal to the value in Table-1 |
| Surge Voltage | 1000 cycles of charging and discharging | Capacitance change rate: 15% within initial value; DF: specification value; LC: specification value; Appearance: No visible abnormalities. |
| Temperature Characteristics | Tests at -40, -25, +25, +105 | Impedance ratio, Capacitance change rate, DF, LC within specified limits. |
| Lead Tensile Strength | Applied tensile force for 101 seconds | No obvious appearance change, no lead breakage or loosening. |
| Lead Bending Strength | Rotational bending test | No obvious appearance change, no lead breakage or loosening. |
| Vibration Test | 10-55Hz, 1.5mm amplitude, 2 hours per direction | Capacitance stable, change rate: 5% within initial value; Appearance: No defects. |
| Solderability | Immersion in rosin solution then solder bath at 2455 | Approx. 90% of immersed lead surface should be covered with new tin. |
| Soldering Heat Resistance | Immersion in solder bath at 2605 or 35010 | Capacitance change rate: 10% within initial value; DF: specification value; LC: specification value; Appearance: No significant abnormalities. |
| Damp Heat (Steady State) | 405, 90-95% RH for 2408 hours | Capacitance change rate: 20% within initial value; DF: 1.2 times specification value; LC: specification value; Appearance: No significant abnormalities. |
| Rapid Temperature Change | Temperature cycling between -40 and +105 | Capacitance change rate: 10% within initial value; DF: specification value; LC: specification value; Appearance: No significant abnormalities. |
| Endurance | Rated voltage and ripple current at rated lifetime temperature | Capacitance change rate: 20% within initial value; DF: 2 times specification value; LC: specification value; Appearance: No significant abnormalities. |
| High Temperature Storage | 1052 without voltage for 1000+48/-0 hours | Capacitance change rate: 20% within initial value; DF: 2 times specification value; LC: specification value; Appearance: No significant abnormalities. |
| Anti-explosion | AC or DC voltage test | Safety vent should operate without flame, or not operate within 30 minutes, both considered acceptable. |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity during installation. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity is uncertain or may be reversed.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can lead to damage. Using at rated voltage ensures optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for short periods.
- Ripple current should be kept below the rated value. Exceeding the rated ripple current causes overheating, capacitance reduction, and shortened lifespan. The sum of ripple voltage peak and DC voltage should not exceed the rated working voltage.
- Operate capacitors within the rated temperature range. Operation above the upper limit significantly reduces lifespan or activates the safety vent. Operation at room temperature ensures a longer lifespan. For every 10 decrease in ambient temperature, lifespan doubles.
- After prolonged storage, leakage current may increase, especially at higher storage temperatures. Store in a suitable environment. Leakage current will decrease after voltage is applied. If increased leakage current affects the circuit, pre-charge the capacitor before use.
- Capacitors are not suitable for circuits with frequent charge/discharge cycles. Capacity may decrease due to oxidation of the negative electrode's oxide film, or damage may occur from heat generated during charge/discharge.
- Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, correct PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
- During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
- Do not use halogenated organic solvents for cleaning aluminum electrolytic capacitors. If cleaning is necessary, use a cleaner that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry with hot air (not exceeding the capacitor's upper temperature limit) for at least 10 minutes after cleaning.
- Do not use halogenated organic compound fixing agents or coatings. Avoid completely sealing the capacitor's sealing area with fixing or coating agents.
- Recommended storage conditions: below 35, relative humidity less than 75% RH, away from direct sunlight. Product shelf life is 12 months from the date of manufacture. If storage exceeds 12 months, check electrical characteristics and solderability.
- For disposal, contact a local industrial waste disposal service.
- Refer to EIAJ RCR-2367B for more details.
Environmental Statement
Shenzhen Hongruikai Electronic Technology Co., Ltd. guarantees that all products, packaging, and materials delivered directly or indirectly comply with the following environmental regulations, without any exemptions:
- RoHS Directive
- REACH Annex XIV (SVHC)
- 2006/22/EC (PFOA/PFOS)
- 2005/84/EC (16P)
- ZEK 01.2-08 (Polycyclic Aromatic Hydrocarbons)
- Sony SS-00259 (18th Edition)
Sample Test Report
Customer Name: [Not Specified]
Customer P/N: [Not Specified]
Product Size: 13*17mm
Product Series: CD110
Specification Description: 33uF/400v
Test Date: 2025.08.15
Temperature Range: -40~105
Sample Quantity: 10 Pcs
Test Environment Temperature: 25
Test Environment Humidity: 65% RH
| Test Item | Performance Requirement | Test Conditions | Results | Judgment |
|---|---|---|---|---|
| Capacitance (uF) | 20% (26.4~39.6uF) | 120Hz, Rated Voltage | 30.14 ~ 30.23 | Pass |
| Dissipation Factor (%) | 24% | 120Hz | 4.31 ~ 4.36 | Pass |
| Leakage Current (uA) | 436uA | 120Hz, WV/60S | 22 ~ 28 | Pass |
| Equivalent AC Impedance () | [Not Specified] | 100KHz | 13.12 | Pass |
2508181355_HRK-CD1102271CM0612VFL_C7493893.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
