<
>
Specifications
Voltage Rating:
35V
Capacitance:
22uF
Temperature Coefficient:
X5R
Tolerance:
±20%
Mfr. Part #:
CGA0805X5R226M350MT
Package:
0805
Key Attributes
Model Number:
CGA0805X5R226M350MT
Product Description
Product Overview
This product specification applies to multilayer chip ceramic capacitors. These capacitors offer reliable performance and are designed for various electronic applications.
Product Attributes
- Brand: CGA
- Material: Ceramic Dielectric
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Model | Dimensions (mm) (L*W*T) | Temperature Characteristic | Capacitance | Capacitance Tolerance | Rated Voltage | Packaging |
| CGA0805X5R226M350MT | 2.000.20 * 1.250.20 * 1.250.20 | X5R (-55 to 85, 15%) | 22uF | 20% | 35Vdc | T 180mm Reel, 3,000 pcs |
| Test Item | Specification | Test Method (Ref. Standard: JIS C 5101, IEC60384) |
| Capacitance | Within specified tolerance. | Test Voltage: 0.5-5.0Vrms (for C1000pF), 1.00.2Vrms (for C>1000pF and C10uF), 0.5V0.1Vrms (for C>10uF) |
| Insulation Resistance (I.R.) | 10 G or RC 500F (whichever is smaller) | Test Voltage: RV50V (300% RV), 50VRV250V (200% RV), 250VRV630V (150% RV) |
| Voltage Proof | Withstand test voltage without defects or abnormalities. | Test Time: 1 to 5 seconds |
| Quality Factor / Dissipation Factor (Q or D.F.) | Refer to table for different materials and frequencies. | Frequency: 1.00.1MHz, 1.00.1KHz, 120Hz24Hz |
| Appearance | No defects or abnormalities. Visual (microscope) inspection. | |
| Dimensions | Conform to specifications. Micrometer inspection of physical dimensions. | |
| Temperature Characteristics of Capacitance | C/C | Measurement temperature stages with 5 min stabilization. |
| Substrate Bending Test | No terminal detachment, ceramic breakage, etc. | Apply gradual force to the center of the specimen horizontally on the P.C. board. |
| Adhesive Strength of Termination | No terminal detachment, ceramic breakage, etc. | Apply gradual force to the center of the specimen horizontally on the P.C. board. |
| Solderability | 95% of terminals should be uniformly and continuously soldered. | Solder bath method. Solder: Sn-3.0Ag-0.5Cu (Lead Free Solder). Soldering Temperature: 2455C. Dwell time: 20.5s. |
| Resistance to Soldering Heat | No cracks in appearance. | Solder bath method. Solder: Sn-3.0Ag-0.5Cu (Lead Free Solder). Soldering Temperature: 2605C. Dwell time: 20.5s. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 15% | 5 cycles. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then rest at room temperature for 242 hours. Post-treatment: Rest at room temperature for 242 hours. |
| Insulation Resistance | Same as initial value. | Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then rest at room temperature for 242 hours. Post-treatment: Rest at room temperature for 242 hours. |
| Capacitance | Same as initial value. | Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then rest at room temperature for 242 hours. Post-treatment: Rest at room temperature for 242 hours. |
| Quality Factor / Dissipation Factor | Same as initial value. | Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then rest at room temperature for 242 hours. Post-treatment: Rest at room temperature for 242 hours. |
| Durability Test (Life) | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 12.5%. Insulation Resistance: 1G or R.C 50s (whichever is smaller). Quality Factor / Dissipation Factor: 16V: 7% or 2 times initial value; 25V: 5% or 2 times initial value (whichever is greater). | Test Voltage (Life): 100% R.V. Test Time: 100012 hours. Test Temperature: Max operating temperature 3. Voltage Conditioning: 1 hour at test temperature and voltage. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 15%. Insulation Resistance: X7R: 1G or R.C10s; X5R: 1G or R.C 50s (whichever is smaller). Quality Factor / Dissipation Factor: 16V: 7% or 2 times initial value; 25V: 5% or 2 times initial value (whichever is greater). | Test Time: 50024 hours. Test Temperature: 402. Test Humidity: 90%RH to 95%RH. Voltage Conditioning: 1 hour at test temperature and voltage. |
Packaging Specifications
| Size (mm) | Carrier Tape Material | Reel Size | Packs/Box | Boxes/Carton |
| 01005 | Paper Tape | 7" | 5 | 12 |
| 0201 | Paper Tape | 7" | 5 | 12 |
| 0402 | Paper Tape | 7" | 5 | 12 |
| 0603 | Paper Tape | 7" | 5 | 12 |
| 0805 | Paper Tape/Plastic Tape | 7" | 5 | 12 |
| 1206 | Paper Tape/Plastic Tape | 7" | 5 | 12 |
| 1210 | Plastic Tape | 7" | 5 | 12 |
Standard packaging uses 180mm (7") reels. 5 reels per box, 12 boxes per carton. Custom packaging is available upon request.
2403281426_HRE-CGA0805X5R226M350MT_C6119901.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
