<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
22uF
Height - Seated (Max):
20mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Tolerance:
±20%
Mfr. Part #:
400V22uF CD110
Package:
Through Hole,D10xL20mm
Key Attributes
Model Number:
400V22uF CD110
Product Description
Product Overview
The CD110 series is a standard type of plug-in aluminum electrolytic capacitor designed for reliable long-term operation. It features a black sleeve with white lettering for clear identification and operates within a wide temperature range of -40 to +105. This capacitor is suitable for various applications requiring stable electrical performance, with specific attention to ripple current management for extended lifespan. It adheres to industry standards and comes with comprehensive testing and usage guidelines.
Product Attributes
- Brand: HRK ()
- Product Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
- Reference Standard: SJ/T11000-2023
Technical Specifications
| Ours P/N () | Series () | Rated Capacitance () (uF) | Rated Voltage () (V) | Capacitance Tolerance (%) | Dissipation Factor () (%, Max) | Leakage Current () (uA, Max) | Surge Voltage () (V) | Equivalent Impedance () (, 20, 100KHz) | Rated Ripple Current () (mA rms) (105, 100KHz) | Durability () (Hrs, at 105) | Diameter (D) (mm) | Height (L) (mm) | Lead Diameter (d) (mm) | Lead Spacing (F) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.60 | 5.0 |
Product Details
| Component | Material |
|---|---|
| Aluminum Foil | Aluminum |
| Separator Paper | Wood Pulp |
| Electrolyte | Ethylene Glycol, Ammonium Adipate |
| Case | Aluminum |
| Rubber Seal | EPDM Rubber |
| Lead Wire | Tinned Copper Clad Steel Wire |
| Sleeve | Polyvinyl Chloride (PVC) |
Operating Conditions
| Parameter | Condition |
|---|---|
| Operating Temperature Range | -40 to +105 |
| Standard Test Environment Temperature | 20 to 35 |
| Standard Test Environment Humidity | 45% to 75% RH |
| Standard Test Environment Atmospheric Pressure | 86Kpa to 106Kpa |
Packaging Information
| Product Size (DxL mm) | Bag Quantity per Small Box | Small Boxes per Outer Box | Total Pieces per Outer Box | Inner Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 3200 | 290*225*295 | 470*315*320 |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity during installation. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity is uncertain or may be reversed.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can lead to capacitor damage. Use at rated voltage for optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for a short duration.
- Ripple current should be kept below the rated value. Exceeding the rated ripple current can cause internal heating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage should not exceed the rated working voltage.
- Operate capacitors within the rated temperature range. Exceeding the upper limit temperature will significantly shorten lifespan or activate the safety vent. Operation at room temperature ensures a longer lifespan. For every 10C decrease in ambient temperature, the lifespan doubles.
- After prolonged storage, leakage current may increase, especially at higher storage temperatures. Store in a cool, dry environment away from direct sunlight. If leakage current is a concern for the circuit, pre-charge the capacitor before use.
- Not suitable for circuits with frequent charge/discharge cycles, as this can lead to capacitance reduction due to negative electrode oxide film oxidation or damage from generated heat.
- Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, appropriate PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
- During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
- Do not use halogenated organic solvents for cleaning. If cleaning is necessary, use a cleaning agent that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry the capacitor and PCB with hot air for at least 10 minutes, ensuring the hot air temperature does not exceed the capacitor's upper temperature limit.
- Avoid using fixatives and coatings containing halogenated organic compounds. Do not seal the capacitor's vent with fixatives or coatings.
- Recommended storage conditions: below 35, relative humidity less than 75% RH, away from direct sunlight. Shelf life is 12 months from the date of manufacture. If storage exceeds 12 months, check electrical characteristics and solderability.
- Dispose of capacitors according to local industrial waste regulations.
- Refer to EIAJ RCR-2367B for more details.
Environmental Statement
The company guarantees that all products, packaging, and materials delivered directly or indirectly comply with the following environmental regulations:
- RoHS Directive (no exemptions)
- REACH Appendix XIV (SVHC substances)
- 2006/22/EC (PFOA/PFOS)
- 2005/84/EC (16P)
- ZEK 01.2-08 (Polycyclic Aromatic Hydrocarbons)
- Sony SS-00259 (18th Edition)
2508181355_HRK-400V22uF-CD110_C2960288.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
