<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
470uF
Height - Seated (Max):
17mm
Voltage Rating:
35V
Pin Spacing:
5mm
Diameter:
10mm
Tolerance:
±20%
Mfr. Part #:
35V470uF CD110
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
35V470uF CD110
Product Description
Product Overview
The HRK CD110 series is a standard plug-in type aluminum electrolytic capacitor designed for general-purpose applications. It features a black sleeve with white markings and operates reliably within a wide temperature range of -40 to +105. These capacitors are suitable for long-term operation under rated voltage and are manufactured to meet stringent quality and environmental standards, including RoHS compliance.
Product Attributes
- Brand: HRK ()
- Product Type: Plug-in Type Aluminum Electrolytic Capacitor
- Series: CD110
- Sleeve Color: BLACK ()
- Marking Color: White ()
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| HRK P/N | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (Max, %) | Leakage Current (Max, uA) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 |
General Specifications
| Parameter | Specification |
|---|---|
| Operating Temperature Range | -40 to +105 |
| Standard Reference | SJ/T11000-2023 |
| Lead Wire Diameter (d) | 0.45mm to 1.0mm (depending on model) |
| Lead Wire Length (F) | 1.6mm to 10mm (depending on model) |
| Sleeve Material | Polyvinyl Chloride (PVC) |
| Seal Material | EPDM Rubber |
| Electrolyte | Ethylene Glycol, Ammonium Adipate |
| Case Material | Aluminum |
| Separator Paper Material | Wood Pulp |
| Aluminum Foil Material | Aluminum |
| Lead Wire Material | Tin-plated copper-clad steel wire |
| Storage Temperature Recommendation | 35, 75% RH, avoid direct sunlight |
| Shelf Life | 12 months (recommend checking characteristics if exceeded) |
Packaging Information
| Product Size (DxL mm) | Bags per Small Box | Pieces per Small Box | Small Boxes per Outer Box | Pieces per Outer Box | Small Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 2 | 6400 | 290*225*295 | 470*315*320 |
Ripple Current Frequency Factor Coefficients
| Frequency (Hz) | Coefficient |
|---|---|
| 60Hz | 0.65 (Under 10uF), 0.70 (10C100), 0.75 (100C1000), 0.80 (1,000 up above) |
| 120Hz | 1.00 (All Capacitance Ranges) |
| 300Hz | 1.15 (Under 10uF & 10C100), 1.18 (100C1000), 1.05 (1,000 up above) |
| 1KHz | 1.40 (Under 10uF & 10C100), 1.30 (100C1000), 1.12 (1,000 up above) |
| 10KHz~ | 1.50 (Under 10uF & 10C100), 1.35 (100C1000), 1.15 (1,000 up above) |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity during installation. Reverse connection can cause short circuits or damage.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can lead to damage. Use within rated voltage for optimal lifespan.
- Ripple current should be kept below the rated value to prevent overheating, capacity reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage must not exceed the rated working voltage.
- Operate within the rated temperature range. Exceeding the upper limit temperature will drastically reduce lifespan or activate the safety vent. Operating at room temperature ensures a longer lifespan; lifespan doubles for every 10C decrease in ambient temperature.
- Leakage current may increase after prolonged storage, especially at higher temperatures. If high leakage current impacts the circuit, pre-charge the capacitor before use.
- Not suitable for circuits with frequent charge/discharge cycles, as this can lead to capacity reduction due to anode oxidation or damage from generated heat.
- Improper installation or stress on leads can damage internal structure, leading to high leakage current or leakage. Ensure good soldering, correct PCB hole spacing, avoid bending leads, and do not bend or twist the capacitor body during soldering.
- Soldering or tinning at excessive temperatures or durations may cause sleeve cracking or shrinkage.
- Do not use halogenated organic cleaning agents. If cleaning is necessary, use approved agents and ensure the capacitor is dried for at least 10 minutes with hot air (not exceeding the upper temperature limit) after cleaning.
- Avoid using halogenated organic fixing or coating agents, especially covering the sealing area.
- Dispose of capacitors according to local industrial waste regulations.
Environmental Statement
HRK guarantees that all products delivered comply with RoHS Directive without any exemptions. Products are free from Substances of Very High Concern (SVHC) listed in REACH Annex XIV, and comply with directives concerning PFOA/PFOS, 16P, Polycyclic Aromatic Hydrocarbons (PAHs), and Sony SS-00259 (18th Edition).
2508181355_HRK-35V470uF-CD110_C2960394.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
