<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
3300uF
Height - Seated (Max):
25mm
Pin Spacing:
5mm
Voltage Rating:
16V
Diameter:
10mm
Ripple Current:
2.2A@100kHz
Tolerance:
±20%
Mfr. Part #:
CD288338M1C1025VFL
Package:
Through Hole,D10xL25mm
Key Attributes
Model Number:
CD288338M1C1025VFL
Product Description
Product Overview
The CD288 series of plug-in type aluminum electrolytic capacitors from Hongruikai Electronics Technology Co., Ltd. are designed for high-frequency, low-impedance applications. Featuring a green sleeve with gold lettering, these capacitors offer a capacitance of 3300uF and a rated voltage of 16V, with a wide operating temperature range of -40 to +105. They are suitable for various electronic circuits requiring stable performance and reliability.
Product Attributes
- Brand: Hongruikai ()
- Product Name: Plug-in Type Aluminum Electrolytic Capacitor ()
- Series: CD288
- Sleeve Color: GREEN ()
- Marking Color: Gold ()
- Origin: Shenzhen, China
- Certifications: Compliant with RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition).
Technical Specifications
| Supplier P/N | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (Max, %) | Leakage Current (Max, uA) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CD288338M1C1025VFL | 3300 | 16 | -20~+20 | 20 | 528 | 20 | 0.022 | 2200 | 2000 | 10 | 25 |
| Item | Test Conditions / Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Series equivalent circuit, 120Hz, Rated voltage | Within tolerance range specified in Table-1 |
| Dissipation Factor (DF) | - | Less than or equal to the value in Table-1 |
| Leakage Current (LC) | Applied rated voltage with 100010 resistor for 2 minutes | Less than or equal to the value in Table-1 |
| Surge Voltage | 15~35, 1000 cycles (30s charge, 5.5min discharge) | Capacitance change: 15% of initial value; DF: specification value; LC: specification value; Appearance: No visible abnormality. |
| Temperature Characteristics | -40 to +105 | Impedance ratio, Capacitance change: 25% of initial value; DF: 5 times specification value; LC: specification value. |
| Lead Pull Strength | Applied specified pull force for 101 sec | Refer to table for values based on lead diameter. |
| Lead Bend Strength | Rotated 90 degrees in each direction | No obvious appearance change, no lead breakage or looseness. |
| Vibration Test | 10~55Hz, 1.5mm amplitude, 2 hours per direction (6 hours total) | Capacitance stable, change: 5% of initial value; Appearance: No defects. |
| Solderability | Dipped in rosin solution, then in 2455 solder | 90% or more of dipped lead surface area should be tinned. |
| Soldering Heat Resistance | Dipped in 2605 or 35010 solder | Capacitance change: 10% of initial value; DF: specification value; LC: specification value; Appearance: No significant abnormality. |
| Damp Heat (Steady State) | 405, 90~95% RH for 2408 hours | Capacitance change: 20% of initial value; DF: 1.2 times specification value; LC: specification value; Appearance: No significant abnormality. |
| Rapid Temperature Change | Temperature cycles from +25 to -40 and +105 | Capacitance change: 10% of initial value; DF: specification value; LC: specification value; Appearance: No abnormality. |
| Endurance | Rated voltage and ripple current at rated life temperature for rated life | Capacitance change: 20% of initial value; DF: 2 times specification value; LC: specification value; Appearance: No significant abnormality. |
| High Temperature Storage | 1052 without voltage for 1000+48/-0 hours | Capacitance change: 20% of initial value; DF: 2 times specification value; LC: specification value; Appearance: No significant abnormality. |
| Anti-explosion | AC or DC voltage applied | Safety vent opens, no flame; or no vent opening for 30 minutes. |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity is uncertain or may be reversed.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current, leading to damage. Use at rated voltage for guaranteed lifespan. Surge voltage is the maximum voltage the capacitor can withstand for a short period.
- Ripple current should be kept below the rated value. Exceeding the rated ripple current can cause overheating, capacitance reduction, and shortened lifespan. The sum of ripple voltage peak and DC voltage should not exceed the rated working voltage.
- Operate within the rated temperature range. Operating above the upper limit significantly shortens lifespan or activates the safety vent. Operation at room temperature ensures a longer lifespan. For every 10 decrease in ambient temperature, lifespan doubles.
- Leakage current may increase after prolonged storage, especially at higher storage temperatures. Store in a suitable environment. Leakage current will decrease after applying voltage. If increased leakage current affects the circuit, pre-charge the capacitor before use.
- Not suitable for circuits with frequent charge/discharge cycles. Capacitance may decrease due to oxidation of the negative electrode's oxide film, or damage may occur from heat generated during charge/discharge.
- Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, correct PCB hole spacing, do not bend leads excessively, and do not bend or twist the capacitor body during soldering.
- During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
- Do not use halogenated organic solvents for cleaning. If cleaning is necessary, use a cleaner that guarantees capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry with hot air (not exceeding the capacitor's upper temperature limit) for at least 10 minutes.
- Do not use fixing agents or coatings containing halogenated organic compounds. Avoid completely sealing the capacitor's sealing area with fixing agents or coatings.
- Recommended storage: below 35, <75% RH, out of direct sunlight. Product shelf life is 12 months from the factory. If stored beyond 12 months, check electrical characteristics and solderability.
- Dispose of capacitors according to local industrial waste regulations.
- Refer to EIAJ RCR-2367B for more details.
Environmental Statement
This company guarantees that all or part of the products, including products and packaging, directly or indirectly delivered to the customer (including subsidiaries and affiliated companies), do not contain the following substances:
- Compliant with the current RoHS directive, without any exemptions.
- All goods/materials do not contain Substances of Very High Concern (SVHC) listed in REACH Annex XIV.
- Compliant with Directive 2006/22/EC (PFOA/PFOS).
- Compliant with Directive 2005/84/EC (16P).
- Compliant with ZEK 01.2-08 (Polycyclic Aromatic Hydrocarbons) directive.
- Meets Sony SS-00259, 18th Edition environmental requirements.
2411201102_HRK-CD288338M1C1025VFL_C42388785.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
