<
>
Specifications
Voltage Rating:
25V
Capacitance:
100nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
CGA0603X7R104K250JT
Package:
0603
Key Attributes
Model Number:
CGA0603X7R104K250JT
Product Description
Product Overview
The CGA0603X7R104K250JT is a multilayer ceramic capacitor (MLCC) with X7R temperature characteristics. It offers a capacitance of 100nF and a rated voltage of 25Vdc. This specification applies to multilayer ceramic capacitors.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Dielectric ceramic, internal electrodes (nickel), external electrodes (copper), tin layer
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Model | Dimensions (mm) (L*W*T) | Temperature Characteristic | Capacitance | Capacitance Tolerance | Rated Voltage | Packaging |
| CGA0603X7R104K250JT | 1.600.20 * 0.800.20 * 0.800.20 | X7R | 100nF | 10% | 25Vdc | 4,000 pcs/180mm Reel |
| Test Item | Specification | Test Method (Reference Standard: JIS C 5101, IEC60384) |
| Appearance | No defects or abnormalities. | Visual (microscope) inspection of product. |
| Dimensions | Conforms to specifications. | Check physical dimensions of equipment using a micrometer. |
| Voltage Proof | Withstand test voltage without defects or abnormalities. | X7R/X5R: RV50V: 250% RV; 50VRV250V: 200% RV; 250VRV630V: 150% RV; 630VRV1000V: 120% RV. Test time: 1 to 5 seconds. Max charging/discharging current: 50mA. |
| Insulation Resistance (I.R.) | 4G | Test temperature: 25. Test points: Between terminals. Test voltage: 500V: Rated voltage; >500V: 500V. Charging time: 1 minute. Max charging/discharging current: 50mA. |
| Capacitance | Within specified tolerance. | Measurement temperature: 25. Material: X7R/X5R. Capacitance: 104 (100nF). Frequency: 1.00.1 KHz (for C10 uF), 120Hz24Hz (for C10 uF). Voltage: 1.00.2Vrms (for C10 uF), 0.5V0.1Vrms (for C10 uF). |
| Q Factor / Dissipation Factor (D.F.) | C103: 3.5%; 104C103: 5.0%; 104C106: 10%; C106: 15%. | Measurement temperature: 25. Material: X7R/X5R. Frequency: 1.00.1 KHz (for C10 uF), 120Hz24Hz (for C10 uF). Voltage: 1.00.2Vrms (for C10 uF), 0.5V0.1Vrms (for C10 uF). |
| Temperature Characteristics of Capacitance | X7R: 15% | Measurement steps at specified temperature stages. Step 1: Reference Temp 252. Step 2: Lowest operating temp 3. Step 3: Reference Temp 252. Step 4: Highest operating temp 2. Step 5: Reference Temp 252. Measurement after 5 minutes at each stage. |
| Adhesive Strength of Termination | No terminal detachment, ceramic breakage, etc. | Mounting method: Solder capacitor onto test substrate. Force: 5 N (0402: 2.5 N / 0201: 1 N). Action time: 101 sec. Application direction: Gradually apply force horizontally to the center of the specimen. |
| Substrate Bending Test | Appearance: No defects or abnormalities. | Mounting method: Reflow solder capacitor on P.C. board and bend 1 mm. C/C: |
| Solderability | 95% of terminations should be uniformly and continuously soldered. | Solder: Sn-3.0Ag-0.5Cu (lead-free solder). Flux: Isopropyl alcohol Rosin 25% solid solution. Soldering temperature: 2455C. Dwell time: 20.5s. Soldering position: Until both ends are completely wetted. |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance change: X7R/X5R: 7.5%. Q Factor/Dissipation Factor: Same as initial value. Insulation Resistance: Same as initial value. Voltage Proof: No defects or abnormalities. | Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Solder bath method. Solder type: Sn-3.0Ag-0.5Cu (Lead Free Solder). Test temperature: 2605. Test time: 101s. Preheating temperature: 110 to 140. Preheating time: 1 minute. Post-treatment: Stand at room temperature for 242 hours. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 7.5%. Q Factor/Dissipation Factor: Same as initial value. Insulation Resistance: Same as initial value. | Mounting method: Solder capacitor onto test substrate. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Temperature cycle: 5 cycles. Step 1: Lowest Temp 3, 303 min. Step 2: Room Temp 2~5 min. Step 3: Highest Temp 3, 303 min. Step 4: Room Temp 2~5 min. Post-treatment: Stand at room temperature for 242 hours. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q Factor/Dissipation Factor: 16V: 7% or 2x initial value; 25V: 5% or 2x initial value (whichever is greater). Insulation Resistance: 500M or R.C5s (whichever is smaller). | Mounting method: Reflow solder capacitor on P.C. board. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Test temperature: 402. Test humidity: 90%RH to 95%RH. Test time: 50024 hours. Test voltage: Rated voltage (not exceeding 630V). Max charging/discharging current: 50mA. Voltage conditioning: 1 hour at test temp and voltage, then 242 hours at ambient conditions before measurement. |
| Life Test | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q Factor/Dissipation Factor: 16V: 7% or 2x initial value; 25V: 5% or 2x initial value (whichever is greater). Insulation Resistance: X5R/X7R: 1G or R.C50s (whichever is smaller). | Mounting method: Solder capacitor onto test substrate. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Test temperature: Highest operating temperature 3. Test time: 100012 hours. Test voltage (life): 100% R.V. Max charging/discharging current: 50mA. Voltage conditioning: 1 hour at test temp and voltage, then 242 hours at ambient conditions before measurement. |
2509180925_HRE-CGA0603X7R104K250JT_C6119861.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
