<
>
Specifications
Voltage Rating:
25V
Capacitance:
10uF
Temperature Coefficient:
X5R
Tolerance:
±20%
Mfr. Part #:
CGA0603X5R106M250JT
Package:
0603
Key Attributes
Model Number:
CGA0603X5R106M250JT
Product Description
Product Overview
The CGA0603X5R106M250JT is a multilayer ceramic capacitor designed for general-purpose applications. It features an X5R temperature characteristic, a capacitance of 10F, and a rated voltage of 25Vdc. This capacitor is supplied in tape and reel packaging for automated assembly.
Product Attributes
- Brand: CGA
- Temperature Characteristic: X5R
- Packaging: Tape and Reel (180mm)
Technical Specifications
| Part Number | Dimensions (mm) | Capacitance | Voltage | Temperature Range | Capacitance Change | Tolerance | Packaging Quantity |
|---|---|---|---|---|---|---|---|
| CGA0603X5R106M250JT | 1.600.20 (L) x 0.800.20 (W) x 0.800.20 (T) | 10F | 25Vdc | -55~+85 | 15% | 20% | 4,000 |
| Test Item | Specification | Test Method (Reference Standard: JIS C 5101, IEC60384) |
|---|---|---|
| Appearance | No defects or abnormalities. | Visual (microscope) inspection. |
| Dimensions | Conforms to specifications. | Micrometer inspection of physical dimensions. |
| Voltage Proof | Withstand test voltage without defects or abnormalities. (RV50V: 250% RV; 50VRV250V: 200% RV; etc.) | Test time: 1 to 5 seconds. Max charging/discharging current: 50mA. |
| Insulation Resistance (I.R.) | 100M (for X7R/X5R) | Test temp: 25. Between terminals. Test voltage: 500V: Rated Voltage; >500V: 500V. Charging time: 1 minute. Max charging/discharging current: 50mA. |
| Capacitance | Within specified tolerance. | Measurement temp: 25. |
| Q factor / Dissipation Factor (D.F.) | C10F: 1.0 KHz, 1.00.2Vrms; C>10F: 120Hz24Hz, 0.5V0.1Vrms. (Specific values for D.F. vary by capacitance range). | N/A |
| Temperature Characteristics of Capacitance | X5R: 15%; X7R: 15% | Measure capacitance at specified temperature stages after thermal equilibrium. Steps: 25, lowest operating temp, 25, highest operating temp, 25. |
| Adhesive Strength of Termination | No termination peeling, ceramic breakage, etc. | Welded to test substrate. Force: 5 N (0.20-0.65mm thickness). Time: 101s. Direction: Horizontal to P.C. board. |
| Substrate Bending test | Appearance: No defects or abnormalities. C/C | Reflow soldered onto P.C. board and bent 1 mm. |
| Solderability | 95% of terminals should be uniformly and continuously soldered. | Solder: Sn-3.0Ag-0.5Cu (Lead-free). Flux: Isopropyl alcohol Rosin 25% solid solution. Solder temp: 2455C. Dwell time: 20.5s. |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance change: X7R/X5R: 7.5%. Q factor/D.F.: Same as initial. Insulation Resistance: Same as initial. Voltage Proof: No defects or abnormalities. | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Solder bath method: Sn-3.0Ag-0.5Cu. Test temp: 2605C. Test time: 101s. Preheating temp: 110 to 140. Preheating time: 1 minute. Post-treatment: Stand at room temp for 242 hours. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 7.5%. Q factor/D.F.: Same as initial. Insulation Resistance: Same as initial. | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Cycle: 5 cycles. Steps: Lowest temp (-3), Room temp (2~5 min), Highest temp (+3), Room temp (2~5 min). Time at temp: 303 min. Post-treatment: Stand at room temp for 242 hours. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q factor/D.F.: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: 500M or R.C5s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Test temp: 402. Test humidity: 90%RH to 95%RH. Test time: 50024 hours. Test voltage: Rated voltage (not exceeding 630V). Voltage conditioning applied. |
| Life | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q factor/D.F.: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: X5R/X7R: 1G or R.C50s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hour, then stand at room temp for 242 hours. Test temp: Highest operating temp 3. Test time: 100012 hours. Test voltage: 100% R.V. Voltage conditioning applied. |
2509180925_HRE-CGA0603X5R106M250JT_C6119874.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
