Product Overview
The CD110 series plug-in aluminum electrolytic capacitors are designed for general-purpose applications, offering reliable performance within a wide operating temperature range of -40 to +105. These capacitors feature a black sleeve with white lettering for clear identification and are suitable for various electronic circuits requiring stable capacitance and low leakage current. They are manufactured by Shenzhen Hongruikai Electronic Technology Co., Ltd. and adhere to industry standards.
Product Attributes
- Brand: HRK (Shenzhen Hongruikai Electronic Technology Co., Ltd.)
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| Ours P/N (HRK Part Number) | Series | Rated Capacitance (uF) | Rated Voltage (V) | Product Dimensions (mm) | Capacitance Tolerance (%) | Dissipation Factor (tan, max %) | Leakage Current (uA, max) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms) (105, 100KHz) | Durability (Hrs, at 105) | |
| Diameter (D) | Height (L) | |||||||||||
| CD110 | CD110 | 33 | 400 | 13 | 17 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | |
General Specifications
| Item | Test Conditions/Method | Criteria |
|---|---|---|
| Capacitance (CAP) | Series Equivalent Circuit, 120Hz, Rated Voltage | Within rated capacitance tolerance |
| Dissipation Factor (DF) | - | Max value in Table-1 |
| Leakage Current (LC) | Test circuit as shown, rated voltage + 1000 resistor for 2 min | Max value in Table-1 |
| Surge Voltage | 15~35, Protective resistor (10050)/CR (K), 305s charge, 5.50.5s discharge, 1000 cycles | Capacitance change: 15% of initial value DF: specification value LC: specification value Appearance: No visible abnormality |
| Temperature Characteristics | -40 to +105 | Impedance ratio, Capacitance change rate, DF, LC within specified limits |
| Lead Pull Strength | Specified N {kgf} for different lead diameters | No visible appearance change, no lead breakage or loosening |
| Lead Bending Strength | Specified N {kgf} for different lead diameters, 90 rotation | No visible appearance change, no lead breakage or loosening |
| Vibration Test | 10~55Hz, 1.5mm amplitude, 2 hours per direction (6 hours total) | Capacitance stable, change: 5% of initial value, Appearance: No defects |
| Solderability | Flux (25% rosin), 5~10s immersion, Solder temp 2455 | 90% of immersed lead surface covered with new tin |
| Endurance | Rated voltage and ripple current at max temp for rated life | Capacitance change: 20% of initial value DF: 2x specification value LC: specification value Appearance: No abnormality |
| High Temperature Storage | 1052, no voltage, 1000+48/-0 hours | Capacitance change: 20% of initial value DF: 2x specification value LC: specification value Appearance: No abnormality |
| Anti-explosion | AC or DC voltage test | Safety vent opens, no flame; or vent does not open after 30 min |
Operating Temperature Range
| Rated Voltage | Temperature Range |
|---|---|
| 6.3 ~ 500 VDC | -40 ~ +105 |
Packaging Information
| Product Size DxL(mm) | Bags per Inner Box | Inner Boxes per Outer Box | Pieces per Outer Box | Inner Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 3200 | 290*225*295 | 470*315*320 |
Usage Precautions
1. Aluminum electrolytic capacitors are polarized; ensure correct polarity. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity is uncertain.
2. Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can cause damage. Use at rated voltage for optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for short periods.
3. Ripple current should be less than the rated value. Exceeding the rated ripple current can cause overheating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage should not exceed the rated working voltage.
4. Operate within the rated temperature range. Operation above the upper limit significantly reduces lifespan or may activate the safety vent. Operation at room temperature ensures a longer lifespan; lifespan doubles for every 10C decrease in ambient temperature.
5. Long-term storage can increase leakage current, especially at higher temperatures. Store in a suitable environment. Leakage current will decrease after applying voltage. If high leakage current affects the circuit, pre-charge the capacitor before use.
6. Not suitable for circuits with frequent charge/discharge cycles, as capacity may decrease due to anode oxidation or damage from heat generated during cycles.
7. Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage. Ensure good soldering, appropriate PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
8. During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature. Use appropriate cleaning agents that do not contain halogenated organic compounds. If cleaning is necessary, ensure the agent guarantees capacitor quality. Do not store in cleaning solution or sealed containers after cleaning. Dry with hot air (not exceeding the capacitor's upper temperature limit) for over 10 minutes.
9. Do not use fixing agents or coatings containing halogenated organic compounds. Avoid sealing the capacitor's sealing area completely with fixing or coating agents.
10. Recommended storage: 35, 75% RH, away from direct sunlight. Shelf life is 12 months from the manufacturing date. If stored beyond 12 months, check electrical characteristics and solderability.
11. For disposal, contact a local industrial waste disposal provider.
12. Refer to EIAJ RCR-2367B for more details.
2508181355_HRK-CD110107M2G1832VFL_C7499972.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
