<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
10uF
Height - Seated (Max):
7mm
Voltage Rating:
50V
Diameter:
5mm
Mfr. Part #:
CD1101061HM0507VFL
Package:
Through Hole,D5xL7mm
Key Attributes
Model Number:
CD1101061HM0507VFL
Product Description
Product Overview
The HRK CD110 series plug-in aluminum electrolytic capacitors are designed for general-purpose applications, offering reliable performance at elevated temperatures. These capacitors feature a black sleeve with white markings and are suitable for use within a wide operating temperature range of -40 to +105. They are manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd. and adhere to industry standards for quality and environmental compliance.
Product Attributes
- Brand: HRK ()
- Product Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: BLACK ()
- Marking Color: White ()
- Origin: Shenzhen, China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| HRK P/N | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (Max, %) | Leakage Current (Max, uA) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 |
Additional Technical Data
| Item | Test Condition/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Frequency: 120Hz; Test Voltage: Rated Voltage | Within rated capacitance tolerance (See Table-1) |
| Dissipation Factor (DF) | N/A | Less than or equal to the dissipation factor in Table-1 |
| Leakage Current (LC) | Apply rated voltage + 100010 resistor for 2 minutes | Less than or equal to the leakage current in Table-1 |
| Surge Voltage | 1000 cycles (30s charge, 5.5min discharge) at 15~35 | Capacitance change: 15% of initial value; DF: specification; LC: specification; Appearance: No visible abnormality |
| Temperature Characteristics | Test at -40, -25, +25, +105 | Impedance ratio: specified values; Capacitance change: 25% of stage 1; DF: 5x specification; LC: specification |
| Lead Pull Strength | Apply specified tensile force for 101 sec | See table for Lead Wire Diameter (mm) vs. Tensile Strength (N {kgf}) and Bending Strength (N {kgf}) |
| Lead Bending Strength | Apply specified bending force | No obvious appearance change, no lead breakage or loosening |
| Vibration Test | 10~55Hz, 1.5mm amplitude, 2 hours per direction (6 hours total) | Capacitance stable, change: 5% of initial value; Appearance: No defects |
| Solderability | Dip in rosin solution, then in solder at 2455 | Approx. 90% of immersed lead surface area should be covered with new tin |
| Soldering Heat Resistance | Dip leads in solder at 2605 (101s) or 35010 (3~4s) | Capacitance change: 10% of initial value; DF: specification; LC: specification; Appearance: No significant abnormality |
| Damp Heat (Steady State) | 405, 90~95% RH for 2408 hours | Capacitance change: 20% of initial value; DF: 1.2x specification; LC: specification; Appearance: No significant abnormality |
| Rapid Temperature Change | 5 cycles of: +25(3min) -40(30min) +25(3min) +105(30min) +25(3min) | Capacitance change: 10% of initial value; DF: specification; LC: specification; Appearance: No significant abnormality |
| Durability | Rated voltage and ripple current at rated life upper temperature | Capacitance change: 20% of initial value; DF: 2x specification; LC: specification; Appearance: No significant abnormality |
| High Temperature Storage | 1052 without voltage for 1000+48/-0 hours | Capacitance change: 20% of initial value; DF: 2x specification; LC: specification; Appearance: No significant abnormality |
| Anti-explosion | AC or DC voltage test | Safety vent opens without flame; or no vent opening after 30 min is also acceptable |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; ensure correct polarity during installation.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage.
- Ripple current should be less than the rated value to prevent overheating and reduced lifespan.
- Operate within the rated temperature range (-40 to +105) for optimal lifespan.
- Long-term storage may increase leakage current; pre-charging may be necessary.
- Not suitable for circuits with frequent charge/discharge cycles.
- Avoid mechanical stress on leads during installation and soldering.
- Use appropriate cleaning agents; avoid halogenated organic solvents.
- Store in a cool, dry environment (35, <75% RH) away from direct sunlight. Shelf life is 12 months.
- Dispose of according to local industrial waste regulations.
Environmental Statement
Shenzhen Hongruikai Electronic Technology Co., Ltd. guarantees that all products delivered comply with RoHS directive (no exemptions), do not contain Substances of Very High Concern (SVHC) listed in REACH Annex XIV, and comply with directives 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), and Sony SS-00259 (18th Edition).
2508181355_HRK-CD1101061HM0507VFL_C7493816.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
