<
>
Specifications
Voltage Rating:
16V
Capacitance:
100nF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
CGA0201X5R104K160ET
Package:
0201
Key Attributes
Model Number:
CGA0201X5R104K160ET
Product Description
Product Overview
The CGA0201X5R104K160ET is a multilayer ceramic capacitor (MLCC) designed for general-purpose applications. It features an X5R temperature characteristic, a capacitance of 100nF, and a rated voltage of 16Vdc. This product is supplied in tape and reel packaging.
Product Attributes
- Brand: CGA (Implied from part number)
- Origin: Not specified
- Material: Ceramic dielectric, Nickel inner electrode, Copper outer electrode, Tin layer
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Part Number | Size (mm) | Capacitance | Tolerance | Rated Voltage | Temperature Characteristic | Temperature Range | Capacitance Change Rate | Packaging | Quantity per Reel |
| CGA0201X5R104K160ET | 0.60 x 0.30 x 0.30 | 100nF | 10% | 16Vdc | X5R | -55 to +85 | 15% | Tape & Reel (180mm) | 15,000 |
Test Specifications
| Test Item | Test Specification | Test Method (Reference Standard) |
| Appearance | No defects or abnormalities. | Visual (Microscope) inspection. |
| Dimension | Conforms to specifications. | Micrometer inspection of physical dimensions. |
| Voltage Proof | Withstand test voltage without defects or abnormalities. | 250% RV for RV50V; 200% RV for 50VRV250V; 150% RV for 250VRV630V; 120% RV for 630VRV1000V. Test time: 1-5s. Max charging/discharging current: 50mA. |
| Insulation Resistance (I.R.) | 4G (for X7R/X5R) | Test Temperature: 25. Between terminals. Test Voltage: 500V: Rated Voltage; >500V: 500V. Charging time: 1 minute. Max charging/discharging current: 50mA. |
| Capacitance | Within specified tolerance. | Measurement Temperature: 25. Frequency: 120Hz24Hz for C10F, 1.00.1 KHz for C>10F. Voltage: 0.5V0.1Vrms for C10F, 1.00.2Vrms for C>10F. |
| Q Factor / Dissipation Factor (D.F.) | C10F: 3.5% (for C103), 5.0% (for 104C>103), 10% (for 104C106). C>10F: 15%. | Measurement Temperature: 25. Frequency: 120Hz24Hz for C10F, 1.00.1 KHz for C>10F. Voltage: 0.5V0.1Vrms for C10F, 1.00.2Vrms for C>10F. |
| Temperature Characteristics of Capacitance | X5R: 15%; X7R: 15% | Measurement at specified temperature stages after thermal equilibrium. Steps: 1. 252, 2. Lowest operating temp 3, 3. 252, 4. Highest operating temp 2, 5. 252. Measurement after 5 minutes at each stage. |
| Adhesive Strength of Termination | No termination peel-off, ceramic breakage. | Welded to test substrate. Force: 5N (0402: 2.5N / 0201: 1N). Time: 101s. Direction: Horizontal to P.C. board at center. |
| Substrate Bending Test | Appearance: No defects or abnormalities. C/C: X7R/X5R: 10% (General Series), 12.5% (High Capacitance Series). | Capacitor reflow soldered on P.C. board, then bent 1mm. |
| Solderability | 95% of terminals should be uniformly and continuously soldered. | Solder: Sn-3.0Ag-0.5Cu (Lead-free). Flux: Isopropyl alcohol Rosin 25% solid solution. Solder Temp: 2455C. Dwell time: 20.5s. Solder position: Until both ends are completely wetted. |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance Change: X7R/X5R: 7.5%. Q/DF: Same as initial. Insulation Resistance: Same as initial. Voltage Proof: No defects or abnormalities. | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Solder bath method: Solder Sn-3.0Ag-0.5Cu. Test Temp: 2605C. Test time: 101s. Preheating temp: 110 to 140. Preheating time: 1 minute. Post-treatment: Stand at room temp for 242 hours. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance Change: X7R/X5R: 7.5%. Q/DF: Same as initial. Insulation Resistance: Same as initial. | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. 5 cycles. Steps: Lowest temp 3 (303 min), Room temp (2-5 min), Highest temp 3 (303 min), Room temp (2-5 min). Post-treatment: Stand at room temp for 242 hours. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance Change: X5R/X7R: 12.5%. Q/DF: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: 500M or R.C5s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Test Temp: 402. Test Humidity: 90%-95%RH. Test time: 50024 hours. Test Voltage: Rated voltage (max 630V). Charging/discharging current: Max 50mA. Voltage conditioning: 1 hour at test temp/voltage, then 242 hours in ambient conditions before measurement. |
| Life Test | Appearance: No defects or abnormalities. Capacitance Change: X5R/X7R: 12.5%. Q/DF: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: X5R/X7R: 1G or R.C50s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Test Temp: Highest operating temp 3. Test time: 100012 hours. Test Voltage: 100% R.V. Charging/discharging current: Max 50mA. Voltage conditioning: 1 hour at test temp/voltage, then 242 hours in ambient conditions before measurement. |
2509180925_HRE-CGA0201X5R104K160ET_C6119750.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
