<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
20mm
Voltage Rating:
400V
Diameter:
13mm
Mfr. Part #:
CD110476M2G1320VFL
Package:
Through Hole,D13xL20mm
Key Attributes
Model Number:
CD110476M2G1320VFL
Product Description
Product Overview
The CD110 series of plug-in aluminum electrolytic capacitors from Hongruikai Electronics Technology Co., Ltd. are designed for general-purpose applications. These capacitors feature a black sleeve with white lettering and are rated for a wide operating temperature range of -40 to +105. They are suitable for applications requiring stable capacitance and reliable performance under various environmental conditions. The product adheres to SJ/T11000-2023 standards and is manufactured in Shenzhen, China.
Product Attributes
- Brand: Hongruikai ()
- Series: CD110
- Type: Plug-in Aluminum Electrolytic Capacitor
- Sleeve Color: Black
- Marking Color: White
- Origin: Shenzhen, China
- Environmental Compliance: RoHS, REACH SVHC, 2006/22/EC (PFOA/PFOS), 2005/84/EC (16P), ZEK 01.2-08 (PAHs), Sony SS-00259 (18th Edition)
Technical Specifications
| Hongruikai P/N | Series | Rated Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance (%) | Dissipation Factor (max, %) | Leakage Current (max, uA) | Surge Voltage (V) | Equivalent Impedance (, 20, 100KHz) | Rated Ripple Current (mA rms, 105, 100KHz) | Durability (Hrs, at 105) | Diameter (mm) | Height (mm) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CD110 | CD110 | 33 | 400 | -20~+20 | 24 | 436 | 450 | 190 | 2,000 | 13 | 17 | 0.6 |
General Specifications
| Item | Test Condition/Method | Judgment Standard |
|---|---|---|
| Capacitance (CAP) | Test Circuit: Series Equivalent Circuit; Test Frequency: 120Hz; Test Voltage: Rated Voltage | Within the error range of rated capacitance (see Table-1 for error range) |
| Dissipation Factor (DF) | Less than or equal to the dissipation factor tangent value in Table-1 | |
| Leakage Current (LC) | Apply rated DC voltage across the capacitor with a 100010 series resistor for 2 minutes, then measure leakage current. | Less than or equal to the leakage current value in Table-1 |
| Surge Voltage | At 15~35, apply surge voltage through a protection resistor of (10050)/CR (K). Charge for 305 sec, discharge for 5.50.5 min per cycle for 1000 cycles. | Capacitance change rate: within 15% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no visible abnormal appearance. |
| Temperature Characteristics | Stage 1: 255 (thermal stabilization); Stage 2: -253 (thermal stabilization); Stage 3: -403 (thermal stabilization); Stage 4: 255 (thermal stabilization); Stage 5: +1053 (thermal stabilization) | Impedance ratio (Stage 2, 3 vs Stage 1): not exceeding upper table values; Capacitance change rate (vs Stage 1): not exceeding 25%; Dissipation factor: not exceeding 5 times specification value; Leakage current: not exceeding specification value. |
| Lead Tensile Strength | Apply tensile force as shown in table for 101 sec. | Lead diameter (mm): 0.45, 0.5, 0.6, 0.8, 1.0; Tensile Strength N {kgf}: 5 {0.51}, 10 {1.0}, 20 {2.0}; Bending Strength N {kgf}: 2.5 {0.25}, 5 {0.51}, 10 {1.0} |
| Lead Bending Strength | Fix capacitor vertically on a jig. Apply specified tensile force on lead in the lead direction. Rotate 90 degrees in one direction and return to original position within 2-3 seconds, then rotate 90 degrees in the opposite direction and return to original position for one cycle. | No obvious appearance change, no lead breakage or loosening. |
| Vibration Test | 2 hours in each direction on a vibration tester, total 6 hours. Frequency range: 10~55Hz; Amplitude: 1.5mm; Sweep rate: approx. 1 min from 10 to 55 and back to 10 Hz. | Capacitance test: stable measured value; Capacitance change: within 5% of initial value; Appearance: no appearance defects. |
| Solderability | Dip capacitor terminals into a rosin solution (25% by weight) for 5~10 seconds, then dip into solder at 2455 until approx. 1.5~2.0mm from the capacitor body. | Surface area of leads immersed in solder should be over 90% and covered with new tin. |
| Resistance to Soldering Heat | Dip terminals below 1.5~2.0mm from the body into solder solution at 2605 or 35010, hold for 101 or 3~4 seconds respectively, then remove. Measure after placing in normal temperature and humidity for 1~2 hours. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Steady State Damp Heat | Place in an environment of 405 and 90~95% relative humidity for 2408 hours, then place in normal temperature and humidity for 1~2 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 1.2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Rapid Temperature Change | Place capacitor in a thermal shock chamber. Temperature changes according to the cycle: +25 (3min) -40 (30min) +25 (3min) +105 (30min) +25 (3min). Perform 5 cycles, then measure after placing in normal temperature and humidity for 1~2 hours. | Capacitance change rate: within 10% of initial value; Dissipation factor: not greater than specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Endurance | Apply rated voltage and ripple current at the upper limit temperature for the rated life. Measure after placing in standard environment for 1~2 hours. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| High Temperature Storage | Store in an environment of 1052 without voltage for 1000+48/-0 hours. Recover for 16 hours before measurement. | Capacitance change rate: within 20% of initial value; Dissipation factor: not exceeding 2 times specification value; Leakage current: not greater than specification value; Appearance: no significant abnormal appearance. |
| Anti-explosion | a) AC Power Test Method: Apply 0.7 times rated voltage or 250V AC (whichever is lower) at 50 or 60 Hz across the capacitor. b) DC Power Test Method: Apply 1A current for diameter 22.4mm, 10A current for diameter > 22.4mm, with reverse DC voltage. | Anti-explosion valve opens, no flame should occur. If the internal anti-explosion valve does not open after 30 minutes of applied voltage, the performance is considered satisfactory. |
Operating Temperature Range
| Rated Voltage | Temperature Range |
|---|---|
| 6.3 ~ 500 VDC | -40 ~ +105 |
Packaging
| Product Size DxL(mm) | Bag Quantity per Inner Box | Inner Boxes per Outer Box | Total Pieces per Outer Box | Inner Box Dimensions (mm) | Outer Box Dimensions (mm) |
|---|---|---|---|---|---|
| 13*17 | 200 | 16 | 3200 | 290*225*295 | 470*315*320 |
Usage Precautions
- Aluminum electrolytic capacitors are polarized; use with correct polarity. Reverse connection can cause short circuits or damage. Use non-polarized capacitors if polarity may be reversed or unknown.
- Do not apply reverse voltage or DC voltage exceeding the rated voltage. Exceeding rated voltage significantly increases leakage current and can cause damage. Use at rated voltage for optimal lifespan. Surge voltage is the maximum voltage the capacitor can withstand for a short duration.
- Ripple current should be less than the rated value. Exceeding the rated ripple current causes overheating, capacitance reduction, and shortened lifespan. The sum of the peak ripple voltage and DC voltage should be less than the rated working voltage.
- Use capacitors within the rated temperature range. Operating above the upper limit temperature drastically reduces lifespan or may activate the anti-explosion valve. Operation at room temperature ensures a longer lifespan. For every 10 decrease in ambient temperature, lifespan doubles.
- After long-term storage, leakage current may increase, especially at higher storage temperatures. Store in a suitable environment. If leakage current is problematic, pre-charge the capacitor before use.
- Capacitors are not suitable for circuits with frequent charge/discharge cycles. Capacitance may decrease due to oxidation of the negative electrode's oxide film, or damage may occur from heat generated during charge/discharge.
- Improper installation or stress on leads can damage the internal structure, leading to high leakage current or leakage issues. Ensure good soldering, correct PCB hole spacing, do not bend leads excessively, and avoid bending or twisting the capacitor body during soldering.
- During tin dipping or soldering, the sleeve may crack or shrink due to excessive time or temperature.
- Do not use halogenated organic cleaning agents. If cleaning is necessary, use agents that guarantee capacitor quality. After cleaning, do not store in the cleaning solution or sealed containers. Dry with hot air (not exceeding the capacitor's upper temperature limit) for over 10 minutes.
- Do not use halogenated organic fixing agents or coating agents. Do not seal the capacitor's sealing area completely with fixing or coating agents.
- Recommended storage conditions: below 35, relative humidity less than 75% RH, away from direct sunlight. Shelf life is 12 months from the date of manufacture. If stored beyond 12 months, check electrical characteristics and solderability.
- For disposal of capacitors, contact a local industrial waste disposal service.
- Refer to EIAJ RCR-2367B for more details.
2508181355_HRK-CD110476M2G1320VFL_C7499959.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
