<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
470uF
Height - Seated (Max):
7mm
Pin Spacing:
2.5mm
Voltage Rating:
10V
Diameter:
6mm
Ripple Current:
210mA@100kHz
Mfr. Part #:
CD110477M1A0607VFL
Package:
Through Hole,D6xL7mm
Key Attributes
Model Number:
CD110477M1A0607VFL
Product Description
Product Overview
The HRK CD110 series are standard aluminum electrolytic capacitors designed for general-purpose applications. These plug-in type capacitors feature a black sleeve with white markings, offering reliable performance at operating temperatures up to 105. They are suitable for various electronic circuits requiring stable capacitance and good ripple current handling.
Product Attributes
- Brand: HRK ()
- Product Type: Plug-in Type Aluminum Electrolytic Capacitor
- Series: CD110
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, PFOA/PFOS, 16P, ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| HRK P/N | Series | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (Max. %) | Leakage Current (uA, Max.) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms) (105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110477M1A0607VFL | CD110 | 470 | 6.3 | -20~+20 | 22 | 47 | 8 | 210 | 2,000 | 6 | 7 |
General Specifications
| Item | Specification |
|---|---|
| Operating Temperature Range | -40 to +105 |
| Reference Standard | SJ/T11000-2023 |
| Lead Wire Diameter (d) | 0.45mm to 1.0mm (depending on size) |
| Lead Spacing (D) | 1.6mm to 10mm (depending on size) |
| Case Diameter (F) | 4mm to 10mm (depending on size) |
| Case Height (L) | 5mm to 10mm (depending on size) |
| Packaging (for 6*7mm) | 1000 pcs/bag, 25 bags/inner box, 2 inner boxes/outer box (50,000 pcs/outer box) |
Product Testing Standards
| Item | Test Condition/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Series equivalent circuit, 120Hz, within rated voltage | Within tolerance specified in Table-1 |
| Dissipation Factor (DF) | Less than or equal to the value in Table-1 | |
| Leakage Current (LC) | Rated DC voltage applied for 2 min with 1000 resistor | Less than or equal to the value in Table-1 |
| Surge Voltage | 1000 cycles at 15-35 | Capacitance change within 15%, DF spec, LC spec, no visible abnormality |
| Temperature Characteristics | Tests at -40, -25, +25, +105 | Impedance ratio, capacitance change, DF, LC within limits |
| Lead Tensile Strength | Applied tensile force for 101 sec | No visible appearance change, no lead breakage or looseness |
| Lead Bending Strength | Applied bending force | No visible appearance change, no lead breakage or looseness |
| Vibration Test | 10-55Hz, 1.5mm amplitude, 6 hours total | Capacitance stable, change within 5%, no appearance defects |
| Solderability | Immersion in 2455 solder bath | Approx. 90% of immersed lead surface covered with new solder |
| Endurance | Rated voltage and ripple current at max temp for rated life | Capacitance change within 20%, DF 2x spec, LC spec, no abnormality |
| High Temperature Storage | 1000+48/-0 hours at 1052 without voltage | Capacitance change within 20%, DF 2x spec, LC spec, no abnormality |
| Anti-explosion | AC or DC voltage/current applied | Safety vent opens, no flame; or vent does not open within 30 min |
Usage Precautions
- Polarity: Observe correct polarity; use non-polarized capacitors if polarity is uncertain or reversible.
- Voltage: Do not apply reverse voltage or DC voltage exceeding rated voltage. Use within rated voltage for optimal lifespan. Surge voltage is the maximum temporary voltage.
- Ripple Current: Keep ripple current below rated value to prevent overheating, capacitance drop, and shortened lifespan. Peak ripple voltage plus DC voltage must be less than rated voltage.
- Temperature: Operate within the rated temperature range (-40 to +105). Lower ambient temperatures significantly extend lifespan.
- Storage: Long-term storage can increase leakage current, especially at higher temperatures. Leakage current decreases after applying voltage. Pre-charge if high leakage current is detrimental.
- Frequent Charge/Discharge: Not suitable for circuits with frequent charge/discharge cycles due to potential capacity reduction and damage from heat.
- Installation: Avoid mechanical stress on leads or body during installation and soldering.
- Soldering: Avoid prolonged exposure to high temperatures during soldering to prevent damage to the sleeve.
- Cleaning: Do not use halogenated organic solvents. If cleaning is necessary, use compatible solvents and dry thoroughly with hot air (not exceeding max. temperature).
- Fixatives/Coatings: Avoid halogenated organic compounds and do not seal the capacitor's vent.
- Storage Recommendations: Store in a cool, dry place (35, <75% RH), out of direct sunlight. Shelf life is 12 months; check characteristics if stored longer.
- Disposal: Contact local industrial waste disposal services.
- Further Information: Refer to EIAJ RCR-2367B.
2508131754_HRK-CD110477M1A0607VFL_C7499930.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
