<
>
Specifications
Voltage Rating:
10V
Capacitance:
100nF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
CGA0201X5R104K100ET
Package:
0201
Key Attributes
Model Number:
CGA0201X5R104K100ET
Product Description
Product Overview
The CGA0201X5R104K100ET is a multilayer ceramic capacitor (MLCC) with X5R temperature characteristics. It offers a capacitance of 100nF and a rated voltage of 10Vdc. Designed for surface mounting, this capacitor is suitable for a wide range of electronic applications.
Product Attributes
- Brand: CGA
- Model: CGA0201X5R104K100ET
- Packaging: Tape & Reel (180mm diameter)
Technical Specifications
| Item | Specification | Test Method (Reference Standard: JIS C 5101, IEC60384) |
|---|---|---|
| Dimensions | Length: 0.60+0.10/-0.03 mm Width: 0.30+0.10/-0.03 mm Thickness: 0.30+0.10/-0.03 mm Dielectric Ceramic Thickness: 0.1~0.25 mm | Micrometer measurement |
| Rated Values | Temperature Characteristic: X5R Capacitance: 100nF Capacitance Tolerance: 10% Rated Voltage: 10Vdc Temperature Range: -55 to +85 | As specified |
| Appearance | No defects or abnormalities. | Visual (microscope) inspection |
| Voltage Proof | No defects or abnormalities. Test Voltage: 250% RV (for RV50V) | 1 to 5 seconds duration, Max 50mA current |
| Insulation Resistance (I.R.) | 4G (for X7R/X5R) | 25, Between terminals, Test Voltage 500V: Rated Voltage, >500V: 500V, 1 minute charge time, Max 50mA current |
| Capacitance | Within specified tolerance. | 25, Frequency and Voltage as specified |
| Quality Factor / Dissipation Factor (D.F.) | 104C103 : 5.0% (for X7R/X5R) | 120Hz24Hz, 0.5V0.1Vrms |
| Temperature Characteristics of Capacitance | X5R: 15% | Measured at specified temperature steps after thermal equilibrium |
| Adhesive Strength of Termination | No termination peeling, ceramic breakage, etc. | 5 N force, 101 sec duration, applied horizontally |
| Substrate Bending Test | Appearance: No defects or abnormalities. C/C: 10% (for X7R/X5R General Series) | Capacitor reflow soldered on PCB, bent 1 mm |
| Solderability | 95% of terminations shall be uniformly and continuously soldered. | Sn-3.0Ag-0.5Cu solder, 25% solid Rosin flux, 2455C, 20.5s dwell time |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance Change: 7.5% (for X7R/X5R) Dissipation Factor: Same as initial value. Insulation Resistance: Same as initial value. Voltage Proof: No defects or abnormalities. | Pre-treatment: 150+0/-10C for 1 hr, then 242 hrs at room temp. Solder bath method, Sn-3.0Ag-0.5Cu, 2605C, 101s dwell time, 110-140C preheat for 1 min. Post-treatment: 242 hrs at room temp. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance Change: 7.5% (for X7R/X5R) Dissipation Factor: Same as initial value. Insulation Resistance: Same as initial value. | Pre-treatment: 150+0/-10C for 1 hr, then 242 hrs at room temp. 5 cycles: -55 (303 min) -> Room Temp (2-5 min) -> +85 (303 min) -> Room Temp (2-5 min). Post-treatment: 242 hrs at room temp. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance Change: 12.5% (for X5R/X7R) Dissipation Factor: 7% or 2x initial value (for 16V), 5% or 2x initial value (for 25V) Insulation Resistance: 500M or R.C5s (whichever is smaller) | Pre-treatment: 150+0/-10C for 1 hr, then 242 hrs at room temp. Test: 402, 90%-95%RH, 50024 hrs, Rated Voltage. Voltage conditioning for 1 hr, then 242 hrs at ambient conditions before measurement. |
| Life Test | Appearance: No defects or abnormalities. Capacitance Change: 12.5% (for X5R/X7R) Dissipation Factor: 7% or 2x initial value (for 16V), 5% or 2x initial value (for 25V) Insulation Resistance: 1G or R.C50s (whichever is smaller) | Pre-treatment: 150+0/-10C for 1 hr, then 242 hrs at room temp. Test: Max operating temp 3, 100012 hrs, 100% R.V. Voltage conditioning for 1 hr, then 242 hrs at ambient conditions before measurement. |
| Packaging Quantity | 15,000 pcs per reel | 180mm reel |
2509180925_HRE-CGA0201X5R104K100ET_C6119757.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
