<
>
Specifications
Voltage Rating:
100V
Capacitance:
100nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
CGA1206X7R104K101MT
Package:
1206
Key Attributes
Model Number:
CGA1206X7R104K101MT
Product Description
Product Overview
The CGA1206X7R104K101MT is a multi-layer ceramic capacitor with X7R temperature characteristics, offering a capacitance of 100nF and a rated voltage of 100Vdc. It is designed for various electronic applications, adhering to strict quality and testing standards.
Product Attributes
- Brand: CGA (implied from part number)
- Temperature Characteristic: X7R
- Capacitance: 100nF
- Rated Voltage: 100Vdc
- Package Size: 1206
- Tolerance: 10% (Capacitance)
- Packaging: Tape & Reel (180mm)
Technical Specifications
| Item | Specification | Test Method (Reference Standard: JIS C 5101, IEC60384) |
| Appearance | No defects or abnormalities. | Visual (microscope) inspection. |
| Dimensions | Conforms to specifications. | Micrometer inspection of physical dimensions. |
| Voltage Proof | Withstand test voltage without defects or abnormalities. | X7R/X5R: 250% RV (RV50V), 200% RV (50VRV250V), 150% RV (250VRV630V), 120% RV (630VRV1000V). Test time: 1-5s. Max charge/discharge current: 50mA. |
| Insulation Resistance (I.R.) | 4G (X7R/X5R) | Test temp: 25. Between terminals. Test voltage: 500V: RV; >500V: 500V. Charge time: 1 min. Max charge/discharge current: 50mA. |
| Capacitance | Within specified tolerance. | Measurement temp: 25. Frequency/Voltage as per material. |
| Q Factor / Dissipation Factor (D.F.) | X7R/X5R: 10uF: 3.5% (C103), 5.0% (104C>103), 10% (104>C106). C>10uF: 15%. | Frequency/Voltage as per material. |
| Temperature Characteristics of Capacitance | X7R: 15% | Measurement at specified temperature stages after thermal equilibrium. Steps: 252 (ref), Min operating temp 3, Max operating temp 2. |
| Adhesive Strength of Termination | No termination peeling, ceramic breakage, etc. | Welded to test substrate. Force: 5N (0402:2.5N / 0201:1N). Time: 101s. Direction: Horizontal to PCB center. |
| Substrate Bending Test | Appearance: No defects or abnormalities. C/C: X7R/X5R: 10% (General series), 12.5% (High capacitance series). | Reflow soldered on PCB, then bent 1mm. |
| Solderability | 95% of terminations uniformly and continuously soldered. | Solder: Sn-3.0Ag-0.5Cu (lead-free). Flux: Isopropyl alcohol Rosin 25% solid solution. Temp: 2455C. Dwell: 20.5s. Immersion: Until both ends fully wetted. |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance change: X7R/X5R: 7.5%. Q/DF: Same as initial. Insulation Resistance: Same as initial. Voltage Proof: No defects or abnormalities. | Pre-treatment: Heat at 150+0/-10C for 1 hr, then rest at room temp 242 hrs. Solder bath method. Solder: Sn-3.0Ag-0.5Cu. Temp: 2605C. Time: 101s. Preheating: 110-140C, 1 min. Post-treatment: Rest at room temp 242 hrs. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance change: X7R/X5R: 7.5%. Q/DF: Same as initial. Insulation Resistance: Same as initial. | Pre-treatment: Heat at 150+0/-10C for 1 hr, then rest at room temp 242 hrs. 5 cycles. Steps: Min temp 3 (303 min), Room temp (2-5 min), Max temp 3 (303 min), Room temp (2-5 min). Post-treatment: Rest at room temp 242 hrs. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q/DF: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: 500M or RC5s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hr, then rest at room temp 242 hrs. Test temp: 402. Humidity: 90%-95%RH. Time: 50024 hrs. Test voltage: Rated voltage (630V). Max charge/discharge current: 50mA. Voltage conditioning: 1 hr at test temp/voltage, then 242 hrs at ambient before measurement. |
| Life Test | Appearance: No defects or abnormalities. Capacitance change: X5R/X7R: 12.5%. Q/DF: 16V: 7% or 2x initial; 25V: 5% or 2x initial (whichever is greater). Insulation Resistance: X5R/X7R: 1G or RC50s (whichever is smaller). | Pre-treatment: Heat at 150+0/-10C for 1 hr, then rest at room temp 242 hrs. Test temp: Max operating temp 3. Time: 100012 hrs. Test voltage: 100% R.V. Max charge/discharge current: 50mA. Voltage conditioning: 1 hr at test temp/voltage, then 242 hrs at ambient before measurement. |
Packaging Specifications
| Packaging Method | Packaging Quantity (pcs) | Reel Diameter |
| Tape & Reel | 3,000 | 180mm |
Note: Further packaging details for various sizes and material types (paper tape, plastic tape) are available in the original document, including dimensions and quantities per reel/box/case.
2504101957_HRE-CGA1206X7R104K101MT_C47117450.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
