<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
22uF
Height - Seated (Max):
11mm
Voltage Rating:
50V
Diameter:
5mm
Mfr. Part #:
CD1102261HM0511VFL
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
CD1102261HM0511VFL
Product Description
Product Overview
The CD110 series of plug-in aluminum electrolytic capacitors from HRK Electronics are designed for general-purpose applications. These capacitors feature a black sleeve with white marking and a rated operating temperature range of -40 to +105. They are suitable for various electronic circuits requiring stable capacitance and reliable performance under specified conditions.
Product Attributes
- Brand: HRK ()
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 Edition 18.
Technical Specifications
| HRK P/N | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (max, %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 |
General Specifications
| Item | Condition/Method | Standard |
|---|---|---|
| Reference Standard | SJ/T11000-2023 | |
| Operating Temperature Range | Under rated DC voltage | -40 ~ +105 |
| Testing Environment | Standard | Temp: 20-35, Humidity: 45-75% RH, Pressure: 86-106 KPa |
| Structure Components | Aluminum Foil, Separator Paper (Wood Pulp), Electrolyte (Ethylene Glycol, Ammonium Adipate), Aluminum Case, Rubber Seal (EPDM), Lead Wire (Tinned Copper Clad Steel), Sleeve (PVC) | |
| Packaging (13*17mm) | Bag/Small Box: 200 pcs, Small Box/Outer Box: 16, Outer Box Qty: 6400 pcs. Outer Box Dimensions: 470*315*320 mm. |
Reliability & Performance Tests
| Item | Test Conditions/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | 120Hz, Series Equivalent Circuit | Within tolerance range (see Table-1) |
| Dissipation Factor (DF) | Value in Table-1 | |
| Leakage Current (LC) | Rated voltage + 1000 resistor for 2 min | Value in Table-1 |
| Surge Voltage | 1000 cycles (30s charge, 5.5min discharge) | Capacitance change: 15% of initial, DF: spec, LC: spec, Appearance: No abnormality |
| Temperature Characteristics | -40, -25, +25, +105 | Impedance Ratio: value in table; Capacitance change: 25% of initial; DF: 5x spec; LC: spec |
| Lead Tensile Strength | Applied force for 10s | See table for force values based on lead diameter |
| Lead Bending Strength | Rotated 90 each way, 1 cycle | No visible change, no lead breakage |
| Vibration Test | 10-55Hz, 1.5mm amplitude, 2 hrs/direction | Capacitance stable, change: 5% of initial, Appearance: No defect |
| Solderability | Dipped in rosin, then 2455 solder | 90% of dipped lead surface coated with new tin |
| Endurance | Rated voltage & ripple current at max temp for rated life | Capacitance change: 20% of initial, DF: 2x spec, LC: spec, Appearance: No abnormality |
| High Temperature Storage | 1052, no voltage, 1000+48/-0 hrs | Capacitance change: 20% of initial, DF: 2x spec, LC: spec, Appearance: No abnormality |
| Anti-explosion | AC or DC voltage test | Safety vent operates without flame, or no operation within 30 min is acceptable. |
Usage Precautions
- Polarized: Ensure correct polarity. Use non-polarized capacitors if polarity is uncertain.
- Voltage: Do not exceed rated voltage or apply reverse voltage. Use within rated voltage for optimal lifespan.
- Ripple Current: Keep ripple current below rated value to prevent overheating and capacity reduction. Peak ripple voltage + DC voltage must be less than rated voltage.
- Temperature: Operate within rated temperature range. Lower ambient temperature extends lifespan.
- Storage: Long-term storage may increase leakage current, especially at higher temperatures. Pre-charge if necessary.
- Frequent Charge/Discharge: Not suitable for circuits with frequent charge/discharge cycles.
- Installation: Avoid stress on leads. Ensure good soldering, proper PCB hole spacing, and do not bend leads or body.
- Soldering: Avoid excessive soldering time/temperature to prevent sleeve damage.
- Cleaning: Do not use halogenated organic solvents. If cleaning is necessary, use appropriate solvents and dry with hot air (not exceeding max temp).
- Fixing Agents: Do not use halogenated organic series fixing agents or coatings. Avoid sealing the capacitor's sealing area.
- Storage Recommendation: Store in a cool, dry place (<35, <75% RH), away from direct sunlight. Shelf life is 12 months. Check characteristics if stored longer.
- Disposal: Contact local industrial waste disposal services.
- Further Information: Refer to EIAJ RCR-2367B.
2508181355_HRK-CD1102261HM0511VFL_C7493830.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
